MF135 6 Speed Restoration #58 Fitting the Selectors

Подписаться 51 тыс.

Просмотров 15 тыс.

50% 1

In this video I fit the selector forks and rails to the Massey Ferguson gearbox.
Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from www.queenslandt...
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project.

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@davidsample9130 5 лет назад

Nice, I really enjoyed this. Watch the weather.

@BundyBearsShed 5 лет назад

Thanks David.

@BleuJurassic 5 лет назад

you really forked out on this one, the interlock is so simple but so smart

@BundyBearsShed 5 лет назад

As long as I didn't fork up we are all good lol

@peterhoughton1589 Год назад

Lance, I've only recently bought my 6 speed MF135. Often the main gear stick, won't shift sideways (L-R) without having to work it left to right several times over. After watching this video I suspect the 2 selectors that fasten on to the selector shafts (for selecting R,1,2,3) aren't lining up properly when the tractor is in neutral. (Maybe a selector has come loose or a detent and spring could be faulty?) Before I take the steering box off to look at it, is there anything else I should look at or suspect, that you can think of please? Hey many thanks for making these videos, they're absolutely bloody brilliant. I'm just your everyday vegetable farmer in NW England. I understand basic engineering but I've never ventured into a gearbox before but I fancy having a go at this. Appreciate your help. 👍

@BundyBearsShed Год назад

It could be that a selector has come loose but opening the top will probably tell the tale.

@peterhoughton1589 Год назад

@@BundyBearsShed I fixed it. The main gear stick was slightly twisted and wasn't quite fitted into the cup correctly so the square piece on the bottom end of the gear stick was turned like a diamond shape so jammed in square slots, on the selector shafts, when the gear stick was moved from side to side. The tractor has had a replacement steering box fitted some time in its life and they didn't put the gear stick in properly. It changes gear really smooth now. 😁

@asimmh7956 5 лет назад

Good work sir♥️♥️♥️♥️♥️

@BundyBearsShed 5 лет назад

thankyou.

@natee4554 Год назад

Hi, I have 1965 Massey faurgeson 135 3 cylinder diesel , I put new clutch 10 in half and when I put it together the engine wasn’t mounted in I have to forced it so now I cannot shift the gears unless I have to shut the engine off and I have to put it in reverse and then if I put it in first and second gear doesn’t shift unless I shut the engine off.

@BundyBearsShed Год назад

I think you may have bent the clutch plate when bolting it together. Possibly split it again and line it up better.

@birddog7492 Год назад

I have an old 135 MF stuck in Neutral on my high / Low rang selector. anyone have an Ideal on what might be up with it? I've put new plungers and springs in it and changed out the Neutral safety switch.

@BundyBearsShed Год назад

Do you think one of the screws that holds the selector forks may have come loose? I have seen one side of the fork break off as well. Hard to say.

@birddog7492 Год назад

@@BundyBearsShed I opened the top up and all looks good. It's just my hi/ Low will not shift into low at all and it will not lock into High Range. I'm going to split her and get a look at my H/L selector gear.