Mechanically Stable Monowheel

Подписаться 1,2 млн

Просмотров 305 тыс.

50% 1

Ad: Thanks to PCBWay for sponsoring this video:www.pcbway.com/
I previously built a small MonoWheel which is a single wheel that runs along with one motor driving it. It balances on its edge like rolling a coin. Monowheels have been built large enough for people to ride in, which looks like a fun project.
My monowheel had some stability control which measured the angle of the internals and modified the motor speed. This meant that the internals always remained at one angle instead of oscillating between driving up the inside of the wheel and falling down again, which is what happens if you just run the motor at a constant speed.
But is there an easier way to make a fun radio controlled vehicle which is inherently stable?
CAD & Code: github.com/XRobots/PedrailMon...
You can support me on Patreon, join my Discord, or buy my Merchandise:
***************************
Discord: / discord
Patreon: / xrobots
Merchandise: teespring.com/stores/james-br...
***************************
Other socials:
***************************
Instagram: / xrobotsuk
Twitter: / xrobotsuk
Facebook: / xrobotsuk
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
10% off at www.3dfuel.com/XROBOTS - use code XROBOTS at the cart screen.
Music for your RU-vid videos: share.epidemicsound.com/xrobots
***************************
CAD and Code for my projects: github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: www.3dfuel.com/
Lulzbot 3D Printers: bit.ly/2Sj6nil
Bearings from: simplybearings.co.uk/
Lincoln Electric Welder: bit.ly/2Rqhqos
CNC Router: bit.ly/2QdsNjt
Ryobi Tools: bit.ly/2RhArcD
3D Printer Filament: bit.ly/2PdcdUu
Soldering Iron: bit.ly/2DrNWDR
Vectric CNC Software: bit.ly/2zxpZqv

Наука

Опубликовано:

10 дек 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 729

@akumabito2008 5 месяцев назад

Ahh yes, the famous two-wheeled monowheel... 😂

@Sandux930 5 месяцев назад

You and me Big Wheel, we could rule this city, or just... fight to the death!

@nordishkiel5985 5 месяцев назад

Stereo Wheel would fit, especially with the independent steering and suspension

@Draugo 5 месяцев назад

Yeah not really a monowheel now is it.

@stoatystoat174 5 месяцев назад

Two-wheeled or Twheeled

@janikarkkainen3904 5 месяцев назад

My thoughts exactly. :D

@jaspurr7467 5 месяцев назад

A monowheel with.... two wheels?

@CmdrMartinThompson 5 месяцев назад

Exactly my thoughts 😅, doenst make it any less cool though!

@Eidolon1andOnly 5 месяцев назад

@@CmdrMartinThompsonIt kinda does. It would be much cooler if it had a more accurate name.

@davidaugustofc2574 5 месяцев назад

If you consider the air between both wheels to be a part of the contraption

@Eidolon1andOnly 5 месяцев назад

@@davidaugustofc2574 James' justification for calling this thing a "monowheel" is that the two sections are identical and not mirrored, so therefore the two parts are actually a single part.

@Hunter-ck1zy 5 месяцев назад

@@Eidolon1andOnly yeah but each side is independently driven so it's two separate wheels on a tiltable chassis

@LRBeforeTheInternet 5 месяцев назад

Thats two wheels, James.

@vladimiryan1335 5 месяцев назад

It turned out not to be a monowheel, but a free interpretation of a tracked chassis. Получилось ведь не моноколесо, а вольная интерпритация гусеничного шасси.

@tetronaut88 5 месяцев назад

Aren't these technically two different wheels, making it a bicycle or a Segway type vehicle? Really cool nonetheless!

@TarenGarond 5 месяцев назад

Diwheel is what it's called

@gidi1899 5 месяцев назад

how about a 2-wheel-pendulum (2-pendu)

@XSpamDragonX 5 месяцев назад

@@TarenGarondDicycle

@TarenGarond 5 месяцев назад

@@XSpamDragonX Yeah that is an alternative name, but I think it is usually called Diwheel when the whole contraption is within the borders of the wheel(Especially when not powered by a human).

@AlexandruVoda 5 месяцев назад

they behave more like tank tracks.

@0hellow797 5 месяцев назад

It’s like a mechanical flat tire, it’s very pretty!

@otthh 5 месяцев назад

How is this man able to pump out so many high quality projects? Thank you for all this.

@VEC7ORlt 5 месяцев назад

Ah yes, 'high quality'...

