Metal Detecting in stubble can be a real challenge 

Great job, thanks for the feedback x

Good luck 👍

@@vrr2300 Thank you for watching

Thanks David

Cheers Paul, stubble is no fun, but as you say this new government scheme is it called the AB6?. They have to leave the stubble for 12 months.

Good luck, remember to raise the discrimination to a level you are happy with.

Thanks for your thoughts, just remember that lower discrimination may be a little wild on an Iron rich site 👍

Agreed. The XY screen on the D1 was spot on. Remember the high frequency coils of the D1 were only single frequency. You had to choose one. In my experience with the D1, getting close to 40 kHz had a noticeable effect on the accuracy of the XY screen, VID and target tone. It made undesirable targets hit like coins. I pulled a lot of shotgun pellets that sounded and looked great on the XY screen at 40 kHz, and items like buckles made the XY screen act wonky. The takeaway here is higher frequency on the D1 finds more stuff, the trade off is less confidence in the target. The D2 is simultaneous multifrequency. Set your XY screen to 3x zoom. Set your maximum frequency 35.32 kHz. This will bring the D1 XY Screen accuracy to the D2 XY screen. If you still don't have the accuracy of the D1 XY on the D2, lower the maximum frequency to 28.57 kHz.

@@leesmith2798 Excellent feedback - Cheers 😉 I will definitley try your suggested max frequencies on D2 👍

@poulstilling5583 Best of luck 👍

Can't wait Dave

Good to hear Steve, give it a blast.

Not yet Steve

Thank you my friend 🤝

I think there has been a few prototypes thrown out there over the years Neil. Personally I think an Elliptical coil tuned 90 degrees may work

Hi Dan Great idea, thanks for your thoughts and congrats on the Yellow stuff

Cheers DDS 🤝👍

Thanks Amanda, and good luck with the settings.

Great info thanks Dave

Thanks

Thanks for watching, good luck with the Chanel growth.

Good luck Keith, where in England are you staying?

@@The-skillschool Norwich area

@@The-skillschool funny thing I met you 10 years ago when we both were staying at a hotel I think was called The Stag. you programmed the "hot" program into my Deus before it was included and also gave me a beta charging clip with larger pins. well both worked great. my hammered coin production immediately significantly increased. THANK YOU!

I made it last weekend

Thanks Fred always good to hear from you 🤝

OK

Ok Matt thanks for your thoughts.

Thanks for watching

Thanks Eric 🤝

Thanks Kev 👍

@@parkerhome1150 Thanks for your feedback, as a rule I tend to dig targets with an unstable XY if they are quiet. Rember a button with an iron loop will not give a good XY. I guess no matter how we look at it we will always be missing some targets. On some sites especially heavy iron it may be worth running the discrimination a little higher.

I guess it's how you feel on the day.

Good sound advice as usual Gary , Stubble is most people’s Nemesis , Are you still popping up to Krazy Horse ? Would be good to catch up over a coffee in there cafe 👍

Cheers Kev, I'm just about to put my Harley up for sale.

@@The-skillschool Does that mean Indian incoming 😀 My treat for coffee and breakfast 😁👍

Thanks John 👍

I think you can still set up a modified Pitch or Hot program.

OKAY

I guess they can all be adjusted on the day.

Me too Gaz

Personally I would stick to the round coil.

Andrew Houghton

No problem, tap me up when you are next out with the HD club.

I hear you Len 👍

Thanks Gary

Thanks Jason, yes the same will work with the D2, possibly better in Deus Mono. But I don't think the XY screen is as good as the D1. Probably because of the multi frequency.

@@The-skillschool , thank you

I’ve had the D1 since it first came onto the market and have only ever used the horse shoe - is the XY screen more beneficial?

Personally I think it is.

Thanks buddy 🤝

Ah do you think so.....cool 👍

Yeh it is

Thanks Tim