Midas M32 Vs Behringer X32 Sonic Differences (Public)

Подписаться 84 тыс.

Просмотров 207 тыс.

50% 1

Null and noise tests on the Behringer X32 vs Midas M32 with pink noise and music.
Music:
Band : Riarosa
Song: Better Than Nothing
Produced by: J.T. O’Neal
Mixed by : Brian Edwards
Mastered: Voyager Mastering
• Riarosa - Better Than ...
/ @riarosa6083
open.spotify.com/track/2GFUih...
riarosaband?igs...
If you like this and other videos I do, please join this channel to get access to more videos, early access to videos as well as to be able to join my weekly zoom chats:
/ @daverat
#1 Behringer X32 Compare Digital vs Analog Metering & Output Levels
Members - • Behringer X32 Compare ...
Public - • Behringer X32 Digital ...
#2 Midas M32 Vs Behringer X32 Sonic Differences
Members - • Comparing Midas M32 an...
Public - • Midas M32 Vs Behringer...
#3 Midas M32 vs Behringer X32 mic pre noise comparisons
Members - • Midas M32 vs Behringer...
Public - • Midas M32 vs Behringer...
#4 Midas M32 vs Behringer X32 LF Overload and Muting
Members - • Midas M32 vs Behringer...
Public - • Behringer X32 Vs Midas...
#5 X32 vs M32 Preamp Noise & Gain vs Trim
Members - • X32 vs M32 Preamp Nois...
Public - • X32 vs M32 vs Xenyx No...
#6 X32/M32 AES50 Latency and Chat
Members - • X32/M32 AES50 Latency ...
#7 X32/M32 AES50 Cable Type and Length
Members - • X32/M32 AES50 Cable Ty...
#8 Midas Behringer X32/M32 Digital Dreams of Being a Short Copper Wire
Members - • Copper Wire vs Midas M...
#9 X32/M32 Fader and Mute Pings
Members - • Behringer X32 Midas M3...
#10 X32/M32 Scoping and Loading the Outputs +26
Members - • Scoping & Loading Down...
#11 X32 vs QU32 Metering, clip and max output
Editing
#1 Behringer X32 Compare Digital vs Analog Metering & Output Levels
Members - • Behringer X32 Compare ...
Public - • Behringer X32 Digital ...
#2 Midas M32 Vs Behringer X32 Sonic Differences
Members - • Comparing Midas M32 an...
Public - • Midas M32 Vs Behringer...
#3 Midas M32 vs Behringer X32 mic pre noise comparisons
Members - • Midas M32 vs Behringer...
#4 Midas M32 vs Behringer X32 LF Overload and Muting
Members - • Midas M32 vs Behringer...
#5 X32 vs M32 Preamp Noise & Gain vs Trim
Members - • X32 vs M32 Preamp Nois...
#6 X32/M32 AES50 Latency and Chat
Members - • X32/M32 AES50 Latency ...
#7 X32/M32 AES50 Cable Type and Length
Members - • X32/M32 AES50 Cable Ty...
#8 X32/M32 Square Wave and Analog Dreams
Done, Not yet released
#9 X32/M32 Fader and Mute Pings
Editing, Not yet released
#10 X32/M32 Scoping the Outputs
Next to Edit, Not yet released
Also check out:
www.ratsoundsales.com/
ratsound.com/daveswordpress/
www.ratsound.com/
www.soundtools.com
00:00 Intro
02:24 Connector differences
03:24 Gear setup
04:17 Sound sources and connections
05:32 Null tests
08:40 M32 clipping
09:28 Clipping X32
10:20 Background noise compare
11:23 Expectations vs tests
12:27 Music null below clip compare
15:21 Music null M32 against X32
17:06 Source of hiss
18:18 Output noise compare
19:14 Compare specs
22:40 Outro

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 940

@nathanieleck6821 2 года назад

This is one of those videos the entire audio community wanted to know the answers to, thanks for taking the time to explain it well! I've used both consoles many times, I tell people who are interested in them that the major difference outside of audio processing quality is physical build and long term use, but to now see what really is going on with the preamps really helps me understand just how much more they are different than I thought on the audio quality side of the console.

@DaveRat 2 года назад

👍 cool cool and there are at least 7 more videos on these boards I have already done on the member side. Will release some or most to the public over the next few months

@NoiseMakerX 2 года назад

@Nathaniel Eck: If you've used both X32 and M32 extensively but still needed this video to find any differences in the audio, does it make any practical difference?