@Zveebo 5 месяцев назад

Having lots of 3D printers!

@shaunstst 5 месяцев назад

Lots of sponsors is how

@computermdms 5 месяцев назад

@@Zveebolots of 3d printers makes is possible but he is still doing a lot of design, coding, integration, and video production for each weekly video

@Zveebo 5 месяцев назад

@@computermdms Sure, but with the huge amount of 3D printing he needs, having multiple fast printers is pretty essential if not to be a bottleneck.

@finndriver1063 5 месяцев назад

Try feet with TPU on the inner edge, and slippery plastic on the outer edge. That way when it leans, it engages extra grip on the driven side but not on the pivot side. That might work, albeit only on slippy floors, and it might slide out of control if you turn without leaning. I do really like the look and function of the pedwheels, they look so steampunky.

@MrSparkefrostie 5 месяцев назад

Had a similar thought, thought thought of TPU on the outer edge

@peterspencer6442 5 месяцев назад

I wonder how it turns if it leans slightly out of the turn, rather than into the turn? It would move the centre of gravity over the faster wheel, I wonder what effect that might have. Awesome work, the jumping motion as it turns looks super cool and gives it a unique Star Wars quirky robot personality :)

@mikosoft 5 месяцев назад

I'd probably tip over more easily

@davydatwood3158 5 месяцев назад

I was wondering this myself. Mikosoft might be right, but the whole point of these projects is to try things and see what happens.

@davidaugustofc2574 5 месяцев назад

The tip over comment might be correct, there's no indication the faster wheel has a lack of grip, so increasing the normal force over it will have no effect. Karts benefit from you leaning to the outside because the inside wheel is always sliding, it contributes nothing to cornering.

@mrharvest 5 месяцев назад

I think you would get better climbing performance if the center of mass was as low down as possible. Also, the swivel mechanism doesn't work for turning on spot but would help reduce slipping (and therefore wear to road surface) for regular turns as the outside wheel track is longer when turning with two parallel wheels

@MrOliver1312 5 месяцев назад

Almost like a tank.....

@wesleyfilips7052 5 месяцев назад

The legs stuck out spinning on the spot is caused by the legs binding from lateral forces im almost sure. Could be fixed with lubrication of the slot or with rubber bands holding the legs in while theyre coming down so that way the guide pushes them out, rather than relying on its own weight to push the feet back in against the friction of the binding.

@wurstelei1356 5 месяцев назад

I also would have the rods move in a square shape instead of a circle with a tilt. So that each side is similar to the one on the ground. In this case it wouldn't matter if it overdrives on one side. The wheel would just snap to the next square face.

@Timestamp_Guy 5 месяцев назад

you should do the maths to make the tilt axis change the speeds of the inner and outer wheel automatically, so you can just steer with the tilt stick and forward. Alternatively, set the tilt amount based on the differential speed of the motors automatically. Either way, it reduces the number of things to adjust independently. Manually controlling both speeds and tilt at the same time seems too much to handle smoothly.

@DigitalJedi 5 месяцев назад

Having it lean out of a turn might also be beneficial, as it puts more of the weight over the faster wheel, hopefully allowing the inner one to slip more easily.

@nerdlord2288 5 месяцев назад

Always impressed with the mechanical engineering side of your builds,gives me inspiration and ideas for my own hobby builds

@arcotkk 5 месяцев назад

Perhaps adding more weight (that maybe counter-shifts to add friction to the outer wheel as you turn) could help with the leaning, and maybe having the wheels angle toward one another near the top slightly could add some overall balance. Just some theories though.

@CharlesVanNoland 5 месяцев назад

The left/right leaning should occur automatically via gyro sensor determining if it's falling/leaning one way or the other, to keep it level. Another idea is to have the legged wheels canted, so the tops of the wheels are closer than the bottoms, to make it more stable by default.

@Simple_But_Expensive 5 месяцев назад

What about a guide to force the sliders to lift when in the flat portion of the circle? Bolt it to the center section, and have it reach around the outside of the sliders. Also, to avoid the problem of the feet having too much friction, replace them with bearings. If you can perfect it, I would love to see a ridable full size version. Perhaps a collaboration with Furze or Miranda?

@gearyae 5 месяцев назад

Yeah, I assumed he had those follower bearings riding in a track at first until the stated problem of them not following the cam. That would make a lot more sense.

