Metal Buildings are NOT cheap! 

Straight to the point. No messing around! Thank you.

Built a 24x30 pole barn shop, steel roof trusses at 10’oc. 6x6 posts with 2x4 infill framing. All in at $18,000. Includes 2 - 10x8 overhead doors R10 insulated, 1 3’ door, concrete slab, whole building has 7/16 osb on roof and walls. Also has 12’ side walls, 4/12 pitch roof. In addition, it has a 10’x24’ loft in the rear that is 8’ aff. I did all the work myself except grading the pad and concrete finishing. I did form and prep for the slab, finisher placed and finished concrete. Not bad for $25 a square foot.

Thanks For Giving The Cost Off The Top 👍🏿👌🏿

Guys will see this and say “hell yeah”

There are couple of different effective ways to insulate. A friend of mine used panels with an airspace between the panels and the exterior. This added R-Value. When you walk inside you would never know you were in a metal bldg. He finished it and it is unreal.

I'm in New England and needed a frost wall so my foundation was $15,600 and that incudes site work and prepped for a 2post car lift in 1 bay. It's a 26'x30 metal building like yours with a 10'x20' lean fully insulated $21,400. I needed it engineered for higher wind and snow load per local building code so engineer plan cost $1550. My driveway is millings/hard pack and came out to $5000.

That's a house for way under 100k

I think your dad (SECRETLY) built that for YOU. ✔️ Great Video too. .

I want this shop

Pretty cool. I would love to do something like this

Thanks for the video and cost break down plus the other build vid. I'm just now looking at metal buildings. So far I understand there's tubular steel or red iron (and the latter can be welded on site or bolted together from a kit.) Questions, if you can spare the time, please? 1. Assuming you've built on a slab the way you have, what is the lifespan of this tubular steel construction, please? 2. And btw, did the concrete cost and any site work include labor? 3. Plus, were there other details we need to be sure and look at when comparing bids for the metal? Colored screw heads, for instance... What else in the world do we need to watch for that might be included as default in some companies but omitted and marked up in others? [ The reason I ask is that my friend just showed me a quote and had not noticed that there was a note at the bottom saying the purchaser would be responsible for renting or providing a LIFT! That is heavy equipment and should not be required for this type building, surely? ( I was told not until you get taller, 14ft walls, on tubular steel.) Your 10ft sidewall building was put up by a 3man crew and ladders! Plus it should be included in the installation which was supposed to be part of the quote! ] Thank you for the videos! [ And the dog petting video was a lovely break. Kudo's. :) ]

Did you build this or does the 15k include labor? great video!

I’m also located in Georgia. If you do not mind, what company did you end up using for your building?

nice ill take 2 for that price installed

What is the minimum interior height. I know you mentioned a lift and from what I read you need 12 ft clearance to lift a vehicle to full height. I'm currently preparing for a 30x40 with 3 8x10 doors and went with 11 ft walls. Is this overkill?

What is the height of the side wall?

There will came a time when you say that your budget was worth every penny. I just watched a RU-vidr cry real tears after spending (his claim) $250,000 for a tube frame tent storage building that collapsed under the weight of a allegedly freak snow storm. It looked as if someone could have been seriously hurt the moment it collapsed, but thankfully didn't.. Even after you insulate this beautiful build and have a 800 amp 480vac three phase electrical service and install HVAC you will still not have spent $250K.

How bad is the condensation right now with no insulation?

I would put an RV inside it and move in. LOL

Pole barns 🤟

Lol we all know 6 inches is more than enough! 😂

You forgot to add the air you breathe 😂

Woah a new Multishop Matt video! 🤯🤝

I disagree, I got my 20x25 10ft walls and an 8ft lean too all assembled in one day for $6500 I also paid 1800 for the concrete slab, and 2000 for closed cell spray foam and a few hundred more for OSB walls and conduit and boxes etc. I have about $11,500 in the whole thing.

it seems like this is all you mistakes. Those metal building guys come in and put up a bulding. You do the rest. Also a black building absorbs heat.