Mercedes C 180 CDI S204 2014 Thermostat replacement (204.200) 651913

Подписаться 2,7 тыс.

Просмотров 6 тыс.

50% 1

Hose part number 2045011582
Thermostat number Meyle 282280004 (True to OE)
You will need a hose clamp tool, extended.
The rest is quite easy.
Top off with Kroon Coolant SP12++ / SP 11 / SP 12 EVO
I will be replacing the thermostat and coolant hose on this Mercedes, because it was leaking at the hose but the customer also wanted the entire thermostat replaced, it's not a big job, you could do it at home. Any questions are welcome.
Contact:
E-mail: futyi95@gmail.com

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@ranjah007 8 месяцев назад

Just came across your video. Love the format and how you do your work. Keep it up

@C-L66 6 месяцев назад

Just done mine following the vid, I did not need to remove the belt and those clips are a pain without the correct tool, changed one of them out to a normal type otherwise I would be still trying to complete the job😂 thanks

@MechaNick_ 6 месяцев назад

It is indeed not needed to remove the belt.

@N.E.ACMG47 2 месяца назад

Many Thanks Nicholas !!

@twana1000 9 месяцев назад

Good luck to you

@louisamotsepe2828 3 месяца назад

Grea55 job well done

@valeriustana1114 3 месяца назад

did you need to use tester to refill? or just refill with coolant? thx

@MechaNick_ 3 месяца назад

Just refill.

@valeriustana1114 3 месяца назад

@@MechaNick_ thx a lot for your kind reply!

@rubenps31998 4 месяца назад

is mandatory to change that hose? or not 100% neccesary

@MechaNick_ 3 месяца назад

I replaced it because it started leaking around the rim.

@AutoMorons Месяц назад

Nice work! I have a question, there are 2 sensor on the thermostat housing, one is coolant temperature sensor but what is the name of the other one? My coolant is leaking from there and i can’t find that sensor’s name nor where ti but it.

@MechaNick_ Месяц назад

@@AutoMorons i believe its to check if the thermostat is open. Not sure. After replacing the housing the car started leaking from there again. There was too much coolant pressure and ended up changing the headgasket.

@AutoMorons Месяц назад

@@MechaNick_ do you think i can replace it ? Or do i have to change the whole thermostat?

@MechaNick_ Месяц назад

@@AutoMorons if you can get it with a new seal ring

@AutoMorons Месяц назад

@@MechaNick_ okay, thank you for the help!