Micro Pavé - 4.2mm Center Stone - 30 small diamonds 

Rascal77s that’s very nice to hear ! ;-)

Hi Marie Young, Thanks for your comment. I'm also constantly training to become better and optimize my work.

Thank you for your comment Marie Young. Where are you based?

@@heinikendude i am training myself, this video es very helpful i will try doing it while watching and try to do my best

Instablaster

@@heinikendude is there any books out there that train in the pave setting techniques?.... I'm trying to train myself and I'm having trouble with spacing of stones and drilling my holes in a straight line.... thats as far as I got so far...😕

You're welcome ;-)

Thank you Tanya

Nanaya Nortci English maybe ? ;-)

Cesco Monti thanks for your comment

Thanks Leuthsamone for your nice words !

Chana Lowenthal haha thanks !

Thanks !

jason clements you’re welcome

Joachim moczko hi, is it possible to reply in English, French, Spanish or German ?

vandoorenniels nou

Thank you Jambu for your kind words.

Thanks for your nice words Quyen!

Thanks Babu

Henry Alexander Morales Moya Gracias amigo !

@@heinikendude , ... ich bin deutscher Goldschmied und attestiere Dir : hervorragend gemacht !

You're welcome!

Thank you Wladimir!

Thanks Cetin!

Just not bumping into the bench ;-) And yes trained with Jura !

Keith Lester thanks for the comment

Gracias Antonio da Costa! ;-)

Blazing Crickets correct !

Hi my friend, do you speak english? Thanks for your time

@@heinikendude Hi I little speak english. Your work is beautiful

Thanks Sar!

Hi Shamimia, I would suggest to contact Juratools and mention my name. they can help you! ;-)

Gracias!

Hi Arel gr, I do not completely understand your question. Could you reformulate? Thanks in advance!

Gracias Antonio!

You're welcome Donovan!

Joachim moczko thanks !

Hi Coralscraftslady, ah thats nice to hear! Hope your ring comes back well!

Yes, it came back, and is ok, but I am very careful with it now! It isn't nearly as elaborate as that one, but the small diamonds are very high quality, and it sparkles so! Thank you, for your kind words! :)

What is this ring design called? Where can i buy a ring like this from?

Dankjewel Jan ! Stel je commentaar zeer op prijs ;-)

HI Trevor, Sorry for the delayed response. It's a dental contact spray to see where the big stone press the metal.

jose joshuam used a self made 60 degree graver with a small ‘cheek’ to go round

We use different gravers to cut the sides and remove the metal. And obviously we measure very precise every stone before setting. ;-)

@@heinikendude that means you match the burr size to the stone size.

Thanks Uma ;-)

Albert Haghverdian yes of course! That’s dental spray! ;-)

@@heinikendude Thanks

Thanks Gary Jay! ;-)

Hi Wanderson, hablas español o ingles? ;-)

Almusawy Yousef thanks

Gary Zeos you should, in a circle Pattern always start dividing from the center. The normal division is all with the same diamond diameters. This shows different ones and should be via trail and error. Also if you take the diameter of the stones and you mark these on the circle (which you drew from the center point) you can just keep marking until you reach the last one. Most of the times these do not exactly match then just continue with tiny stripes and decrease your diameter by turning ‘inwards’ this way you should eventually meet one of your previous marks.

vandoorenniels I didn't get to much but thank you for your reply !!! is there any video or a book that can explain it more clear ?

Gary Zeos why don’t you just start by mapping out the actual diamonds bottom up on the jewelry. And use a divider (take the diameter from the diamond) and mark the position. I’m happy to provide some more details over the email. Info@vandoorendiamonds.com

I would never use diamonds with lower quality than SI1. Because you end up paying more for the diamond setting services than the diamonds itself. That would be pointless ;-) Good luck with your decision.

@@heinikendude , in this particular case, i would not have to pay for the labor of the job, only the gold weight per gram. it is a friend making them for me.... my question is, is the bad quality a huge turn off when a diamond is that small and there are like 40 of the next to eachother? will it have some shine and sparkle? (of course not vvs shine)

It will defenitely shine. But it will look like there is some sort of grey mask over it.... I would higly advice against it. Sorry but that´s my honest opinion

Thanks Araboui for your nice words. We have a nice job and very nice customers. So yes we can make an honest living ;-)

@@heinikendude thank you so much my friend :) You gave me hope I had lost because I love this art and find myself happy while I am practicing it. Your advice I have accepted with all my heart and I will send you the first job I start with and I hope you hear your opinion

arbaoui abdennour you’re more than welcome ! The job we do is awesome and I really love it 💎

That would be a more older technique but the basic principle is the same.

