MF135 6 Speed Restoration #46 Dismantling the Hydraulic Pump 

Another top end video Lance ,please keep them coming I am learning so much ,a really big thank you.

Volume is good on this video and your voice is nice and clear. Looks like not having that filer on the pump really took a toll on it. If I were able to get a quality new one, the old one would hit the scrap barrel.

Hello, good afternoon friend, I really liked your explanation, I can see that you understand the hydraulics of the Massey Ferguson, I have one of the 200 line and it has a knock that can only be heard when it reaches the desired height, that is, when it is lifting a heavy implement it only makes noise if you hear when it reaches the height defined by the interior lever, that is, if you set this lever to lift 40cm it lifts it up to there without making any noise and when it reaches that defined height it starts to make a beat, you get the idea that this is when it tries to balance the pressures to maintain that position exactly what you think it might be...Thanks from Portugal.

Good job👍👍👍

Very useful

Great video again. Believe it or not, I heard that the 30 minute limit is in cameras deliberately to help prevent bootleggers from recording films in the cinema, so it might be hard to find a camera without it!

Hi Lance thank you so much for all the time you have put into educating us diyer's The video's are clear and instructive great job. A question Lance my 135 6 speed has pressure control, can you bypass this by putting a plain standpipe between the pump and lift cover , take out the blanking plug in the pump and inserting a normal relief valve Many thanks Rob

G,day mate I got a feeling you will buy a new pump for it,from what you’ve said good luck mate regards John

Bardzo dziękuję za pomoc pozdrawiam

Excellent series of videos... I have a MF135 with a 897490M1, but I am having an issue finding a replacement pump here in Canada. Will another pump mdl fit in place?

If you need to replace the valves on the pump would any grinding be needed or could you just fit the new ones in just the way it is

Great video, it helped me a lot, thanks. Do you know what MK the pump is? Is it a Mk1 or Mk2?

Is this the same procedure for mf 188..i am having a knocking noise when lifting arms??

If i take the liftcover from a mf 565 (1977) can i expect the same as on your video about the 135 or is it compleet different? Graetings from the Netherlands

I have an older MF 230 in the shop right now with a stopped up hydraulic pump screen full of metal. It has ground speed and live PTO. The ground speed gear on the pinion shaft as well as the pto gear it meshes to have broken teeth from a floppy detent on the pto shift lever. If I’m never going to use ground speed pto, do I need to replace those gears at all?

is there a video assembling the 135 top cover? i want to assemble our 188 fitted with a pressure control

Was the pump still suppling pressure and able to lift anything .

You need a timer/stop watch with an alarm

Hello. I have a question. Will this pump fit a Massey Ferguson 35?

Existirá la posibilidad de subir los videos en español

Vietsub pleas thk you beaar

Looks like by pump and buy pump.