@DaveRat 2 года назад

Hmmm, when I buy gear, and I (rat sound) owns loads of gear, like 6 arena systems worth, we look at many factors. Sound quality, durability, warranty, factory support, cost, rental rate, return on investment, resale value, demand, brand reputation, predictive life span of the product, ease of use, repairability, parts availability, country of manufacture and so on. There are many factors and the prioritization of those factors change based on application. And have changed over the years as our company grew from some speakers in my living room to being an international touring Sound company. I have been on all levels and am mainly trying to highlight aspects so people can prioritize aspects for their application

@drearphones Год назад

So you cannot hear anything off when you are using one versus the other?

@drearphones Год назад

And if you can't, then what difference does it make, and who cares?

@UOttawaScotty 2 года назад

This is my favorite RU-vid channel, amazing video Dave as always ! Love your no anecdotal, hard evidence approach to pro audio.

@DaveRat 2 года назад

Awesome and thank you Scotty!

@WNicholasHreczny 2 года назад

I’ve been waiting for a video like this. Really great dave thank you!

@DaveRat 2 года назад

Awesome and thank you Nick!

@cheesy6516 2 года назад

Everything you do and say is over my head, but love seeing you test audio gear. I’ve learned a lot and still have a lot to learn. Thanks Dave.

@DaveRat 2 года назад

Great to meet you Dave!

@telefunkian 2 года назад

Well I have just discovered this channel and I am super impressed! Great presentation, production and useful, no nonsense content that people can actually use to make decisions about gear to use and how to use it. My compliments Mr. Rat! Well done!

@DaveRat 2 года назад

Awesome and thank you!

@techtinkertrain8443 2 года назад

I thoroughly enjoyed this video and testing. I was a Navy Electronics Tech who lived with test equipment and dabbled in sound reinforcement. The way you tested the consoles was almost exactly how I would troubleshoot pseudo-random signals. Made. My. Day. Thank you.

@DaveRat 2 года назад

Awesome! Thank you and I used to test military gear when I was 18. Great to meet ya

@mischastiefenhofer 2 года назад

I love dave's passion. He is able to motivate me to dive deeper into the neardy stuff of audio

@DaveRat 2 года назад

Hell yes!!

@VapidVulpes 2 года назад

yaaasssssss I'm so stoked to see you do a deep dive on this exact comparison!!

@DaveRat 2 года назад

Thank you Lock!

@user-co7js5tj9n 2 года назад

Thank you very much! Such a pleasure to see a man so curious as a child but a great professional!

@DaveRat 2 года назад

Thank you!!

@bazreznik 2 года назад

Great testing video's again. I really love the simplicity of the tests that are actually telling you a lot. In this streaming age I was "forced" to use more digital consoles and the M32 and X32 are the most used. I'm actually crazy enough more found of the x32 because the buttons and faders are lighter. This seems weird cause it would make it less durable but if you only use it for video streams that doesn't matter, what does matter is that it makes the console quicker since the buttons are less heavy to push and the faders are quicker in position. As said in another comment: you can hook up the m32 stagebox over the AES50 and you'll have the other preamps. Looking forward to the other test video's in this lockdown age here in the Netherlands.

@DaveRat 2 года назад

Super cool and thank you! I love nuances like the lighter button aspect where real world function for the application is embraced over everything else.

@bazreznik 2 года назад

@@DaveRat I mixed on tons of different mixers in theatre, band, festival, club and now livestream applications and if there’s one thing I learned it’s that the job and the application decide which mixer is best :)

@DaveRat 2 года назад

👍

@TehSyneS 2 года назад

Thanks for the inspiration Dave! Super useful video as always.

@DaveRat 2 года назад

👍

@isettech 2 года назад

On the secondary market, was able to pick up a Midas M32R. Thanks for the review. I knew the pre-amps were different, but nice to hear it and get confirmation in an actual test.

@DaveRat 2 года назад

🤙🤙🤙

@pvanb291 2 года назад

Hey Dave, I know of two venues that had upgraded their X32 to the M32 desk. I was always curious to know how much of a difference there really is between them. Your real world tests were great!

@DaveRat 2 года назад

Thank you Peter!

@BrettGilbertLightguy48 2 года назад

Having had an X32 open a few times I would say the noise floor issues are lack of isolation / shielding from the digital components and that digital noise is being induced/picked up by the output devices. There is virtually no shielding / isolation of various sections within the case Any interesting feature of the X/M 32 is the floating point processing, once an audio signal has been converted into the digital domain within the console the potential gain structure is basically infinite. I tested this one time using some Potomac audio generators, analyzers, and a scope. As long as you don't clip the A/D you can i.e. keep cranking up the buses, DCA's, effects, etc. and as long as it's then brought back down to a normal level so you don't clip the D/A converter it won't distort. So as an example if you see your GEQ clipping but you've brought your bus master or LR master back down where it's not clipping on the output meter the signal will remain clean and unclipped due to the floating point processing. I did notice some 'twisting' of certain signals when severely overdriving some of the effects plug-ins so it's possible that some of those don't use the same floating point processing that the main console busses do.

