Тёмный

Meus Racing 2-Speed Transmission For The TRX4M! Installation, Speed Tests & More 

Cape Crawlers
Подписаться 125 тыс.
Просмотров 37 тыс.
50% 1

In this video I install and review the new two speed transmission and motor combo from Meus Racing for the Traxxas TRX4M! This is a drop in unit that will radically change the performance of your TRX4M. With the ability to manually shift the transmission, you can keep the stock electronics, or you can install a micro servo and shift electronically using an aftermarket radio/rx combo.
Order the transmission here: amzn.to/48DLqpd
Or from Meus direct here: www.meusracing.com/products/m...
Cape Crawlers Merch: capecrawlers-shop.fourthwall....
Affiliate links:
Tower Hobbies:
Horizon Hobbies:alnk.to/aLFxP5n
Amain Hobbies:
FairRC: shrsl.com/3w3co
Discount codes
5% off RCAWD: rcawd.com/?ref=E5EBF8Fu - discount code CapeCrawlers
$10 off any order $100 of accessories: www.fmshobby.com/capecrawlers - discount code Capecrawlers
5% off any Injora products: www.injora.com - code Capecrawlers05
10% off any Little Guy Racing Parts products:
littleguyracingparts.com/ - code CAPE10
10% off any Flubberstufferz products: flubberstufferz.myshopify.com/ - code Flub10CC
10% off any Cow RC products: cowrc.com/ - code CAPECRAWLERS
Email me with suggestions or collaboration inquiries: capecrawlersRC@gmail.com
Follow us on Instagram @capecrawlers!
Timestamps
First look and key features: 0:33
Demonstrations: 3:53
Setup and first runs: 5:35
Improvements: 8:38
Speed comparisons: 10:06
Indoor course runs: 11:15
Final thoughts: 15:38

Авто/Мото

Опубликовано:

 

