No video :(

Metal Truck Bed Extension | JIMBO'S GARAGE

Подписаться 261 тыс.

Просмотров 105 тыс.

50% 1

#JimbosGarage #Welding #MetalFabrication Join this channel to get access to perks! Click Link Below
/ @jimbosgarage
I had a client ask me if I could extend the bed of his work truck so he could lay material flat in the bed of the truck. This is my own design, I am sure there is probably better ways to do it but this is what I came up with and it worked out great. I fabricated this metal extension welded it to the back of the truck and with a little paint you would never know.
Subscribe to Jimbos Garage: bit.ly/JimbosGa...
HTP: www.USAweld.com
Black Stallion Welding: amzn.to/2XJHBJV
MERCER INDUSTRIES: amzn.to/2UzqdWw
Metal Supermarkets: www.metalsuper...
Grinding wheels I use: amzn.to/2PPdEpo
Buy a Jimbo's Garage Welder holders here: www.jimbosgara...
Camera I use: amzn.to/2CfEFOi
Follow Jimbo:
Facebook: / theofficialjimbosgarage
Twitter: / jimbosgarage
Instagram: / jimbosgarage
About Jimbo's Garage:
Jimbo's Garage is a channel to watch real metal, steel, welding and wood projects. #howtoweld #metalgate #bigmetalgate #htpwelders #weldtables #blackstallion #kingmetals #metalhinges

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 116

@jameshuggins4300 3 года назад

Your videos are not exactly tutorials but I like how you include settings along with your tips and tricks. I learn so much just watching someone who knows what they are doing.

@Guust_Flater 3 года назад

Projects are more fun, than production work imo. 👍😀

@edwardwaugh3877 3 года назад

Every time I watch your videos I feel like I need a HTP welder,

@ekbanjosworld4926 2 года назад

Jimbo ! You got everything else ! Snag you one of those little Wen File Belt Sanders ! Don't buy 36 grit it breaks off the belt, get 60 grit ! You stick that little dude in all kinds of tight places for cleanup ! I use it for hard to reach spot welds !!!

@stevusbeavus720 3 года назад

Sometimes to save time for pieces that have an end cap, instead of grinding. I take I back to the saw and push it flush with the weld and chop the welds off on the saw. Quick n easy

@supermotobuild774 3 года назад

A tip for you jimbo is when plasma cutting into a piece. to make a whole go at a angle til you blow through and have the plasma gun be straight up and down it cuts down on the blow back. Give it a try and great video! I run a hyper therm power max 30 a lot. And its stuff you learn when plasma cutting

@Charles-tj8ol 3 года назад

Don’t see how that whole project took only 3 hours. Regardless, very nice on the design and execution.

@JustinPaul1st 3 года назад

JG I'm not a metal fabricator but I've learned a lot from your works, 👍👍👍. Just something I learned along the way... When cutting a piece of metal and your blade is a it short for a single clean through cut... Rest what you cutting to maybe 1 inch piece of metal underneath and you will be able to make that cut through, 😉😉😉🇿🇦🇿🇦🇿🇦

@amilcarmoncada1801 3 года назад

Otro claro ejemplo de su habilidad en la fabricacion con metal esta ves es esta extensión de caja de camión , mis felicitaciones y respetos para usted amigo Jimbo desde Venezuela.

@dougsweldingfabrication953 3 года назад

Jimbo... We can all appreciate having to figure out a way to get things done without a helper. I try to tell myself that I'm a better person for doing it by myself. hahahaha. Good job on the extension. Thanks for the great videos, as always.

@CaptK-py8rq 3 года назад

Now I know what to do with all my old blueprints...Great video as always!

@julietphillips1991 3 года назад

You are the best...always doing a really fine job!

@7rixee 3 года назад

Variety is a spice of life. I like stick for thicker and mig for thin material. For furniture or gates or something I can get a nicer finish with mig and thin rods won't last long anyways so you'll have a lot of stops and starts which don't look so nice.

@n0rth3rnlight 3 года назад

WHO knew... Jimbo Burns Rod like a fucking PRO.

@9856CB 3 года назад

Wouldn’t a solid weld on the top of that extension prevent water from getting down in the crack and resting or at least creating rust spots

@johngriggs5910 3 года назад

Another great video love watching I am no welder just started out but wow learn a lot from you! Been in construction for over 30 years and love it!

@TheSpud1129 3 года назад

Jim - a few things to know about the stake pockets. They are a specific size to fit the panels. I think by adding the angle to the inside, the posts may not fit. Also - they have to be welded 100% along the sides to take the side load from the stakes. Also when placing them, you have to check and see how the panels are fastened. Some get pinned below the stake pocket, others just drop-in and are secured when the tarping system is attached. Placing them too low may sometimes not allow the posts to correctly fit. Loving the videos. Take care.