@FallenStarFeatures 2 года назад

The X32's primary selling point has always been its cut-rate price. Who would doubt Behringer's cost-cutting fervor extends down through cheap components to negligence of RFI shielding? Having run both X32 and M32 boards at dozens of live shows, I can confirm this video's findings of X32 excess noise floor and likewise both consoles' crappy channel overload behavior. Honestly, what do you expect in terms of sound quality from Behringer other than absence of anything to complain about? If it's the British sound you want, stick with Soundcraft or Allen & Heath.

@DaveRat 2 года назад

In another video I look at differences in the preamp noise and sound of that noise.

@gregmcveigh9966 2 года назад

Another great video. Thanks, Dave.

@DaveRat 2 года назад

Thank you Greg!

@okaudiopro7613 2 года назад

Excellent video, thanks for taking the time and sharing Mr. Rat….you rock!!

@DaveRat 2 года назад

👍

@COGSCNY 2 года назад

As an audio tech I love knowing through testing the real differences in consoles but at the end of the day there are soo many things that go into the final sound product like PA and mic choice, position, room, the list goes on that I worry less about sound floor and more about user experience. Having said that however, I love these kind vids please continue to do more. P.S. just got a new sniffer sender from you arriving in the mail today excited to use it.

@DaveRat 2 года назад

Thank you! And more to come!

@daveburgess2126 2 года назад

Thank you for such a cogent and unbiased demonstration, Onya!!

@DaveRat 2 года назад

Thank you Dave

@wilcandou 2 года назад

I've had the M32 for a couple years now... Glad I did. Very good synopsis Mr Rat. Well done!

@DaveRat 2 года назад

👍

@ShadeHope1969 2 года назад

Thanx Dave. always confirming or debunking what is. love it. great info always,

@DaveRat 2 года назад

👍

@djtecthreat 2 года назад

Dave, thanks for doing this. Can you see what the noise from each console looks like bypassing the analog outputs? This could be a more isolated listen to the mic-pre differences. Maybe use the USB interface to record to a PC, or a Dante card. You could also link them over AES50 and essentially route the X32 pres to the M32 outs and see what it sounds like.

@chickenfizz 2 года назад

A test over AES50 would be interesting but there is a latency penalty on an AES50 link (admittedly only a few samples) so 3 consoles would be required to do a sample-accurate null test. The consoles in the video should really have been clocked from the same source too but that wouldn't make any difference to the noise performance.

@DaveRat 2 года назад

I have done 8 videos on the M/X32 so far and 7 are up on the member side already. I do measure AES50 latency as well as cover mic preamp noise. The noise in this video was with the outputs muted, so mic pre noise is not a factor

@djjazzyjeff1232 2 года назад

That difference in the spec sheets is interesting. It reminds me of an old adage, "Statistics never lie, but liars use statistics."

@DaveRat 2 года назад

Agreed. I really dont like deceptive specs

@audiolego 2 года назад

Like audio interface companies

@DaveRat 2 года назад

👍

@k.d.barrthedoor6092 2 года назад

Dave, you have excellent teaching skills. Can't wait to watch more of your videos.

@DaveRat 2 года назад

Thank you K D!

@ryremusic 2 года назад

That was the best thing I've seen on RU-vid in ages!

@DaveRat 2 года назад

Thank you Ryan!

@fublebubbles 2 года назад

I personally use an X32 with the Midas DL32 stage box, and noticed the noise floor difference when switching from the local preamps, to the stage box preamps. nice to see it confirmed! I have used both consoles extensively in live settings, and don't really notice a sonic difference at all. aside from ergonomics, I dont find much at all of a "real world" difference between them

@bevrek 2 года назад

When I changed the cross-over on our rig, the difference was astounding. When we went from an x23 to an M32, no difference.

@ExaviorMusic 2 года назад

Yeah, I'd like to know if the noise on the X32 goes away when you use the DL32 as the outputs. It felt like the DL32 drastically improved the sound of my X32 Rack when I started using it, but I've not got the time to test properly!

@mrufino1 2 года назад

@@ExaviorMusic when I had my x32rack/ DL16 setup I definitely noticed a difference using the Midas branded preamps and outputs over the behringer branded ones. It definitely was not confirmation bias, as the x32 ones were fine. They most definitely would not ruin a show. The Midas was a subtle but not so subtle difference if that makes any sense. I can most definitely say that if you can’t mix a good sounding show on an x32 or m32, provided the bussing, matrices, channel counts, etc meet the needs of the show, then it’s not the board that’s the issue.