25 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 89   
@CapeCrawlers
@CapeCrawlers 5 месяцев назад
Timestamps First look and key features: 0:33 Demonstrations: 3:53 Setup and first runs: 5:35 Improvements: 8:38 Speed comparisons: 10:06 Indoor course runs: 11:15 Final thoughts: 15:38
@AndoLife
@AndoLife 5 месяцев назад
Any possibility for doing the MEUS trailing arm kit review?
@kennethrobinson9008
@kennethrobinson9008 5 месяцев назад
Adding a brushless motor increases performance to another level (not easy). Furitek Integration ESC, 3s, and paired to a Komodo motor is a different beast! My favorite TRX4M build by far.
@samintrepid
@samintrepid 5 месяцев назад
I Install a Furitek Cedar brushless motor in this transmission and the set screw on the pinion gear rub inside the trans gear. You have to reverse the pinion gear on motor but I wasn't able or put a shim between motor and transmission case.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ynHqa3Xvk6E.html
@valledecauca1087
@valledecauca1087 5 месяцев назад
And. The cedar?
@samintrepid
@samintrepid 5 месяцев назад
@@valledecauca1087 As you can see in my video, the cedar motor are really fast in second gear, much faster and more trq than the bruhed injora 48t.
@Trevinator1990
@Trevinator1990 5 месяцев назад
@@samintrepid i was able to flip the pinion around on the cedar motor and install it in the 2 speed. its really the best setup you can get on the trx4m.
@user-ty2by5oi2w
@user-ty2by5oi2w 4 месяца назад
ive got the meus racing 2 speed on a furitech 2s brushless lizard pro and tornado combo
@wapartist
@wapartist 5 месяцев назад
Oh man! I knew someone was gonna come out with an answer for the 2 speed competition
@gottivito478
@gottivito478 5 месяцев назад
This is the best looking trx4m i ever see , good job man!
@joseaponte2829
@joseaponte2829 5 месяцев назад
I like the whole set up that you put together on the TRX4-M great looking set up crawls very well with the 2 speed Meus Transmission, great review i like the video.
@makestuffbetter19
@makestuffbetter19 4 месяца назад
Bro! this is awesome! and really affordable too! Thank you for the video!
@rcjoe406
@rcjoe406 5 месяцев назад
This is what we need and needed 😊
@MysticRiverRC
@MysticRiverRC 5 месяцев назад
Slow crawl is awesome! That is one of the biggest limitations for the stock Trx4m. I avoided getting crawler gears though, because it robs you of wheel speed for trailing. This solves the issue.
@cwthemachinist
@cwthemachinist 5 месяцев назад
Wow! Overall, what an amazing build. The whole thing looks exceptional. The wheel and tire combo=mean! The Meus trans is truly impressive and a great deal. Great videos as always! 🤜🤛
@Mariogrc3
@Mariogrc3 5 месяцев назад
I found shock o-rings give a clean wire management option. If you don't want zip tie blocks hanging around
@egm092478
@egm092478 5 месяцев назад
Another great video
@KenMrKLC
@KenMrKLC 5 месяцев назад
Awe man! I was hoping you installed it into the stock chassis…… I was interested in the look and fit there, not in this CF one. However I see the want in this build…. It’s sick
@garretthuff1905
@garretthuff1905 4 месяца назад
Just added this to my trx4m, waiting for the new radio to hook up the shifting servo. What a neat invention!
@tifflynn2215
@tifflynn2215 5 месяцев назад
Got this same setup and could not figure out the springs for the servo so for now it’s manual but very awesome transmission
@NBC_NCO
@NBC_NCO 5 месяцев назад
Nice gear box.
@BerkshireRC
@BerkshireRC 5 месяцев назад
Yea snow here in the berkshires only 8 out there today been working on my mini also
@mark-mj5dl
@mark-mj5dl Месяц назад
Dont forget the overdrive and underdrive gears for the diffs from injora.
@dandaman8977
@dandaman8977 5 месяцев назад
@CapeCrawlers Just subscribed, so stoked on your content! Looking to get a mini comp crawler and was totally sold on the CR18P Evo Pro.. until I saw this build!😍 Any idea if the IR40 body will fit on the Evo Pro? Thanks!
@PerdueRC
@PerdueRC Месяц назад
Should try the oppai factory chassis with that IR40. Incredible upgrade for that body.
@patrickgeorge4306
@patrickgeorge4306 5 месяцев назад
Thanks for the video! I love my 4M's, but by far the worst part about the truck is the gearing options especially with stock electronics. In my tarantula I'm running a cedar motor on 3s with crawler gears, and my high trail has an fcx24 trans using a 3D printed skid. Good to see the aftermarket stepping up with more options. Now the question is who's going to figure out how to combine the 370 motor and 2 speed???
@RCCrawlerz209
@RCCrawlerz209 5 месяцев назад
