Mercedes Driveshaft Flex Disc Replacement | No more clunky shifts!

Подписаться 26 тыс.

Просмотров 32 тыс.

50% 1

Hear a loud CLUNK every time you shift your beloved Mercedes into reverse or drive? Your Driveshaft Flex Disc could be going bad and needs to be replaced! Very common issue on ALL Mercedes models. What happens is the rubber begins to dry out and crack causing all kinds of vibration like you see in the beginning of the video. This part is made to reduce the vibration between the driveshaft and the transmission.
In today's video I'll show you how to replace the flex disc quick and effectively. The car used in the video is a 2000 Mercedes C230 Kompressor, but this is same procedure for any Mercedes model with this part. (C / E / S-Class CLK SLK W210 & more)
Here are a few options for parts needed along with some tools used in the video:
- Mercedes Flex Disc Replacement - amzn.to/3CMBWJK
- Transmission Mount for Mercedes Benz C230 C300 CL CLK E SLK W202 W203 W210 W140 W220 R170 C209 - amzn.to/3JvDiw9
- Driveshaft Flex Disc Joint Kit 2104101215 For Benz C / E / S-Class CLK SLK W210 - ebay.us/Xui7Z5
- Mercedes Benz Genuine Transmission Mount C class W202 W203 OE 2122400318 - ebay.us/5ysbmj
- Milwaukee 3/8ths Impact - amzn.to/3qZX7FP
- Milwaukee 3/8ths Ratchet - amzn.to/3pgiTob
- Starter Mechanic Kit - amzn.to/46hRrHe
- X-Core Sockets - amzn.to/3r257WI
- X-core extensions - amzn.to/3pju3bL
Need some automotive assistance beyond this video? I've got you covered with eManual Repair Manuals for Any Vehicle. Trust me, it's the secret weapon in every DIY'ers arsenal. Check out the link below and let the repair magic begin - shrsl.com/43l4o
And a special shout-out to all you wonderful supporters out there. If you happen to click any of my custom links and buy a product, I'll do a little happy dance and earn a small commission, all without costing you a penny extra. Now that's what I call a win-win!
Thank you for watching!
Venmo - @ItsMechaniCole
#Mercedes #W202

Авто/Мото

Опубликовано:

24 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 77

@Mechani_Cole Год назад

Here are a few options for parts needed along with some tools used in the video: - Mercedes Flex Disc Replacement - amzn.to/3CMBWJK - Transmission Mount for Mercedes Benz C230 C300 CL CLK E SLK W202 W203 W210 W140 W220 R170 C209 - amzn.to/3JvDiw9 - Driveshaft Flex Disc Joint Kit 2104101215 For Benz C / E / S-Class CLK SLK W210 - ebay.us/Xui7Z5 - Mercedes Benz Genuine Transmission Mount C class W202 W203 OE 2122400318 - ebay.us/5ysbmj - Milwaukee 3/8ths Impact - amzn.to/3qZX7FP - Milwaukee 3/8ths Ratchet - amzn.to/3pgiTob - Starter Mechanic Kit - amzn.to/46hRrHe - X-Core Sockets - amzn.to/3r257WI - X-core extensions - amzn.to/3pju3bL Need some automotive assistance beyond this video? I've got you covered with eManual Repair Manuals for Any Vehicle. Trust me, it's the secret weapon in every DIY'ers arsenal. Check out the link below and let the repair magic begin - shrsl.com/43l4o

@aironmendes5973 Год назад

how cool me Already Ia speak what these tool your Are much good principally at Screwdriver gives Milwaukee.

@aironmendes5973 Год назад

Here in Brazil no sells gives Milwaukee sells others brands as The American Dewalt have an drilling machine The drums her much good also but ever quiz an Milwaukee who You know one day I buy an of that Thanks fur link in purchase. 😉🤝👍

@chadg6874 Год назад

I was looking for a video like this a couple months before you made it! All the other ones show the part and talk about it but dont actually show you how to do it. Lofe saver!

@Mechani_Cole Год назад

Glad it was helpful🤙🏼

@Bethkimphotos Месяц назад

thank you for this very clear and bright to the point

@aironmendes5973 Год назад

Another outstanding video! 🎉

@sonidoritmoyclase 5 месяцев назад

Really good video thanks gonna try and do that soon

@angturil 4 месяца назад

don't forget to mark the drive shaft before completely unscrewing and removing the discs, it is balanced and you don't want to lose that!

@user-iw6dr9rb3b 4 месяца назад

You have to mark bolts or position

@AlexanderRau 10 месяцев назад

well made brother, thanks for sharing!!