@mikez4132 3 года назад

I learn by doing and seeing and this is a great channel for people like us.

@Rubbernecker 3 года назад

Beautiful!!

@arteserralheiro3658 3 года назад

Gostei! Salvador-BA, Brazil

@raffaeldourado2025 3 года назад

E nois Manga-MG,Brazil 😆

@mickey533 3 года назад

Very nice work

@speezguy 3 года назад

Nice work

@robertmendiola7200 3 года назад

Beautiful Work Thank You for Sharing

@SchysCraftCo. 3 года назад

Turned out very well there keep up the great craftsmanship and hard work my friend weld on

@chaseweeks2708 3 года назад

I think if I was going to plasma out those holes for the stakes, I'd still start with the plasma cutter instead of maybe drilling a starter hole, but I'd start the plasma cut about a half inch inside the line, then once the cut is all the way through slide up to the straight edge and get it done. Kind of like blind-starting jigsaw in the middle of a hole then working out to the line once you've got the blade through.

@garyyorke1080 3 года назад

I've been watching for a long while now and I guess having just 3 welding machines I get by ..I'm still learning on the tig , watching you has helped a lot with just the basics and then the technique. I've always wondered but I guess having soo many welders you could be spoilt for choice for the tool for the job. What actually makes you use a certain one . Great video as always

@AW-Services 3 года назад

Good use of technical drawings for masking paper

@garypitt7020 3 года назад

It was interesting to watch, thanks for your time and inspiration.

@andrerossi5010 3 года назад

Very good.

@wesleya.wright8498 3 года назад

If you use a 1/4 in. drill in the corners of the pocket holes the plasma will start ALOT easer and work better.

@robertl5168 2 года назад

Great video.

@cdewees4612 3 года назад

Hey Jim. drill a pilot hole first before you start the plasma cut. great video! Luv the shop. stay cool!

@jessejamesmorales5016 3 года назад

pshh

@Ramdodge582 3 года назад

90 amps with 1/4" in 3G down? your the boss

@paulmorrey733 3 года назад

Thanks Jimbo

@victorshaw7173 3 года назад

Try using an aluminum straight edge when plasma cutting. Stays more clean than steel

@deejohnson5163 3 года назад

I am not a welder (I play one on t.v. :))) ), but I have to say that is some real nice fabricating. I ist thought you were an auto repair shop by the title. Very nice job.

@richardwalters1803 3 года назад

great work, fun to watch

@tonybaggett1984 3 года назад

Jimbo another great project and work. You have got to check out the 1000 lb lift table at Harbor Freight. You could definitely use a rolling gantry but I know your limited in space. That's where the lift table comes in. I swear it will change your life and can be folded up and tucked away. They make other more expensive ones to. You could also look up high lift pallet jack those are awesome to. Both are great back savers.

@JimbosGarage 3 года назад

Thanks for watching Tony, Yes i have been looking at that one. But i might make one that is more the right size for me. Jimbo!

@DriverA320 3 года назад

You the men, great work!!!

@Brian18741 3 года назад

Great work 👍

@miguelgarrido8470 3 года назад

Try having a few different size speed squares just for plasma cuts

@BRICOLAJELISTO 3 года назад

Buena ampliación de plataforma. Un saludo.

@lennybivona9534 3 года назад

Like you, I always sign my work!!!!!!!, called pride.

@vassilisgr1972 3 года назад

WHEN YOU WANT SOMETHING TO HOLD...UPHILL . ALWAYS UPHILL , ESPECIALLY STICK WELDING...

@sendit220swift3 3 года назад

Agreed

@ZILAwelds 3 года назад

NO THAT ROD IS SPECIFICALLY DESIGNED FOR DOWNHILL !!!

@DK-vx1zc 3 года назад

super job !

@ps-mg2ki 3 года назад

Good job

@Vasilis_Chatzis 3 года назад

Great video Could you make a video about demolition hammer and hammer drill ?

@RichJarvis 2 года назад

My question will make it very clear that I don’t know anything about welding… so with that disclaimer, Is it possible to do something like this, say add another foot in length to the back of a flatbed truck where it would be strong enough to attach Ramps and drive a vehicle up on?

@johnnymack8442 3 года назад

Nice little machine. Is that a 120 volt or 240 volt ?

@619DioFan 3 года назад

Nice. looks factory. did you have to make the longer brackets for the top gate latches ?