& I thought Injora did a great job, giving us a big ass 2 speed motor for the M, this Meus version looks more technical than Injora's, honestly. Lol
@sammyboswelldirtybrc7580
@sammyboswelldirtybrc7580 5 месяцев назад
Man I wanted one of these thanks for the info now I don’t want on unless they change the gearing was hoping for a contender for the fms that sucks hope they come out with different gearing for a single speed to out run a two speed 😢
@senKeiser
@senKeiser 5 месяцев назад
Nice! Do you need the one with their motor or the gearbox only should work with the Traxxas motor?
@thomascook-ii6qo
@thomascook-ii6qo 5 месяцев назад
wish it fit the scx24 had my scx24 for a few years. i got the fcx24 blazer a couple months ago and love the 2 speed. been thinking about putting a fcx24 trans in my scx24
@whiteslick00
@whiteslick00 5 месяцев назад
thanks for the videos. best budget on wide axles? for scx24
@GarrettHigdon123
@GarrettHigdon123 5 месяцев назад
I love your channel and I'm thinking about getting a trx4m ford bronco so do you think you could post more videos on it Pls
@AgeOrmstad
@AgeOrmstad 5 месяцев назад
Sweet 😎💪
@giopirmisashvili5514
@giopirmisashvili5514 4 месяца назад
❤❤❤thank you
@Ihatefakesales
@Ihatefakesales 3 месяца назад
I still will outrun, outcrawl, and outpull (30lbs) with a single speed furitek setup. After doing the math, from scratch it would cost the same to furitek it as it would to 2 speed with the stock motor, a good esc and radio, and you would not have 3x the runtime you have with brushless. Now 2 speed brushless would be an absolute king i think.
@emanuel616
@emanuel616 5 месяцев назад
Was gonna try this out with some meus portals but After seeing the speed I think, straight injora axles with the fast diff gears ⚙️ 🤔
@annasoming
@annasoming 5 месяцев назад
I really like the look at this injora and seen another yt where he built one completely out of injora parts. This is an interesting rig.. at what point does it not become a trx4m and becomes an injora24? I think I was partial to the single speed with that injora esc. i have a 2 speed and everytime I switch over and if I'm on a hill, there is enough slop where it falls back. So, pro's and cons as always in this hobby right? Thanks for the vid!
@jleftbrane
@jleftbrane 5 месяцев назад
Did you bind your mt12 to the injora transceiver by chance? Or any furitek receivers?
@Emanj1023
@Emanj1023 5 месяцев назад
Just bought a trx4m high trail and spent 80$ on injora using your discount👌🏽
@CapeCrawlers
@CapeCrawlers 5 месяцев назад
Awesome! 👍🏻👍🏻
@matthewwmullan
@matthewwmullan 5 месяцев назад
finally found a use for emaxs
@dannykerby9580
@dannykerby9580 5 месяцев назад
I would like to visually see why it wont work in the ripper chassis. If it means just not having the interior plate due to height and not having to trim any cage bars, I would go for it in mine.
@LostFozz_OverLand
@LostFozz_OverLand 5 месяцев назад
Just wondering what motor will work with this 2speed? I have the injora pro 48t and the brushless motor on the way but will thay work on this tcase
@monstermaxsrcs5893
@monstermaxsrcs5893 5 месяцев назад
Nice can you do a video of a budget build for 60 dollars please for the scx jlu thank you
@valiant7357
@valiant7357 5 месяцев назад
Will the Furitek brushless motors work with this transmission?
@OkRC.crawlers
@OkRC.crawlers 5 месяцев назад
So if I have stock ECM and radio/reciever will this work? I just have to manually change the gear?
@WarmGlassOfBatteryAcid
@WarmGlassOfBatteryAcid 5 месяцев назад
lol my trx4m has 4 servos on it. Front and rear steering, winch and now the transmission
@boiledtea479
@boiledtea479 5 месяцев назад
does this exist for the scx24 aswell?
@M3rwin6
@M3rwin6 5 месяцев назад
Great content! Are those the +4mm axles? Also where did you find those frame sliders?
@CapeCrawlers
@CapeCrawlers 5 месяцев назад
Yes, +4mm with the new laydown servo option. The sliders came with the transmission
@kipabell2474
@kipabell2474 3 месяца назад
Very cool rig but I can’t help wonder… with all those new parts, when does it stop being a trx4m? 😅
@user-ty2by5oi2w
@user-ty2by5oi2w 4 месяца назад
can you do somethins on the meus racing portals
@sandytoes8535
@sandytoes8535 2 месяца назад
Will this fit the stock trx4m high trail chassis
@shelbyGT40
@shelbyGT40 5 месяцев назад
I want to see how you build a course.
@brad4407
@brad4407 4 месяца назад
You want to stop stripping screws? Ditch the hex wrenches and use T5/T6 torx bits.
@saltysteel3996
@saltysteel3996 3 месяца назад
I have a set of titanium Team Losi drivers and they have never stripped a screw head out. Over 10 years of use and the drivers still look brand new too.
@brad4407
@brad4407 3 месяца назад