@Mechani_Cole 10 месяцев назад

Thanks for watching and commenting 🫡

@malcolmmcfarlandsr.3591 8 месяцев назад

Great video thanks!

@Mechani_Cole 8 месяцев назад

Thanks for the comment🤙🏼

@bigfather1279 11 месяцев назад

nice video clear and well filmed also . did u remplace the other flector on the back?

@Mechani_Cole 11 месяцев назад

Thank you, and no I didn't. The one in the back didn't have any cracks and looked really good still

@justice4romania96 11 месяцев назад

Hey! Why was traces of oil on the trim over the flex disc? I have the same problem, yet the seal is dry. Thank you!

@Mechani_Cole 11 месяцев назад

Good question. Maybe Grease was used during install from factory and spins out? Not sure, didn't seem like an issue on mine

@DrOdTtg 6 месяцев назад

I have a ml350 05 and when I put it in P and D n R I hear a clunk and when I drive I hear it in the shifts too I think it’s the support bearing could it be this ?

@Mechani_Cole 6 месяцев назад

You can usually visually inspect these and see the wear and tear. Lift it up, put it in neutral and grab the drive shaft. Turn it back and forth and see where the movement or clunking is coming from

@agushendro4743 5 месяцев назад

Very useful video. Btw newbie question, did you put the car shift in P or N when doing this? Try to find info in google so far no luck.

@Mechani_Cole 5 месяцев назад

Good question! Neutral is what I did. After the car was in the air and secure of course.

@talklacey664 Месяц назад

Is there a front and back side to the flex disc or does it not matter which way it goes ?

@Mechani_Cole Месяц назад

People have been saying there is a front and back, but both sides looked exactly the same to me

@MN_ALGORITHMS 8 месяцев назад

Do you need to replace the driveshaft end bushing too?

@Mechani_Cole 8 месяцев назад

If yours is cracked and worn yes

@MN_ALGORITHMS 8 месяцев назад

@@Mechani_Cole thank you!!!

@Sanneti2012 5 месяцев назад

Besides the clunking, is it possible that this bad flex joints cause intermittent vibrations thru the whole body?

@Mechani_Cole 5 месяцев назад

Yes, but repalce the trans mount at the same time. Will make a huge difference

@Sanneti2012 5 месяцев назад

@@Mechani_Cole i did replaced the mount already (ML350 ‘13 4matic) I noticed some change but there’s still some vibration. It barely has 100k miles. Thanks

@Mechani_Cole 5 месяцев назад

@Sanneti2012 have you replaced the engine mounts? That should make a huge difference. The disc doesn't need to be replaced unless you see it's cracked or worn

@Sanneti2012 5 месяцев назад

@@Mechani_Cole I haven’t but I noticed the engine being very stable, no jerking when accelerating. I guess I can try.

@tonymyersnz 6 месяцев назад

Awesome video, thanks! Would this issue also cause a small/barely noticeable vibration? Mines definitely cracked and needs replacing

@Mechani_Cole 6 месяцев назад

Thank you and yes! I'd suggest doing transmission mount as well since it has to be removed

@tonymyersnz 6 месяцев назад

@@Mechani_Colethanks for the reply, do you happen to have a part number for that? Much appreciated.

@tonymyersnz 6 месяцев назад

And on another note, I am sourcing this part atm, I believe it is 0004110200, would this be okay for a w219 CLS350 2006? Again, thank you!

@Mechani_Cole 6 месяцев назад

@tonymyersnz both should be listed in the description

@tonymyersnz 6 месяцев назад

@@Mechani_Cole apologies, I am wanting to confirm if this will fit a w219/cls350 as I could not see it listed under the description/ebay listing

@ahd5764 5 месяцев назад

Can you help me with a question? I have a cls w218 and at high speed if I take my foot of the accelerator quickly, it gives a kick, sometimes stronger, sometimes less strong. It seems to be heard from behind, and I think it is from the cardan, driveshaft flex disc, or something. What do you think?( the gearbox shifts very well, but i think I need to change the gearbox oil. In that condition, that could be a factor?)

@Mechani_Cole 5 месяцев назад

I would change the gearbox oil first. I'd also replace the trans mount if I was you and see if there is a big difference

@ahd5764 5 месяцев назад

Thank you!

@kendalgee5808 5 месяцев назад

I would go with OEM only. I had a nightmare of a time using aftermarket febi bilsteen front sway bar busings. They squeeked like crazy. When I went back to new OEM bushings = back to normal. Cheap out on the part, you will pay later when you have to do it 2x with an OEM part.

