Thanks for the video, as I am looking at going to a mechanical pump. Please show a video of mounting a mechanical pump and how to run a cable drive rear pump!!!
Might have to make a new one at some point but here is a throwback video of the very first kit going on Leroy! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kulxUrJpJ5w.html
I tell you could make that would be perfect for a mechanical fuel pump drive. Implement a pump drive that could be run from the serpentine belt system. Many systems use idler/tension pulleys, some will even have direction changing pulleys that run inside the serpentine. Many have a second drive say like a 2005 GTO that could use the A/C belt system to drive a mechanical pump.
The problem with the serpentine belt is the possibility of belt slip under high load or the belt coming off at high RPM, both times when you absolutely do not want to run out of fuel pressure. A toothed belt with a short run should mitigate both of those issues. The serpentine system might also be a pain to get the drive ratio set up correctly.
You could have said it's exactly like over or under driving a roots 8:71 supercharger. Small pulley on blower big on bottom = over drive ie: faster than engime rpm by x amount Obverse is spinnimg the blower slower than crank rpm. Same ratio concept except the pumps have a specific ideal rpm and ratio March
Hay Doug do u have a catiloge for your parts I'm thinking about doing my first ls swap on my 86 grand prix was just wondering what all do u carry for that type of project
Will the coyote hub work with a 5.4 4v mod motor with an ATI balancer and do you have a mounting bracket for it? I am going to be running motor plates, so should I just build something to mount it to?