@TheLedzeppfan 3 года назад

I cant find any videos on those messer electrodes. If you could make a video with more info on those electrodes i would gladly appreciate it

@reganberistain7177 3 года назад

MÁSTER!!!!!! 🤤🤤🤤🤤

@juandediosagustin1532 3 года назад

Exelelente trabajo

@johnsutter1497 3 года назад

What is the name of those welding rods?

@vladsochi2326 3 года назад

Джимбо! Постарайтесь сделать субтитры на русском пожалуйста, к вам большой интерес в России)))

@protvinorock 3 года назад

Дружище, это нереально. Он и так старый, времени и так немного осталось. Ещё и для русских заморачиваться. Проще нашим, ну тем кто не знает английский подучить. Да и слова то одни и те же, отрезал, прижал к столу струбциной, приварил, зачистил.

@TomvdHeuvel 3 года назад

Hi Jimbo, very nice job! I was wondering what the brand / type of clamp it is that you are using @4:10, i have some that are similair from Scangrip ( Danish brand ) but they dont make them anymore.

@joseexpeditocolaresfilho9908 3 года назад

País : BRASIL 🇧🇷 Estado : Ceará Cidade : Fortaleza 👏👏👏👏👏

@shannonstiles8751 3 года назад

Just needed a few more "

@michaeldavis943 3 года назад

Great job, but why'd you use the stick welder on the truck??was it due to the wind blowin away your MIG gas?

@BICKFORD54000 3 года назад

I think he wanted to do down weld at the electrode, there are cellulosic electrodes that penetrate properly with an MMA post. With the MIG it was necessary to make a rising weld it is more complicated and longer :)

@garrettjames9295 3 года назад

What shade glasses do u use for plasma cutting

@naphosuclupe2877 3 года назад

Excelente, saludos.

@daltonhamblin350 3 года назад

Another great video Jimbo! I watch all of them! That’s a sweet little stick welding machine. Why’d you decide to stitch weld that thing with the stick instead of mig? Was it just for the heck of it? 😂

@hilltopmachineworks2131 3 года назад

Welding outside there is always the chance of your shielding gas getting blown away by wind with mig welding. Wind is not an issue with stick.

@alamray 3 года назад

i thought you are extendiiiing it by like 3 4 feet... did you just need extra 6"??

@Thingsandstuff247 3 года назад

I tried looking up those stick electrodes I could not find them on the website plz message back

@genildoaugusto7421 3 года назад

Show show 👍👍

@ManCrafting 3 года назад

95amps for 1/8 in rod. I’m guessing that’s only on an HTP. If that was a Miller or Lincoln it would have been 125 amps.

@alexthebear 3 года назад

Why extension is so small ? Not a few meters ... Hmmm ...

@markc6714 3 года назад

I'm confused why you sometimes choose MIG welding and other times stick welding

@ZILAwelds 3 года назад

Outside with the wind stick is more forgiving ... Stick is a spray arc, typically gets “better and stronger” welds than short circuit mig .... and is more “fool proof” in a situation with wind and potentially dirty metal

@fnkrodigaz1841 3 года назад

Mig weldig is good indoors, if there's some wind stick is better

@baldanddangerous1572 3 года назад

another great job jimbo.....stay safe.....all the best.......................dougie

@josepinedo4389 3 года назад

I gotta try that vertical down smaw process...... Bitchen Job

@bjbrooks2635 3 года назад

Approx how much would you charge for this? Would like to hear everybody respond as to what you think the cost was.

@ryanowens2771 3 года назад

id guess the material cost at about $200-250 plus consumables plus time depending on your shop rate maybe $500-550

@ZILAwelds 3 года назад

Material my cost about $150 .... by the tine the customer gets it its $200 for material .... The job is “worth” $600-800 where i live ....

@hilltopmachineworks2131 3 года назад

Material $150. Labor 3 hours at $75 an hour so about $375 around here.

@LaredoHandyman 3 года назад

I'd charge about 500 for that job.

@omarmoreno1772 3 года назад

downhill welding lol stick i wont put to much weight in that haha

@user-cz6gv7wk4c 3 года назад

Вечер добрый, будьте добры сделайте субтитры на русском. За ранние спасибо.

@izbiz671 3 года назад

Hello JG!!...what was that stick welding electrode again?..thanks

@JimbosGarage 3 года назад

Thanks for watching, MG80 from usaweld.com Jimbo!

@izbiz671 3 года назад

@@JimbosGarage Thanks Jimbo!!..you make us feel better with your videos

@grktycoon 3 года назад

@@JimbosGarage Hi JG, long time subscriber, excellent work and really impressed by your work ethic. Can you please tell me are the rids 3/32" or 1/8" I believe you said 1/8" what is better in your opinion. Thank you!

@ZILAwelds 3 года назад

usaweld.com/products/messer-mg-80tac-plus-stick-welding-rod