Over the life of your Mercedes, the front driver's side door will get opened and closed more than the other doors, trunk and hood combined. It can take a tremendous amount of abuse and sooner or later something will fail, and if it is not something on the door panel it will be one of the components behind it. If you need to service your doors' mechanicals or want to freshen up the appearance with new trim you will need to remove the door panel.
This article will show you how to remove your front door panels. It is not a difficult job, but door panels can be very expensive so take your time and double check things. Also, if you are going to be working on your own car, it is a good idea to purchase a set of trim removal tools. They are a set of hard yet flexible plastic tools of different shapes and sizes that are used in removing trim pieces. They work much better than a flathead screwdriver. There is nothing worse than ruining a "do-it-yourself" project by scratching up your car or damaging expensive interior pieces. Pelican sells a full line of these tool sets for under $30.
Read the Full Article: www.pelicanparts.com/techarti...
Time: 2 hours
Tab: $0
Tools: Trim removal tool :www.pelicanparts.com/Mercedes..., T30 Torx driver :www.pelicanparts.com/Mercedes...
Parts Required: Clips if needed :www.pelicanparts.com/techarti...
Hot Tip: Pry as close to the clips as possible
Performance Gain: Access to other components
Complementary Modification: Detail the interior
Applicable Models:
Mercedes-Benz C250 (2012-14)
Mercedes-Benz C300 (2008-14)
Mercedes-Benz C350 (2008-14) :www.pelicanparts.com/catalog/...
17 сен 2020