@frogz 5 месяцев назад

now make a vehicle with infinite wheels

@TomS699 5 месяцев назад

And then add one more for good measure

@Alkatross 2 месяца назад

RIP 3d filament sponsors

@vell0cet517 5 месяцев назад

Another clever and fun project! I wish you'd make videos where you live-streamed your design/CAD process and talk through your designs as you create them.

@NerdUndStolzDarauf 5 месяцев назад

That would reveal his dark secret, that he is actually a sentient CAD program in a trench coat.

@lucachacha71 5 месяцев назад

That would be awesome +1

@Eutrofication 5 месяцев назад

it looks surprisingly organic! like it would be a great blueprint for a slime looking robot that has a flat bottom. the move where the flat part goes around in a circle looks like a little emote! the leaning gives it quite a lot of personality too; show this to Adam Savage and his puppeteering mates, and he might just know how to give it life!

@HolmesHobbies 5 месяцев назад

What delightful projects you make!

@RAMII19780529 5 месяцев назад

I'm very impressed by the amount of work, engineering, and time you put into these projects. It's always a pleasure to watch your videos. Thank you for doing what you do!

@VanillaGorilla7633 2 месяца назад

This is crazy. Very Impressed with your skills and engineering here! Next level for real.

@JacobPatrick1 5 месяцев назад

I appreciate showing the trial and error. Thank you for showing the real process of development.

@darkhertz7247 5 месяцев назад

Really cool project ! hats off to you man ! Thanks for bringing such things to internet

@Rockhopper1 5 месяцев назад

to stop the inside wheel mech spinning when stuck have auto ratchet lock into the gear wheel, you can print notches on the spacer, as soon as it detects it will be spinning, a peg shoots out and engages with a notch, stopping the spinning and allowing momentum and inertia to force the carriage forward. If you are clever you do not even need a solenoid or a motor to do this, just a counterweight and lever mech can do this, love this design,

@bradwilsey9426 5 месяцев назад

Always fun videos. Thanks for the entertainment. This guys good!

@nevernether3368 5 месяцев назад

Seeing a full sized version would be amazing. Awesome content man

@christophertnugent9100 5 месяцев назад

Can we take a moment to once again marvel at how brilliant James must be to design each of these from top to bottom, plus how diligent he must be in piecing them all together, with a special nod to how great his narration is?

@rogerdueck9725 5 месяцев назад

That is awesome! Probably the coolest idea on your channel for a while! Would love to see you put a weighted balancing wheel in it so that the middle section doesn't turn around and gets stuck in the grass. And then I would love to see that thing build in real size...plus you can make it a bit wider for more stability

@empmachine 5 месяцев назад

It's really cool when you show us the various fails of the awesome designs you make. Too many makers (well.. I'd call you a "Legit Hard-core Inventor".. but I digress...) only show how the creation works.. and learning from success sucks... Failure, now that's how you really learn, and you totally nail that education (when failure does happen to happen) in a way that resonates with both my inner engineer and artist! Like it was me doing/learning from it with my own hands and brain.. sooo cool! You rock!

@bowieinc 5 месяцев назад

Super cool. Since the center stays put until it’s stuck, perhaps run a couple bars from the center over the top so if it does get stuck, the top bars would come down and around from the top and give it a push forwards by running it backwards.

@IDisposable 5 месяцев назад

Like a dragster wheelie bar

@SproutyPottedPlant 5 месяцев назад

That colour scheme…the first one with the white feet looks like one of Eggman’s creations! Add a small green and blue part and it would look like E102 Gamma!!

@RupertBruce 5 месяцев назад

About 20 years ago someone asked me to build a self-returning ball. The design was like a spherical version of this but with actuators where you have legs. That is a lot of actuators! Whilst your monowheel legs make it stable, they resist movement. The actuators deform the surface to push the ball along. My ball never returned.

@RupertBruce 5 месяцев назад

@9:40 Mind blown how well that works with passive legs! You make it look easy!

@RupertBruce 5 месяцев назад

Tilting would be good for high speed steering with a small difference in speed for the 2 sides of the monowheel

@Madpegasusmax 5 месяцев назад

I really liked this concept , thumbs up

@bluekiwi42nd12 5 месяцев назад

I wonder how it would control if you had the turning command control a mixture of the lean and differential wheel velocity. Probably not useful for sharp low speed turns but could work for smooth higher speed corners. Also I had a wild idea that you could make a large scale version where you are seated in the space in the centre

@willdarling1 5 месяцев назад

+1 ....or just fed from a small acceleromator?