@Mechani_Cole 5 месяцев назад

I disagree. I've been using this Febi replacement for about a year with now issues.

@kendalgee5808 5 месяцев назад

Febi Bilsteen replacement what? Flex disc or sway bar bushings?@@Mechani_Cole

@Mechani_Cole 5 месяцев назад

This video is about the flex disc. That's what Im referring to. I don't have a video on the Sway bar bushings

@kendalgee5808 5 месяцев назад

Good to hear the Febi Flex discs work well. From my experience the Febi sway bar bushings squeek really bad even when u grease them. @@Mechani_Cole

@Mechani_Cole 5 месяцев назад

@kendalgee5808 good to know as well🤙🏼

@boigoe 13 дней назад

How many flex discs do these cars have. I was told 2 but people only changing 1...am I right

@Mechani_Cole 13 дней назад

Yes. There is 2. Usually just the first one goes bad, so that's why it's replaced

@boigoe 13 дней назад

@Mechani_Cole ok thank u for reply... is it worth doin both of them? Is the other side same job time or harder to do..thanks

@Mechani_Cole 13 дней назад

@boigoe I just did the one that looked worn. If they both look bad, replace both. If one looks good, it's probably fine

@mienqchau Месяц назад

I assume all wheels has to be off the ground?

@Mechani_Cole Месяц назад

It's easier that way. Can maybe do it with just the rear lifted. But I'd recommend all 4 corners

@mienqchau Месяц назад

@@Mechani_Cole good looks my guy! just have to ask!

@aprilfisher2928 Месяц назад

Can the drive shaft be crack also

@Mechani_Cole Месяц назад

Possible I guess. But very unlikely

@aprilfisher2928 Месяц назад

Wow this guy said my crack a little

@aprilfisher2928 Месяц назад

Wish you can fix mines 😊

@Mechani_Cole Месяц назад

It can happen. I'm located in Vegas if you're anywhere close

@aprilfisher2928 Месяц назад

3000 miles away

@bahissafg 10 месяцев назад

Watching this I don't even have a bicycle 🚲 🪖

@Mechani_Cole 10 месяцев назад

It's never to early to learn🫡

@bahissafg 10 месяцев назад

@@Mechani_Cole thanks I agree we appreciate your work you earned a sub and like I learned already alot. 🙏

@luisenriquechavezdiaz3071 5 месяцев назад

Bro just ordered the part from Amazon and it didn't fit xddd

@Mechani_Cole 5 месяцев назад

Did you replace the mount as well? Could asap be the rear one

@luisenriquechavezdiaz3071 5 месяцев назад

@@Mechani_Cole i Will order from FCP euro the one on the description didn't fit my Mercedes w202 2000 c230 Kompressor since is a different part number, and yep I will order a new mount for the transmission

@boninotate1305 10 месяцев назад

You forgot to mark the drive shaft

@Mechani_Cole 10 месяцев назад

For what exactly?

@angturil 4 месяца назад

@@Mechani_Cole it is balanced. If you don't put it back in place the exact way it was screwed originally you will lose that balance. You MUST mark it at any cost or your brand new discs will wear out much faster than before, not mentioning the vibrations that it will cause. Mercedes WIS document AR41.10-P-0050-03SX. This is Mandatory on such operation

@Mechani_Cole 4 месяца назад

Thanks for sharing! So far so good about 6k miles later, will update here if I have any issues

@joshuaculley9695 11 месяцев назад

I only hear the clunking when I turn and am accelerating. It feels like the moon is messed up like twisting a chicken bone kinda crunch. Is that the flex disk or the universal joint?

@Mechani_Cole 11 месяцев назад

Hard to say for sure without a visual inspection. Could be either, or bad tie rods/control arms if it sounds like it's coming from a wheel

@joshuaculley9695 11 месяцев назад

It’s not coming from the suspension. The sound is coming from the center console part down from the hear shift knob where the tray is. I’ve got a 74 450SL Mercedes. I guess a better explanation would be when the car is accelerating when I’m turning and I can hear it and feel it as if the u oversaw joint was twisting as if you were twisting a chicken wing apart in a circular motion so when I let off the pedal the grinding crunching clunking noise stops and I slow down some to not engage it too much and damage it further whatever it is. I believe it’s the driveshaft just below that part. Wish I could post pictures. Also. Not sure why I was saying when I typed moon..

@Mechani_Cole 11 месяцев назад

@joshuaculley9695 I see, that's a way older model for sure. I think you got it pretty close. I would assume drive shaft, or carrier bearing