@chickenfizz 2 года назад

except the noise floor of the preamps isn't where the difference is, it's certainly negligible with any real-world source. The difference in noise is in the outputs, not the inputs. I also have a pro series stage box (dl152) and have A-B'ed them extensively.

@DaveRat 2 года назад

that seems pretty consistent with with the tests so far

@Oisin.Clarke 2 года назад

Thank my dude for the videos! Can you PLEASE do a video on WEDGES!! Ringing them out, mixing them from foh, do you y split vocals for wedges…. Would learn a lot from that, thanks man big love

@DaveRat 2 года назад

I will work on a plan for that. If I can figure out a way to demo it on a small scale from where I do the vids, I will do it sooner.

@sonicinsights 2 года назад

Yes would love this!! Thanks!

@Oisin.Clarke 2 года назад

Vocals in the wedge in the most important thing when mixing a gig, would love to know the approach form Dave who's seen it all! Solo, get the channel eq for the vocalist in the headphones first then ring out on the graphic I guess, then some general tips? I want to hear it all....

@Oisin.Clarke 2 года назад

@@DaveRat Legend my man, hit me when you're in Ireland and I'll hook you up in return... if you need an assistant for the Chillis gig next summer you know where to find me, I might even be working there that day depending on the company who knows

@carlstockmal 2 года назад

Get rid of the wedges... nobody should be riding a horse to work any more.

@harrissoundlighting 2 года назад

Never been a fan of either console, but I found this very interesting. Amazing job as always!

@DaveRat 2 года назад

Agreed and thank you!

@jeffcarricoguitar 2 года назад

Thank you so much for what you do Dave.

@DaveRat 2 года назад

👍👍👍

@swensonkearey6447 2 года назад

Hi Dave. Interesting set of tests. You've assumed that the analogue input stage is identical on ch1 and ch9. I'd wager that the tolerances in components in this stage is having more effect on the null than the 'colour' until clip. The x32 is known for having cheaper brand, wider tolerance components in its analogue stage, so whilst it is still of midas design, channel to channel, desk to desk there is much wider variation in real world specs in this stage. The same is true (if not more so) for the xenyx you are using to sum the two consoles. The noise floor is however very interesting. I bought the midas for the difference in faders alone. Keep making these videos there are so many concepts you used in this one that teach students things they'd never concider.

@DaveRat 2 года назад

I did tests where I compared nulling two channels that were digitally split vs two channels that were driven by an analog Y and definitely the analog Y does not null as well on either console. But the analog Y nulls similarly on both consoles

@Pinkybum 2 года назад

This doesn't make sense he nulled both channels which should take account of variations in component tolerances it is why the null test is useful.

@DaveRat 2 года назад

👍

@douglasallen534 2 года назад

Nice. I noticed this was a single channel measurement. Will the relative level of this noise difference remain the same with 1 channel on each board being used or all 32 channels on the boards being used at the same time? I was just wondering about the Preamp power supply.

@DaveRat 2 года назад

Hmmm, more videos coming, there are 6 or 7 more on the member side of my YT channel currently. I will make some or most public at some point

@Gem-Ex 2 года назад

Thanks man, love your videos & personality :)

@DaveRat 2 года назад

Thank you!

@Jojo.255 2 года назад

YES! Been waiting for this

@DaveRat 2 года назад

👍

@mastablasta9x 2 года назад

YOU ROCK DUDE! Thank you so much! I'm just in the process of deciding which one to buy for my band and that helps a lot. I'm wondering if I can conclude that they don't actually sound that different?

@DaveRat 2 года назад

I have done 8 videos comparing these so far and released 7 of them on the member side of my RU-vid. Eventually most of the vids will make it to the publis side but may be worth spending the $5 and watching them now, then canceling your membership. :)

@mastablasta9x 2 года назад

@@DaveRat I'm singing up 100% :)

@DaveRat 2 года назад

Cool cool and welcome! I also do a video zoom chat every few weeks or so for the channel members. Maybe see ya there?

@mastablasta9x 2 года назад

@@DaveRat that's awesome! I definitely plan to join zoom. I would love if it would be around the same time as last call (2pm Pacific), because I'm from Poland and it would be 10pm here, see you! :)

@DaveRat 2 года назад

👍

@DavideGuerri 2 года назад

i toured both with the X32 and the M32, same band, same microphones, different PAs but often similar setups, i saved the scene from the X32 and loaded in on the M32 for the next leg of the tour, i immediately noticed more depth and roundness in the low end and a better transient response from the M32. i might be biased but i had the same response from other people who did the same

@DaveRat 2 года назад

Interesting. I have not found any clear sonic differences, only slight so far. But there are some differences.

