Melitta brew unit Service by yourself. In home. 

My pleasure.)))

My pleasure. Hope, it will help.

@@OlegPC I have a Melitta Caffeo Barista and I need to replace the connector 047 the one on the side of the brew unit. It seems easy, however my brew unit doesn't fit back into its compartment and I see another video from you explaining to remove both side etc...but on some other video I see people resetting the machine so that you won't need to remove anything but for this you need to fool the sensor in order to initialize the coffee maker. My question is : where is the sensor ? Thanks in advance !

@@yakup_aksu The sensor (actually micro switch) - strongly reccomends dont try to "fool". Othen, after such tryings, brew ubit motor - will rotate ring (with 2 horns) on draineage valve, further then it normally should, and it brokes drainage valve or the case of brewing unit motor. This are very expensive "errors". So, dont do this.

@@OlegPC thank you bro !

@@yakup_aksu glad to help)))

Hello. I recommend replace seal on top piston (black rubber ring), replace orange seal in cylinder. What’s all. Other seals don’t need to be replaced. Parts number: 59920, 10219

@@OlegPC Great video! My machine is about 6 years old and started having some issues. One, milk frother is making bigger foam bubbles. Second, and most important, is not brewing coffee, sometimes. It grinds and pucks the coffee (very wet), but liquid coffee does not come out from the dispenser. Then, I need to run a rinse, take out the brew unit, rinse it … and will start working again. What can be the problem and how can I fix it without having to send it to a technician? Thanks!!!!

@@Glogluxx Hello. You can fix it by yourself - change seals in brew unit ( its easily accessible), change drainage valve ( common replaceable part of melitta machine), and change top microswitch of brew unit motor assembly (its placed on level with top piston of brew unit)

@@OlegPC uffff I wish I knew what you are talking about 🤪…

@@Glogluxx Try to “goggle” that parts - all available worldwide.

Hello. If water (but not coffee) goes into drip tray - water inlet spout of brew unit is, as often as drainage valve, the reason of this malfunction. It can have a little catch or broke its gasket. You can test it by trying to broke by hand (push down for instance). Not hard but with middle push power. If it’s in good condition - chances they you broke it very little.

Hello. Try Juraprofi.de - they have good quality seals for reasonable prices.

Может быть любая неисправность - собсветнно есть у меня видео про «мелитта сливает воду в поддон» - рекомендую посмотреть - там возможные причины описаны.

@@OlegPC Нашёл (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dfQJzSnx0mI.html) спасибо!

@@dma_k Пожалуйста))) Обращайтесь

Got a video on my channel about this problem. Just use search.