@bluekiwi42nd12 5 месяцев назад

Ya or could use the accelerometer to blend between a low speed tank like turn and high speed lean turn?

@imacomputer1234 5 месяцев назад

This is awesome! just needs more mass at the bottom. I can see this design functionally becoming a round wheel at high speed.

@Axolotroll 5 месяцев назад

James just built a biblically accurate angel lol, Im almost expecting that wheel to start saying "be not afraid" randomly

@Abrikosmanden 5 месяцев назад

I really like that one! It's oddly beautiful.

@abualahadchowdhury2646 5 месяцев назад

A ride in a full size version of that monowheel will definitely give the best merry go round experience ever😁😅😅

@georgeau2523 5 месяцев назад

I have no idea what the application for this could be other than a toy but it looks cool, great work. If you could make the legs a compliant mechanism that is part of the printed wheel you might be able to remove 200 parts

@toordog1753 5 месяцев назад

Where the guide exists in the inner part of the wheel where the point of contact is on the ground, you could add more flexibility by adding an airbag style system to adjust the amount of stiffness or pressure the wheel can absorb on the ground

@fpvclub7256 5 месяцев назад

Love this thing.. I think the issue is the center of mass. If you could move the center of mass toward the direction you're going and probably bring it lower, I think it would climb and be a bit more stable..

@JinKee 5 месяцев назад

the wobbly dance would make a wonderful Star Wars astromech

@FranklyPeetoons 5 месяцев назад

This channel routinely awes me for some reason

@doyouknoedawae 5 месяцев назад

You should make a drivable version of this. Could be some innovation in that

@jamesbruton 5 месяцев назад

I think it might be quite high friction

@doyouknoedawae 5 месяцев назад

@@jamesbruton Oh wow didn't expect you to reply. Nice to meet you, and I want to say that I find you inspiring.♥️ We need more engineers or robotic builders like you 🫡

@gregzambo6693 5 месяцев назад

This could have use as a robot vehicle I think, running on roads and paths looks really good. Nice work!

@CharveL88 5 месяцев назад

Goes to show that the difference between a cool mechanical oddity and a practical mechanical device is 95% software. Things like the rotation could be fixed by damping the torque when in that mode for example. I love the mechanical ingenuity James puts on display, and it's great stuff! Many, many companies and inventors have come up with similar exercises, but the real hard part is precise algorithmic control, which is why we rarely see concepts like this in many practical applications. I think the next revolution in DIY prototyping ( the last one being able to print and iterate your own parts and plans with a 3D printer) is AI assistance in precision control in the presence of external variables, and the code to implement such algorithms in real time, all at the access of someone who would otherwise not know how to code.

@1kreature 5 месяцев назад

The leaning will look awesome you just need to use the same concepts as for cars. Add a bit of mixing from the leaning channel to both motors and steer by only using the leaning stick! It should look awesome and turn much better when you are not trying to do such a small turning circle.

@davydatwood3158 5 месяцев назад

It's worth remembering that most actual tanks can't turn on the spot - the lateral forces cause it to throw a track, so they're mechanically inhibited from even trying. I'd be very curious to see what happened if you took this and put a tall body on top of it, something about 5 foot or so. Kind of along the lines of the waitress droids in Star Wars.

@alexshepherd4469 5 месяцев назад

What do you mean tanks can't turn on the spot? 😂

@davydatwood3158 5 месяцев назад

@@alexshepherd4469 Not sure if you're being serious, but just in case you are: most of the tanks that have existed through the last century would have their tracks come off the wheels if they tried to neutral steer (ie, turn on the spot). So they couldn't. In fact, a lot of tanks didn't even have differential drive - they just braked the track on the side they were trying to turn towards. Now, a *modern* MBT can almost certainly do a neutral steer. But it's mechanically complicated and, if I am remembering The Cheiftain's lessons correctly, still strongly discouraged.

@brennenpatterson7974 5 месяцев назад

You could do some sort of bungie per leg on the wheels that way no matter the speed or orientation they’ll still fit into the gap rather than be gravity based. Love the design! Keep up the good work!

@mike-stpr 5 месяцев назад

Вероятно лучшим решением будет полукруглая направляющая -- на ровном покрытии пятно касания будет минимальным, в тоже время на неровном покрытии можно будет двигаться как на гусеницах, сглаживая неровности (не застревая в них). Аналогично для торможения подойдет ровная сторона, в то время как для быстрой езды по асфальту -- полукруглая. Как всегда восхитительно-шикарный ролик! Ваш труд и креатив поразителен! СПАСИБО!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :-)

@dylansedillo903 5 месяцев назад

I think if you were to make it ~25% bigger and add a large counterweight to the bottom it would be much better at climbing over obstacles. I wish I had the time and money, you give me so much inspiration to make projects like these

@spbiscotto19r 5 месяцев назад

Really cool! I would switch all the possible weight in a single small point on the bottom part, in order to force it staying stable!