@irrellevents 2 года назад

I've done it blind with a single mic into 1 channel of each, and at least at -10db or so with, the m32 is much cleaner and less distorted. X32 may fare better at lower gain levels or input levels, didn't play around that much...

@andrewkirschman7087 2 года назад

Loved this video, as with many others on your channel. Greatful for your time and willingness to share your knowledge. Quite curious if these outcomes would be similar when using the corresponding digital stage boxes. 🤔

@DaveRat 2 года назад

Doing tests with the m32 as the stagebox for the m32 and testing the AES50 as well

@sw1ne2001 Год назад

the end test tones and sweeps suddenly highlighted where I need to work on my rooms bass management, cheers!

@DaveRat 11 месяцев назад

🤙👍🤙

@CMSoundUK 2 года назад

Hi Dave, I really appreciate this video a flat demonstration of the difference between the two. I’m a user of the Pro series console from Midas, I recently did a gig where I approached the M32 as I would the Pro series. The example here being driving the mic pre hard then attenuating the digital gain control to back off the AD converters. Wrongly i suppose I relate the input back to mixing on a heritage 2000 where a turn up and a high pass the source signal sounds mighty! Maybe an unrealistic expectation, however I have managed to get an input to sound as near as possible to this console on a Pro 2, different guitarist, input source and so on.. but a good gain, a high pass and there it was!I appreciate that the processes are vastly different but! I wondered from your opinion, given the historic, iconic maybe tonality of the pre Amps that state Pro pre amps in the M32 match the build quality of the original Pro pre amps? In my opinion it feels cheap, no character, no colour, no real personality.. I don’t want to appear to be bashing a brand here, as long as a channel has gain, EQ, and insert point and most importantly the source is good. It’s all good, we make it happen. But I guess my questions at it’s root is - regardless of the potential implications of the music group, is the M32 worthy in your opinion of describing the console as have pro series Pres accurate.? I have heard good things on the Heritage D I would like to see the a comparison from that to! A pro series console. Big fan Dave, learnt a lot from your videos and appreciate your no bill shit approach, thanks man! Much love

@DaveRat 2 года назад

Ya know, I don't really know. I mixed for many years on a H3000 and these definitely don't sound or feel like that console. That said, I will test with a dl251 and see how that goes. Also my friend has an h3000nin his spare room and will try and test compare to that at some point

@iamjohnnytrox 2 года назад

First off, having toured the world doing 300+ shows with m32's and x32's in clubs to stadiums, I have to say, I love this video series you are doing. Have you tried an M32 vs another m32 or an x32 vs another x32? I am curious if some of the difference could just be from consistency in build quality from one console to the next. Also, are they running the same firmware? It probably doesn't make a difference, but I am just curious. Finally, I'd be curious for you to test one stage box and switching it from the x32 to m32 and seeing if the processing and output noise make a difference. I tried that at the Rave in Milwaukee one time for a band because we were curious if the processing sounded different. No one in the room could notice a difference, however we were listening at high volumes and not really listening for a slightly higher noise floor.

@DaveRat 2 года назад

I have only tested these two and the M32 is 4 or 5 years old and the X32 is new with in the last few months. Software is the same. A lot of the direction I head is based on myth busting and clarifying confusions. I have done 10 XM32 comparison vids and am done with that side of things. Now doing X32 to QU16 for 2 or 3 vids and then X32 to SD11. Will see where that takes me.

@JasonFerguson1283 2 года назад

The boards are so clean and lean looking! Great video!

@DaveRat 2 года назад

👍

@musicsurfandrats 2 года назад

Nice one Dave, keep them coming!

@DaveRat 2 года назад

Cool cool, thank you and will do

@andyberg9731 2 года назад

I’d like to see you do the cancellation/preamp additive test between an M32 and an actual Midas Pro series console, pre Behringer buyout.

@DaveRat 2 года назад

I will grab a DL251 and link that as a stagebox at some point. That should give us the other Midas preamp sound

@lcsper 2 года назад

That will never work even with two exact consoles. Analog doesn't ever sound exactly the same. A qualitative test is more relevant.

@DaveRat 2 года назад

👍

@TuffEnuffIII 2 года назад

DAVE - PLEASE make a video about doing "Sound in the round" ... where the audience is 360 degrees around the stage. Also, id love to see how you calculate time alignment

@mrufino1 2 года назад

That would be cool! I had to do it for the first time last week and will again this coming Friday, and we made it work, but I’d be interested in being able to really set it up better.

