Step by step: How to diagnose low coolant level messages; fix and get rid of these error messages. affiliate link for this part: amzn.to/2rBaDzx (cheaper than the dealership)
Hi there I guess the young man at Mercedes left the lid off and they said there was a bubble They did fix it because of human era and the message went away So grateful for your channel You make it all look so simple which I know it isn’t. Thank you, thank you for being here for all of us
Very good informative video. Thanks for sharing. Helped to cover the thermostat part. i have 2010 ML550, ans got P0128 code, just wanted to know if i should check coolant sensor before going for coolant thermostat?/where exactly this sensor is located? If i can have a diagram or picture to locate it so that i can replace it. Appreciate your help!"
Very helpful! I'm planning to use a similar reservoir in a project and I was wondering how to turn a custom light on when the reservoir gets too low. Since I need to turn a light on when resistance becomes infinite, I'm thinking of using a relay or MOSFET that is normally on, and using the level sensor as the switch line. So when there is coolant, it will turn the light off. Coolant drops too low, relay returns to normal state of on, and turns on the light. My only concern is passing current through the coolant. As long as I put the relay on the positive line to the sensor leads, I should be fine and not cause electrolysis, right? Thanks for any thoughts!
My 2001 CLK 320 has no pressure in the upper and lower radiator hose but it does not run hot can you tell me some suggestions on how to fix it or what is wrong
Hello from Germany. Cool Videos and very good explained. Is this Switch working the Opposit way AS the one from Mercedes W211??? The W211 one is in closed Position, when the Reservoir is empty and when it is full, the Switch is Open and the current runs trough the resistor. The ML - SWITCH Looks Like to be closed when the Reservoir is full and Open when it is empty. Am i right?!? Thank you and sorry for my english.
I have a 2012 S550 W221 and have replaced the resiover tank due to coolant leaks. Now I have the tube on top of the manifold with a T broken and infront of the engine as welll. Very brittle and believe they are going to intercoolers. Im not a professional mechanic and can provide any needed information or pictures. Can I get help to buy the right parts and best way to replace ? Happy to pay for your time. What is the best way to communicate ? I couldn't find a button on you tube to send a PM
Thanks Keith! I had this issue for several months now. Question: I have an 2007 and a 2009 GL450 would parts from the 07 fit on my 09 like hood/rear bumper ect... thanks
Question please S430 2000 Mercedes Benz everything lights up turn key want start liked at option on you tube not it stating a starter but to hard to out on myself do you text email NEED YOUR help everything I've fixed cane from your videos
@@iRepairAutos ML320, in my case the coolant was just below the sensor, didn't realise It had to be quite that full, but fill it I did, and the warning vanished
How much oil? It means that your oil cooler/coolant cooler (same unit) has an internal leak. Most likely the gasket is gone. I have a video on this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-o1CPtsoGHFk.html
@@iRepairAutos a lot but it wasn't the gasket. The mechanic told me it was destroyed the coolant and the pipes but he fixed it and now no oil leak in there. Thanks a lot for the answer. Greetings from Greece