No video :(

Medical Device Software Development Short Course

Подписаться 13 тыс.

Просмотров 26 тыс.

50% 1

This is a short course on medical device software development. The goal is to give you a basic understanding of some key concepts relating to the development of medical device software.
The short course is also a preview of the full online course: Introduction to Software for Medical Devices and IEC 62304 that will be available on: medicaldevicehq.com/iec62304
Don't miss checking out the online course Introduction to SaMD and IEC 82304-1:
medicaldevicehq.com/introduct...
Starting October 2023, the templates mentioned in the video are no longer available for free on Medical Device HQ. However, more comprehensive paid versions are now accessible via this link:
medicaldevicehq.com/templates/.
We offer premium templates for free to our newsletter subscribers. Instant access to some templates is granted upon subscription. Others will be distributed periodically as part of our newsletter email campaigns.
Chapters:
00:00 Introduction
00:24 About the instructor
01:10 Who is this course for?
01:18 Learning goals
01:53 Introduction to the IEC 62304 standard
02:55 Key elements of the IEC 62304 standard
04:09 The scope of the IEC 62304 standard
07:19 Scrum (Agile) vs IEC 62304
09:14 Medical software safety classification
10:20 Medical software development planning
11:08 Documenting software development planning
13:34 What is legacy software?
14:02 How to use the legacy clause
16:41 Configuration management in software development
17:33 Version control systems
20:01 Understanding probability of occurrence of harm
22:22 Additional help and resources

Опубликовано:

8 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@christiankaestner6511 3 года назад

Thank you to all viewers and likers of this video - much appreciated!! What would you like to know more about when working with medical device software? Please leave your suggestions below and remember to subscribe for upcoming videos!

@sundaraut Год назад

Very good and detailed Information

@mrugeshpatel5684 3 года назад

Hello i am a biomedical engineering student in india this video was helpful for me for my project work thank you 😊

@christiankaestner6511 3 года назад

That's great! Thank you for commenting!

@hannahm9259 3 года назад

Thank you very much sir!

@MedicalDeviceHQ 3 года назад

Most welcome!

@robertlongoria765 3 года назад

Thanks for the valuable content..

@MedicalDeviceHQ 3 года назад

My pleasure!

@mahesha7953 4 года назад

Please provide Quality Assurance Engineer roles and responsibilities in medical device

@christiankaestner6511 3 года назад

It depends. There is no formal definition for the role "Quality Assurance Engineer", therefore it is organisation dependent.

@ashbird7508 3 года назад

What are the challenges you will faceduring development of Software as a medical device? How ill you overcome the challenges?

@christiankaestner6511 3 года назад

I would say that the single biggest challenge is that you have to show external reviewers evidence of your hard and good work. For example, it does not suffice to say: "I have tested the software." You also have to document how you did the test and what the results were. Many "newbies" underestimate the workload and end up re-creating software documentation afterwards. Usually, this is both painful and inefficient. My recommendation is to prepare yourself by studying the requirements of IEC 62304 to understand the expectations when developing medical device software fully. I know I am biased, but may I recommend this course: medicaldevicehq.com/introduction-to-software-for-medical-devices-and-iec62304-online-course/

@bmistry5923 2 года назад

@MedicalDeviceHQ Does the battery powered medical device need to comply this standard for the MCU firmware (baremetal and not OS) or its applicable to PC based software with OS?

@christiankaestner6511 2 года назад

Yes, any software including firmware developed for the purpose of being embedded in a medical device should comply with the standard. You find the following in the scope of IEC 62304: "This standard applies to the development and maintenance of medical device software when software is itself a medical device or when software is an embedded or integral part of the final medical device."

@bmistry5923 2 года назад

@@christiankaestner6511 Thanks. Lets say a wearable ECG monitoring device which only collects ECG data and transfers it to a Mobile device(Phone/Tablet) where the Software displays the actual ECG waveform. In this case Mobile App must comply with 62304 however the Firmware of wearable device needs to be 62304 compliant?

@christiankaestner6511 2 года назад

@@bmistry5923 If the "wearable ECG monitoring device" is classified as a medical device, your firmware should be IEC 62304 compliant. IEC 62304 does not make a difference between software types.

@arnoudt Год назад

@@christiankaestner6511 Thanks for the video! Related to the original question, where in the MDR can I find the requirement to follow this standard? My understanding is that it is not the IEC 62304 standard that requires its use, but only the MDR (per article 8 or 9). Yet, the list of harmonised standards (art. 8) published by the European Commission (ec.europa.eu/docsroom/documents/50115) does not include IEC 62304. Where can I find the requirement to follow this standard?

@lukaspetrikas6320 4 месяца назад

But how do you get approved for IEC 62304. You have mentioned a few things that must be done regarding version control, documentation and etc. Do you have to provide the source code to whoever is issuing the certificates for them to analyze everything in order to confirm that you are fully compliant?