Mercedes w203 C class Windshield Wiper Motor / Test and Replacement

Подписаться 56 тыс.

Просмотров 93 тыс.

50% 1

Here is a link to a playlist with all the videos I made about this car :
• Mercedes w203 C class ...
Before replacing the windshield wiper motor, it is worth trying to test other components of this system. The fuse , relay and the wires might go bad before the motor itself will go bad . This procedure might be similar with many Mercedes from the year 1998 to 2006 - w203 w210
Disclaimer :
This youtube channel :"doit_vehicles " can not guarantee that this information suits to your car . "doit_vehicles " assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk .

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@werunit2409 Год назад

Very detailed and organised. A lot of useful information that can be applied to automotive mechanics in general. Great job!

@champion11ish 4 года назад

My bonnet switch was clogged with debris - now wipers working fine - thanks for the help.

@scottflyey 2 года назад

This was a really great video these how to car Guy videos are better than almost anybody. My motor worked except that it was spinning but not turning the shaft. It turned out that the Teflon gear inside the motor had gotten stripped. I found one on eBay for $20. I replaced the gear inside the motor and everything works now thanks to this video! Except for the Minor details omitted this video is better than almost anyone else!

@percevalle1 4 года назад

Very precise and professional tutorial. Thank You!

@adrianhume Год назад

Excellent instructions This guys youtube account should be printed in all Mercedes Hand Books!!!!

@nandooly4946 4 года назад

Great Bro!! You helped me. Thanks. In my case, all did works before I changed the hood, after few day I want use windscreen wiper but don't works nothing, the hood was closed, I checked rele and fuse they were work, motor too. I been begin to crazy. At finally, watching your video in the part that you use screwdriver to simulate the hood close. I had the illumination, so I prove to do the same thing and everything come back to work. The closures in the hood don't doing good contact so it seemed how the hood was open so nothing it works

@doit_vehicles 4 года назад

I am glad I inspire you :)

@offlimits4622 9 месяцев назад

Many thanks for helping troubleshooting this issue with the great content

@dixie265 3 года назад

I didnt know about the bonnet switch, saved me..thought the wipers were bad thanks

@doit_vehicles 3 года назад

You're welcome

@gunterdomroese7690 2 месяца назад

Many thanks for helping

@JoaoEspancaBacelar Год назад

Great perfect lesson! Thanks a lot!

@bernini9 3 года назад

Bravo it's an perfect explanation thank you

@icarojapan Год назад

Just came home to an undercharged battery, recharged it and after getting car started found wipers don't work after turning switch. Completely dead. Going to trouble shoot with your guide. Great work. Thanks. By the way, my window washer is not working from before, anyway to troubleshoot it? Apparently there's no fuse??

@hamitinan6422 2 года назад

Selam friend When I press the wiper arm, it sprays water and wipes, but it does not work in 1,2,3, positions. I removed the cable of the rain sensor, the result is still the same. Fuses and relays are OK. I changed my arm. Could it be from the engine? How many volts should the wire have to change the speed?

@scottflyey 2 года назад

This video was really good except some little details were missed. There are some washers and rubber bushing and rubber dams around the edges that were not covered at all. It wouldn't have lengthened the video by more than one minute to have included those. I found it I needed to add a lock washer to the motor shaft where the 13 mm nut holds it to the wiper assembly. I am still unsure where the big rubber washer went but it doesn't seem to be that important.

@0planundlos423 4 года назад

Very good information, make it like u, and works! thx!!!

@doit_vehicles 4 года назад

Nice

@pakswedishfamily282 Год назад

I like your English & Video is great too😊

@doit_vehicles Год назад

Thank you! 😃

@wesleyaltman8731 2 года назад

Thanks for the explanation! I recognize the sound that I experience after 3:17. My question, where does the sound come from? Then I hopefully can resolve the issue!

@prettyboyexclusive6614 2 года назад

Can you do a video on the fuel cap actuator won’t lock how to replace Mercedes c240 2005 4matic

@sparkdg 2 года назад

Thanks for the help.

@cryodaniel1122 Год назад

awssome ....thx so much!

@alexnova85 3 года назад

Thank you so much for your video guide.

@doit_vehicles 3 года назад

Glad it was helpful!

@soringoian6364 2 года назад

Great video. Too bad my front is working but the rear doesn't :) I suppose it should be similar in terms of testing the relay and the motor? I did checked the fuses. Thank you!

@DukeCarly Год назад

Great video very informative!!

@Realtystewards 3 года назад

When I turn the wipers off they stop in the upright position.

@sheldrickmurphy2927 5 лет назад

good informative information thanks

@blass5506 Год назад

I made all the test and the motor works but when I test pin 1 and pin 2 which is the switch I did not get the 12 volts . I suspect my problem is the multi switch . Please give any other suggestions thank you !

@onurbasoda4826 7 месяцев назад

Hello, what exactly is the problem? The wipers in my car stay in the middle when I turn them off. Is the problem the fuse or the wiper motor?

@rageastefi 3 года назад

Thank you so much for this video!! Very helpful!!

@doit_vehicles 3 года назад

You're welcome

@slavonac5256 2 года назад

@@doit_vehicles On my w203 left arm work, right not work. Can you tell me what is the problem? Thanks

@JRC318 3 года назад

Thanks for the video, currently stuck checking the wiper relay (Q) not getting a response. Unsure if motor faulty or multimeter not sufficient! Any suggestions?

@lilflipboi1tropa262 2 года назад

If applied 12v on the brown and green connector and wipers doesnt move does that mean the wiper motor is bad?

@doit_vehicles 2 года назад

if the motor doesn't seem like it wants to spin , yes

@tesfagaberyonas 4 года назад

Hi i did everythig u did and the motor works when i jump IT and i change the swich relay but stil not working hjelp pls

@doit_vehicles 4 года назад

Does the switch relay get power ?

@tesfagaberyonas 4 года назад

doit_vehicles hi IT works now thank u very much

@tesfagaberyonas 4 года назад

Hi it was fues and it works now thank u very much but My esp is on sadenly with it and tail lights er behaiv wierd is IT the break swich or ground problem thank u again for your time

@profesorahm5518 5 лет назад

Very, very good tutorial ¡Bravo!

@doit_vehicles 5 лет назад

I am glad that you liked it

@profesorahm5518 5 лет назад

@@doit_vehicles Very proffesional, i am looking for some information to try to resolve my problem with the windshield wiper that star runnig when i push the combinated switch only to turn signal switch and then dont stop, stays running. To turn it off y must to stop the car, shutdown the engine, go out the vehicle and push down, around 1cmm, the wisper, then i can start again and the wispers dont move, till next turn signal light!!! ¿Any idea?

@mathewoyite6661 4 года назад

Well presented

@mikemays9106 2 года назад

Does each side have a different motor? Watching your video it appears one motor operates both. In my case only the passenger side motor is not working. Aldo, what is the “bonnet” that some people mentioned?

@doit_vehicles 2 года назад

It's only one motor . Bonnet / under the hood 🤔