@liamfay6748 5 месяцев назад

Cool as always!

@orclev 5 месяцев назад

It might be worth testing out using omni wheel style wheels on the feet. Basically mount rollers on the feet that are aligned perpendicular to wheel (maybe even make them out of flexible TPU). Doing that should still give it good grip when running straight, but would allow slippage when rotating. Another possibility would be Mecanum style wheels, although those are usually mounted in opposing pairs so I'm not sure they'd work out as well in this use case.

@MeleeTiger 5 месяцев назад

Would love to see a full size version of the second design, large enough to sit inside of.

@Dendrowen 5 месяцев назад

He looks so happy when he turns on the spot!

@UnlimitedScore 5 месяцев назад

Someone took the saying “you can’t reinvent the wheel” to heart…

@ImperatorMo 5 месяцев назад

still heckin slick mate, you're the modern da vinci. looking at what you build i can start to imagine the anakin type future garages.

@UbuntuBirdyMovies 5 месяцев назад

A monowheel with two wheels - you're a genius! 🤣 But man, I'm so impressed by your engineering skills! I would even say you're a genius!

@epicthief 5 месяцев назад

Such a cool concept 😊

@Francois_Dupont 5 месяцев назад

i think it is one of your best looking creation yet. it is like an insect.

@CollectiveSoftware 5 месяцев назад

This is a good one. It's adorable!

@GamerWannaB 5 месяцев назад

If you add a tread (similar to a tank) to both of the wheels it might give the friction needed to get out of ditches like you had by gripping the edge of the hole. this would also keep the flat bottom as the tread can be wrapped around and up to make it follow the bearings motion.

@GamerWannaB 5 месяцев назад

im also interested what whould happen if you added more weight to the "drivers seat" and see if that would help with the swivel problem where it tips to far and stops making contact.

@SVanHutten 5 месяцев назад

Great concept and build! I may suggest to link all the wheel feet by some sort of rubber tyre (or belt) in a way resembling a tank track (or a flat tyre) . That may reduce the lateral forces acting on the sliding legs when offroading. Or you may get rid of the sliders altogether and drive a belt around a "flat tyre" profile with rollers (by means of a pulley inside a loop on the top).

@XxMurvayxX 5 месяцев назад

Each finger should have spring tension inward so that when there’s a divot, the bottom stays flat.

@symply_ajay 5 месяцев назад

My thoughts exactly

@rommelfcc 5 месяцев назад

@James Bruton - rather than sliders, maybe using hinges would work better and much less friction... Then can just attach one servo to power it 4 x hinges 4 x bolts 2 x horizontal platforms Looks awesome 👍🎉

@andreuhlmann8112 5 месяцев назад

Great project!

@ebonwestbrook5580 5 месяцев назад

This design could be incorporated with hamster ball . Possibly moving outer shell plates

@mrwoodandmrtin 5 месяцев назад

Cool! Very interesting idea.

@Prophias 5 месяцев назад

for the tilting, you need some sort of actuator to move the center of gravity such that it stays low and in the middle, and doesnt swerve out with the tilt

@kurtnelle 5 месяцев назад

This is pertty epic. I think that if you use springs or a cam to pull the feet inwards it might help with getting stuck in a ditch.

@mezzanoon 4 месяца назад

Use angled bearings to get your pivoting idea to work, like the Timken ones often used for truck wheels. Tilting at that moment puts it out of the bearings plane.

@getstuk87 5 месяцев назад

as an avid offroader you might be on the cusp of something great. Keep at this one

@qazaq25 5 месяцев назад

It probably wouldn't be practical in any way but a mono wheel with a strong enough gyro to allow a driver to be on a seat mounted off the side of it would be kind of cool...

@christoffkruger 5 месяцев назад

When it gets stuck, the center rotation must extend something to the surface to reengage traction in such scenarios (But that will need some kind of geering to reverse the direction to get traction in the right direction)

@KarlLew 5 месяцев назад

When Tron met Segway. Tanks for the vid! ❤

@Huntersky2105 5 месяцев назад

Damn, this got recommended to me quick!