@@saltysteel3996 Nice. I meant T6 and t8 anyway and a too lazy too track down my comment. Never using hex again
@user-ui1ew3ws9z
@user-ui1ew3ws9z 4 месяца назад
What about 3s battery run ?
@VetteWay2Fast
@VetteWay2Fast 5 месяцев назад
Have u tried the hot racing ultra low 60:1 gearing? Been searching for videos on it but none that I can find. Want to see it compared to the standard 40:1 low range gears
@CapeCrawlers
@CapeCrawlers 4 месяца назад
I have not, but the low range here is pretty close to 60:1. Super slow! Would be great with a lower turn motor though
@VetteWay2Fast
@VetteWay2Fast 4 месяца назад
Gotcha, what low turn motor would u recommend?
@raidersperez1278
@raidersperez1278 2 месяца назад
I’m assuming that bronco Body would clear the esc and battery? Seems like this body is thinner than the bronco right?
@CapeCrawlers
@CapeCrawlers 2 месяца назад
Yes it will fit the bronco. Much tighter in the IR40
@Sparroh
@Sparroh 2 месяца назад
Can you go over the electronics and radio again? It doesn’t work with the Traxxus ecm and remote?
@CapeCrawlers
@CapeCrawlers 2 месяца назад
You have two options: 1) use the manual shifting mechanism (comes with the kit) and keep the stock radio 2) use a micro servo to shift gears and use an aftermarket remote The Traxxas radio doesn’t have an extra switch for the servo to do electronic shifts
@user-pb7dv7ik7r
@user-pb7dv7ik7r 2 месяца назад
Is it still water proof
@user-pb7dv7ik7r
@user-pb7dv7ik7r 2 месяца назад
Could you run a brushless motor in the 2 speed transmission
@CapeCrawlers
@CapeCrawlers 2 месяца назад
Good question. I haven’t seen anyone try it but that would be an awesome combo. Maybe I’ll give it a shot
@keith6360
@keith6360 3 месяца назад
is it water proof? My son wants to know lol
@matthewwmullan
@matthewwmullan 5 месяцев назад
how heavy?
@Steve_J81
@Steve_J81 5 месяцев назад
Injora purple 48t would be perfect for the 2speed, the 87t Meus motor is way too slow.
@tuna3461
@tuna3461 4 месяца назад
My thoughts exactly. I plan on buying this and seeing what it can do. Even on totally stock gears it’s quite quick!
@djjinx919
@djjinx919 4 месяца назад
So you have to re-position the battery?
@CapeCrawlers
@CapeCrawlers 4 месяца назад
Yes, unless someone else has a way to retain the stock tray. I couldn’t make it work on mine
@spinebrackes1667
@spinebrackes1667 5 месяцев назад
can you run the injora purple Moter
@CapeCrawlers
@CapeCrawlers 5 месяцев назад
Yes, that should bolt right up
@jonathanmcdonald5411
@jonathanmcdonald5411 5 месяцев назад
Awesome setup. I wish the 4m came with a 2 speed, like the fms rigs, but it's good to know there's an option out there. I would like to see the wheel speed with the injora 48t pro motor. Bet that would pep it up.
@MrsRabbit8
@MrsRabbit8 16 дней назад
Do you think it's possible to put a 370 on this transmission?
@CapeCrawlers
@CapeCrawlers 15 дней назад
If I remember correctly, Meus said explicitly that the 370 would not fit. Not sure if thats changed or not, but I remember the incompatibility when this was first released.
@DJ.1001
@DJ.1001 5 месяцев назад
Losing the battery tray us a huge bummer
@jackjarboe4565
@jackjarboe4565 5 месяцев назад
Is it waterproof?
@CapeCrawlers
@CapeCrawlers 5 месяцев назад
Good question. I suppose if you used a micro servo that was waterproof it would be. I didnt crack it open to see how well greased it was
@jackjarboe4565
@jackjarboe4565 5 месяцев назад
Ok thanks.
@johngilson7085
@johngilson7085 3 месяца назад
If you are using the MB100 ESC and not running a 3S LiPo you are losing performance. Spektrum 850mAh 30c batteries fit the stock battery tray with a slight modification. They last longer and provide improved performance. There is no reason not to upgrade.
@CapeCrawlers
@CapeCrawlers 3 месяца назад
I haven't even tried it on 3S, and I have those batteries too. I'll give it a shot!
@truekingfpv
@truekingfpv 3 месяца назад
Once every component is replaced on a crawler, is it safe to say that it’s still the trx4m? 🤣
@CapeCrawlers
@CapeCrawlers 3 месяца назад
Only for the algorithm lol
@CreeksideEastRC
@CreeksideEastRC 5 месяцев назад
Great video as always! I have the body and some other goodies on order and I can't wait. Have you seen the chassis by @Oppai_Factory made for this body? I have one on order now....
Далее
TOP 5 Tips To Stop TORQUE TWIST!
13:33
Просмотров 20 тыс.
Volkswagen судится с Volkswagen?
01:00
Просмотров 1,8 млн
The Meus Racing MB24 Is My Favorite SCX24 Build
18:49
Cut anything, even diamond
13:07
Просмотров 1,1 млн
The Injora IR40 Is My Favorite TRX4M Build
24:00
Просмотров 35 тыс.
#car #shortvideo
0:21
Просмотров 1 млн
Magirus-Deutz 232 АНОНС
0:58
Просмотров 739 тыс.