Megamorphix Parity 

Thank you I just solved my Megamorphix! I had PLL parity and kept trying the 4x4 axis cube PLL Alg

If you don't want to rememebnr the tedious and long PLL parity algorithms, you can easily avoid it. For that after you do all the centers, but last, you put your upper layer corners into their position and then look at your bottom layer. You need to permute the corners untill you have 1 at place and 3 out of place and only then you build the last center with switching center pieces from adjacent centers the way it matches up with adjacent centers AND you current corners orientation (or 180 rotation of it). Only after that you do egdes pairing and F2L. Thing is, all the algorithms for edges pairing and F2L don't change your bottom layer corners configuration and they remain at the same places, so when you get to OLL/PLL part, you are 100% PLL parity free. Obviously it also avoids the cases where your bottom center is rotated 90 degrees. It works, I assembled this probably more than 100 times already without using PLL parity alg even once.

owooo thank you so much

Cool!

Thank you

WOW Nice Video

Thank you for showing us how to solve this complex megamorphix. I watched your video again for a few more times, after failing to get the puzzle solved following the second or new algorithm. The trouble lies at the 2.46/2.47 m of the video; there is an extra flick, an R’ move after the r move. You have been using the lower case l and r to represent lL and rR, but here the R’ was not shown in the algorithm. I think my next attempts should work unless I fumble again as it is difficult to follow the algorithm exactly while solving it.

if you have a video with the corner parities leave your link in my comment. Thanks!

Thanks!

Bro I came here for the center pairity! Which is what is shown in the thumbnail, but where is the center pairity?!

I always thought the megamorphix is a megaminx but turns like a morphix

crazy bad cuber has a few tutorials on the mega and ultramorphix and he explains a way to avoid the corner parity entirely. idk if it would benefit you since you speedsolve but it seems to me like a very quick and easy step. he does although solve it with a basic beginner method so idk how exactly it would work with whichever method you use to solve centers on the morphix puzzles...

“There is actually no R' at all in the whole parity alg.” Yes, that is what I meant, there was no R' in the algorithm,but in the video at that point when after the r move was made, there is an R' flick.I think here what was needed was a "r" only move, but since the r was meant to be an r+R in the algorithm, a succeeding physical R' move was made to make up for that.The next time I get the same parity problem, I'll have another chance to verify this discrepancy. Thank you again all the same.

1:34 Peel the stickers off lol it’s too small

Cool!