@SpermanHero 5 месяцев назад

Looks like a quirky Star Wars android, the front cog could be an eye of some sorts. Very cool project!

@Canoby 5 месяцев назад

Excellent proof of concept- I wonder if you had any ideas for improving performance in grass? And how well this works in something like sand or maybe mud?

@rottenmoonlesbian 5 месяцев назад

lot of ppl commenting on the fact that it has 2 wheels actually gave me an idea for how to make it 1 wheel, make the wheel much wider, and have 2 or 3 rows of feet on that 1 wheel, and then to tilt instead of tilting the sides have a way to tilt the frame inside so that when its tilted to the left the flat section on the bottom makes the left legs go down and the right legs go upand thus using the change in the center of gravity to turn like a normal monowheel but being more stable bc of the flat sections

@michaelbuckers 5 месяцев назад

I think the issue is that you effectively have completely rigid suspension. It can extend in the middle but it's no good since it can't retract at the edges, plus it adds no pressure there, just rides along. So as long as the surface is flat and slippy, it's fine. But it struggles to simply move at all otherwise.

@aaro_n 5 месяцев назад

I'd love another video about the controller and how you interface it with so many things.

@timvw01 5 месяцев назад

Very cool design

@bhyre1 5 месяцев назад

It looks like some sort of expansion joint fixed to the flat side of the hub, that applies pressure to the "feet" would help.

@piraterubberduck6056 5 месяцев назад

That looks like a lot of fun to play with. Moving the battery weight lower may help a little, or you could give it a wheelie bar.

@stewiex 5 месяцев назад

Hey James, a solution for your steering/traction issues is to print the pads with one side in PLA and the other side in TPU. If the TPU side points in, when you lean you will have more traction on the higher side of the monowheel and vice versa.

@krismanwaring402 5 месяцев назад

I think the spinning on the spot is so cute

@ghostAFsky 5 месяцев назад

It's kind of adorable.

@jamesbeemer2477 5 месяцев назад

Pitch the wheels each side at the top should get better stability for turning. good job it’s interesting watching physics in motion. Always learning something new from you

@hoppend 5 месяцев назад

I would like to see you put that extra servo to good use in extending an extra wheel at the back. This would greatly help with its offroad capability when needed!

@malcolmtisdale9222 5 месяцев назад

Could you react the moment of the motors on the body by having one bidirectional propeller sticking out the top? Would probably help and make this thing look even more nuts. Also to stop the legs jumping away from their track maybe add a guide for the bearings on the outside so the bearings are fully constrained to the path. Super cool! Never seen anything like this.

@crackedemerald4930 5 месяцев назад

This could make a fun tank design

@LEWTSPEC 5 месяцев назад

cam groove to keep the tracks in shape!

@gidi1899 5 месяцев назад

Impressive !!!!! really wish I could do what you do. suggestion: And A center Tail that wrap from strait into a circle (in circle state the cab is allowed to role) Use tail weight and elongation to control the down force (wheels's weight and traction are the up force) (maybe up-down is more spin cab-wheel). Was my suggestion useful?

@Pystro 5 месяцев назад

For overcoming rough terrain, I think you need both: The ability to swing the center of mass to the forward half of the wheel (that you get in the traditional design), AND the bottom staying flat (that you get with this pedrail design).

@eelcohoogendoorn8044 5 месяцев назад

I think the leaning would add value at speed with the right control. Ideally youd initiate a turn by leaning, and then as the lean angle ramps up, have it followed by a wheel velocity difference in such a manner to follow an arc with a centrifugal force that keeps equal weight on both wheels, given the lean angle. Just varying the lean angle and wheel speed difference independently from one another certainly isnt going to be ideal. I guess that doesnt solve the problem of zero speed turning though. Its always a bit of a hack with tracked vehicles but it turns out particularly jumpy for a tracked vehicles of these proportions apparently.

@IsaacNewtongue 5 месяцев назад

Very interesting concept! This is my first time seeing one of your videos and I quite enjoyed it. I wonder how this vehicle would handle with the tips of each leg having a ball on the end that can only rotate sideways? It might be too much work to bother, I just thought it might be interesting.

@NikolajLepka 3 месяца назад

Congratulations, you reinvented tank treads

@meateaw 5 месяцев назад

When you run both engines in opposite directions I suspect the sideways movement of the "feet" get them stuck in their channels. (IE they are pulling horizontally against the track, and get jammed stuck out and then lifts itself up)