@DaveRat 2 года назад

I will ponder that adventure

@MichaelJohnson-ej8hi 2 года назад

@@DaveRat Talk to Jason Jon Anderson who did it for my team at Eaux Claires and for Bon Iver. I'm sure he'd love to do a Zoom chat or something. He's possibly one of the nicest guys in America.

@DaveRat 2 года назад

I did cover some in the round stuff in a video about designing the system for a Bassnectar 360 gig where I did some really cool subwoofer stuff. The video is member's only and I don't see releasing it public though

@TuffEnuffIII 2 года назад

@@DaveRat Maybe a basic "how to calculate time alignment" ? I find the my Smaart program is almost always inaccurate and have learned how to do it by ear. I have also tried recording a click track to use as a visual aid when trying to time align a woofer to a horn.

@T-H-X 2 года назад

Really great test. thx man

@DaveRat 2 года назад

👍

@adamgreene8407 2 года назад

Thank you The sound company I work for we have a M32 and x32 as well as a x32 compact and it is awesome to see the difference or lack of the differences between them I will say I do enjoy getting around the M32 lil bit better !

@DaveRat 2 года назад

👍

@deniselias5405 2 года назад

Thats a really good video! But for the noise test, or in generell, having a XENYX at the end kills the whole test. I found even in one unit big differences

@DaveRat 2 года назад

I did bunch more videos and tests with and without the xenyx. That I will release over the next few months

@sea-ferring Год назад

I doesn't matter what he has at the end because it is the same for both devices, unless what you are saying is that the inputs on the Xenyx are so wildly out of spec that it makes the comparison invalid. Chinese mass production of electronic components is not great for audio, but you tend to see the difference in terms of useful life more than audible tolerances.

@DaveRat Год назад

Yes, and also the Xenyx tests better than the x32 with lower noise, higher output and wider freq response

@johnschalk1271 2 года назад

A couple of comments on some practical differences in these two consoles. First, while the Midas does cost more, it comes with a 10 year warranty versus 3 years for the Behringer. Second, Dave mentions the angle of the screen on the Midas as a positive feature but that is only true, for me at least, if you are seated when you're mixing. If you are standing at the consoles, then the Behringer's screen is at a better angle for viewing. I'm 6' 3" and I have to dip my head to get a good view of the Midas' display when I'm standing.

@DaveRat 2 года назад

👍👍

@davidgeorge1294 2 года назад

You get what you pay for.

@johnschalk1271 2 года назад

I just learned that Music Tribe has reduced the warranty period for the M32 to 3 years from 10, and that it is not transferable. I believe this change took effect last month. I specifically checked the warranty for the M32 Live, but the wording leads me to believe that the warranty period is now 3 years for all Midas products.

@DaveRat 2 года назад

Lame

@RichardCowdrey 2 года назад

Informative AND entertaining! Well done.

@DaveRat 2 года назад

Awesome thank you!

@precisionsoundworksstudio 2 года назад

Not sure how I get here, but I am very glad to have found your channel. Just subscribed. 😎👍🏻

@DaveRat 2 года назад

Cool cool and welcome!

@SpaceSquid420 2 года назад

Hey have you given the schematics for both a look? They are very telling, pres look very similar with better components in the m32 bom and probably an updated pcb layout to make room for better caps and stuff. The m32 uses better ADCs and DACs with better noise floors I've always suspected that most of the difference between the two was actually the change to those ADC/DACs especially when people bring up the hiss in the noise floor.

@mrufino1 2 года назад

I’ve seen pictures of the preamps online, and they’re definitely a difference in design and construction. It’s not just the same design with better parts. But, they both sound good, with the Midas, to my ears, just slightly more flattering, where I felt that I could do less to channels to get them to sit in the mix. But I used an x32 rack with Midas DL16 stage box and there definitely was not a super drastic difference between them. I tend to be conservative with gains though, so I didn’t really slam either one.

@DaveRat 2 года назад

I have seen pics of the differences but really, what does it matter if more expensive and pretty arts are inside if they make no difference? I guess what I am after is "what are the real world audio differences, can they be heard and what do they sound like"

@mrufino1 2 года назад

Clarifying my comment- they look like different preamp designs, rather than the same preamp design where one just uses higher quality parts than the other. But sonically, they wind up in a similar place. When I bought my Midas stage box, for some reason it actually wound up being cheaper than the equivalent behringer one (DL16 vs S16). In using it on many gigs, I definitely heard the Midas as fuller and more pleasant, but once everyone started playing or speaking, the differences became less noticeable. Just speaking on the preamps themselves, not things like noise. At the time I got my X32 setup, I was mainly using an m7cl, soundcraft expression, or qsc mixers and hadn’t really gotten to use much else. Once I had a chance to use DiGiCo or newer yamaha, I clearly heard the difference between the Midas setup and those. Still, I’d take the X32 over a soundcraft expression any day. The expression sounds pretty good, but I really really dislike the workflow. No matter what, I’m happy we have choices, and with the X32 being relatively affordable it’s good to have a tool like that. I do generally like the x/m32 workflow, although the DiGiCo workflow is my favorite of anything I’ve been able to use. Thanks for this video, it was informative.

