Meepo Board - board swap and DIY battery case 

I appreciate it!

thats a good idea, but the 3 separate pieces actually allow for flex in the board, which i want. And i dont ever plan to riding on wet roads again, last time i did that, my ass met the asphalt. lol

What about some liquid urethane it's flexy and will waterproof the joints in the battery case

Thank, ill look into this. i guess car window urethane will do just as well

Thanks!

That's awesome! 4 batteries would be crazy for distance.

Could you possibly send me the part list because im looking for 20+ miles range on my v1.5

i found a bunch of info about many types of kydex here www.norvaplastics.com/kydex-available.asp

theres a video in my playlist that shows you how. gimme a sec ill get you a link

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cHezTOtaWfY.html&index=5&list=PL83AICfVFJ5EAWi4TiOk4yc14r3z3HpOM only thing i didnt show was, how i charged the batteries together. i simply tied the two charging leads together into one plug. red to red and black to black

Thanks man, I appreciate it!

I haven't done any long range tests on 2 batteries, but i was able to get 11 miles on slow mode and 7.5 miles on fast mode on a single battery. with 2 batteries i was able to go 7.5miles and still had 40% left in the battery on fast mode. so my guess would be with 2 batteries, 20 miles in slow mode and 13 miles in fast mode. cant say what kinda mileage i could get with 3 batteries, but it definitely doesn't simply double up the mileage when doubling up the batteries

Doug Hnut Ok Thanks, also, from the inside of the battery where there are three sheets, di you put hot glue so that it would be somewhat waterproof? And lastly does youre battery indicator give you a percentage or does it say half battery quarter battery and if it is in pourcentage is it accurate?

+Blifix i didnt put any glue between the sheets, thinking of putting some really thin foam instead to allow some flex. The battery meter shows exact percentage or voltage with a press of a button. And yes it accurate. I have a video in my playlist about the battery meter. Check it out!

Thanks dude!, you're right, that intro video is getting old. time to make something new for next year.

bit.ly/2vCxXgG

because the plastic will go back to its original shape(flat sheet) when heated up, it needs to be pressed into shape as it cools.

Doug Hnut ok thanks

Calros P nope,. Just one charger. The two charging plugs from the batteries are tied togeather

very x 100 thank you !!