@@heinikendude basically yes but but it's a pity there isn't even a video anywhere with this technique. :(

Александр Корнеев Yes, what is the green thing?

He can see if the stone touches by spraying that color. If there's no mark left on the green, the stone isn't deep enough and he has to adjust the hole. If there's a mark left on the green, he can see exactly where the stone is touching on the hole.

Sorry for the late reply. Green is a spray named : occulus' it shows me the contact points. So I know where to drill deeper.

Great explanation!

Hi M, email me at info@vandoorendiamonds.com

Thanks Rudy!

Looks like is Marks how far the pavilion touches the metal. So the setter must use the round bur to remove more metal.

Yes, it's you are correct. The name is Occulus Dental spray

Haha, what a great comment! ;-) Thanks

Hi Andijvie, Dutch I presume? ;-) The green stuff is something from the dental industry, called contact spray.

vandoorenniels Ok, een stuk wijzer geworden van al die mooie videos van jullie.

It you message me directly I can provide price details.

where can i find you?? Do you have a facebook or instagram p age???

info@vandoorendiamonds.com FB and Instagram: vandoorendiamonds =)

vandoorenniels how much is it for you to make me one of those

darlene robinson please email me at info@vandoorendiamonds.com for detailed information.

Hi Cherry, what do you mean with a compass? Or email me at info@vandoorendiamonds.com

That equipment you used first sir , to draw a line on the gold and mark it where you sit the diamond sir.

cherry ann hayahay aha ! Now I understand what you mean. We call this a divider. Juratools makes and sells these. Make sure to mention me when you order ;-)

@@heinikendude they have a site shop ? Im far , im from phillipines sir. Can you help me where can i order it ? Send me a link sir please , and ofcourse i will mention you sir , you helped me :)

Would be possible but the amount of time spent would not make sense to do this with CZ

It's a dental spray I use to detect the place where the metal hits the gem/diamond.

Would you be so kind to let us know what is the black powder that you use in 22:00 minute of the video? Thank you in advance!

Enyo Burov is just the leftover of the abrasive silicone wheel.:-)

David-Alexandre Montminy occlusion spray is the right name of the green stuff, if you are looking for.

This is a big prong pusher that I wet a bit with a sponge ;-)

@@heinikendude thanks

@@heinikendude I want to learn how to do gem setting and your videos help out a lot.

@@heinikendude what is the very first tool called i cant find it for the life of me

Hi liza, I tend to use dental spray when there is a very large stone which doesn't fit in to good. I can determine the remaining contact points and remove these with a drill

Hala Istifan thanks voor je comment !

Thank you very much for your nice words !

@@heinikendude Please check your inbox. I sent a message via your website. I hope to hear from you or your office soon. Thank you

Hi Durmus, can you please type in english, french, spanish, german or dutch? ;)

Hi, This is a piece of iron with a hollowed tip dipped in water.

Hi Ann, It's hard sometimes to focus on the diamond setting and the camera work. But i'll keep it in mind ! ;-)

Did you really just say that he needs better camera work on a microscope camera? Get a life. His camera work and jewelry work is perfectly fine.

Thanks

Gracias Jairo!

NiNoLiberté Fioz yes we do! However we need a lot of gold shavings for the next ring ;-)

Samir Namosa hi, you can contact me via info@vandoorendiamonds.com

English? ;-)

@@heinikendude he's asking why u didn't polish setting spaces, sorry I'm not even jeweller, was just watching ur amazing work)

Billy Nage hi, a good hot ultrasonic with some grease dissolver will clean everything. At least in my humble opinion. If not use a steamer or pressed air.

Hola Ricardo, utiliza un buril tipo carbide steel

AMELO 100 except from the center stone yes, all VVS. Center-stone was from customers old ring. :-)

Gracias

zappa duck let’s agree to disagree.

You can mute it ;-)

Thanks for your comment ;-)

Juan Garcia it’s my passion and everything but boring to me. Sorry that you found it boring