@DaveRat 2 года назад

👍👍👍

@SpaceSquid420 2 года назад

@@mrufino1 @Mark Rufino Visual differences don't mean much. The component changes in the bom would require a redesign of the pcb layout so components won't Visually match. I guess the point I was trying to bring up was just the m series pre seems like they took the X looked up better rated components on mouser spun a new pcb and went ok done And when you look at say a pro series schematic it's significantly different. It's also interesting to see what specs they pull from those chips data sheets because of the weighting choices.

@tjeugeelen4167 2 года назад

Canceling out can be effected by fader resolution: The high driven low fader position probably makes 1 db steps and the high fader position can have lower resolution The results might be different when you use the high fader to match cancellation...

@DaveRat 2 года назад

The fader steps are shown in db on the screen and can be matched. So either the screen readout is inaccurate or there is a differential. At lower gains with the inputs digitally linked I can get perfect or near perfect cancellation of one signal run through a subgroup to mix against another signal run straight to mix, as long as I stay low on the meters

@phoenixmediaforge 2 года назад

Both consoles work in .3 dB increments. You can view the channel screen and use an encoder to set the level very accurately.

@DaveRat 2 года назад

👍

@AndiusPandius 2 года назад

How about another test, use an external analog pot on the input to the phase inverted channel as a trim to achieve the null? Thus removing the discrete digital steps in attenuation/gain of the consoles. That null sweet spot should be able to be found exactly this way revealing the "real" differences without any due to gain mismatch.

@DaveRat 2 года назад

With a digital split, the null is perfect between channels. Testing various path nulls. Thee are 8 other videos up already on the member side of my RU-vid. I will release more to the public over the next few months

@mr.gsuperman4385 2 года назад

Great video Dave! Thank you!

@DaveRat 2 года назад

Thank You Mr. G Superman

@JuusoHoo Год назад

delightful knowledge you have, thanks!

@DaveRat Год назад

👍🤙👍

@steventurner1628 2 года назад

Hi Dave, would love to see you do something similar with the Behringer wing. Would love to see the input/review from a pro like you on that board.

@DaveRat 2 года назад

Maybe at some point

@Str34mR 2 года назад

Hi! I wonder if what you refer to as phase / timing difference during the null test could simply be caused by a clock skew between the two consoles? I suppose they aren't synced up in some way of course. I would expect that kind of high frequency output on a null test for a simple clock skew that even two identical consoles will actually have. I may be wrong of course, I'm in no way an expert in that matter.

@NealMiskinMusic 2 года назад

Yeah good call, sync them both to a master clock, that would eliminate jitter as a culprit.

@ewsclass6679 2 года назад

Just connect the 2 consoles via AES50 and set one to master and other to use the AES50 clock

@DaveRat 2 года назад

Since I am running analog into and out of both consoles, there is no impact of clocking them together. Using AES50 will add latency to the signal passing through the AES50. The two consoles do have slightly differing latencies inherent. I show the AES50 latency and differing console latencies in videos 7 and/or 8 of the series. I believe I am up to video 7 posted on the member side of my YT channel

@Str34mR 2 года назад

@@DaveRat I disagree on your claim that there is no impact, what I'm not sure is if the impact is high enough to get on frequencies as low as what we heard on the null test. According to the specs these consoles sample at 44.1kHz/48kHz, which is probably low enough that if the two consoles aren't synced in some way, would introduce a skew which could impact higher frequencies. According to my theory you could even reboot the consoles and get different measurements. Unfortunately I have no way to test my claims so it may be complete BS. Trying the experiment on two identical consoles (including software version-wise) would be a good way to validate if there is actually an impact or not? I appreciate your content, thanks for your work!

@DaveRat 2 года назад

Hmmm, so you are saying the latency of of the consoles drifts a substantial enough time to have an impact on the nulls? The actual latency of the consoles are different between the x and m. I think like 50 microseconds or so. Though I don't see any measurable drift between them.

@topa1798 2 года назад

Thank you Dave, you"ve been very helpful

@DaveRat 2 года назад

👍

@D_in_DC 2 года назад

Very interesting comparison. Thanks for sharing.

@DaveRat 2 года назад

👍👍

@GuillaumeLortie 2 года назад

Hi Dave! I would be curious to hear many channels form one console together in a test. how is everything is reacting at the summing point where all the signal meeting. is it possible that the X32 do like the old M7CL did and leave some information behind at the summing point? I would be also interested to know what really is the parts tolerance in the M VS X. apparently the mic preamps are the same physical design with more affordable components. is it possible that 2 of the same console would have large difference in sound?

@DaveRat 2 года назад

A friend sent me pics of the Midas vs the Behringer stage box circuit boards and they were quite different in components, layout and even the quality of the circuit board itself. I h will look into opening these up and looking inside as well.

@GuillaumeLortie 2 года назад

@@DaveRat if you investigate this, can you do the 3 different versions of stagebox available? DL32, DL251,S32? I personally use the Blue box all the time as an upgrade form the DL32 and i believe had heard a difference between the 2 when I switch

@DaveRat 2 года назад

I will try and grab and test a DL251 from the Rat shop. As far as the others, just using one console as the stage box for the other should suffice

@artysanmobile 2 года назад

I’ve used both in similar live show modes, and think they each sound pretty good. Though not in the market for this size console, if I were, the Midas physical layout, the tilt of its upper housing would be a must for me, even for $1500 extra. ‘Flat’ console surfaces are my pet peeve, as they demand long hours standing bent over the surface - the worst possible posture for a 6-10 hour day of concentration. The difference is, for me anyway, profound. My whole body starting with my ears does not appreciate that ridiculous oversight of a console designer. Imagine an expensive laptop computer whose screen will only fold 15 degrees above lying flat on the table. You’d throw that thing in the ocean. That is the X32 experience.

@DaveRat 2 года назад

Agreed, the stronger build and better layout would be worth the $. That said, as a Rental company we do not own any of either except what I bought to do the video.

@connshawnery6489 2 года назад

The Behringer X32 was actually a Midas product, as it was in the can already when they were acquired by Behringer. The reason for the low competitive price point is technical, because when Behringer bought Midas they were in financial distress, had already invested in all the research and development for this product (among others), which freed Behringer from having to build in this into the cost in order to see the return on investment. The fact that Behringer purchased a struggling brand with existing intellectual property and didn’t have to expend any resources to invent it, left them only with manufacturing costs for them to be produced, then relying on their distribution partners to supply the retailers afterwards.

@DaveRat 2 года назад

It's kind of like buying Nike knock offs with a Chinese label on it that is made in the same factory as Nike. Similar shoe, maybe some cheaper materials, different branding but they both fit your foot and can run in them. People just need to decide if the brand name and improved build quality matters for their foot, their image and their preferences.

@artysanmobile 2 года назад

@@connshawnery6489 If all of that is true, then Behringer made a mighty and successful effort to screw up this slam-bang sure thing because they are as different as chalk and cheese. In either guise, it’s a frustrating experience to use this console which, on paper, seems awesome. I don’t recall any of that disappointment with the Pro 2. That the difference comes down to software design is the reason for my frustration. It’s a smaller console than I need, but that’s no excuse to make it ‘stupid’.

@connshawnery6489 2 года назад

@@artysanmobile The format and configuration of the portable ‘smart’ digital mixer was novel in those days and all aspects in fact did come from Midas at the time. This info came directly from the product manager for Behringer at the time as we worked with them as dealer for many years. Of course we are talking years ago and old cheese can certainly be considered chalk nowadays, but we recall how quickly it was adopted in the industry by both professionals and average end users alike when it first hit the market. Many may recall, it being the sliced bread of its ilk at one point in time.

@dannyharvey8245 2 года назад

This is great Dave! Thanks for taking the time to set this up! I have the x32. I use it with Behringer stage boxes, so dont use the rear pre's, I wonder if the boxes have similar noise specs! In fact, as I understand, the MIDAS spec boxes will work with the X32, so it's a way of upgrading the X32 pre's to MIDAS!

@DaveRat 2 года назад

I believe that is correct. When I used the M32 as a stage box for the X32, it had lower noise than using the X32 as a stagebox for the M32

@vestaxpmc17 2 года назад

Dave Rat, Gear Whisperer. Love this video!! I own both consoles and I was glued to the screen the whole time. Great job Dave. You are bad ass!!

@DaveRat 2 года назад

Awesome! And many more to come. Just recorded vid "9 in the series

@NealMiskinMusic 2 года назад

What an interesting expariment! This perfectly aligns with my confirmation bias. I always assumed that the X32 would have cheaper components in it and therefore probably have more nonlinearities and a higher noise floor, and that seems to be exactly what this expariment seems to show. Really though I kinda hate both of those consoles, the software UI just doesn't jive with me. I could go off on a rant, but lets just say I'll take a Yamaha any day if I can get my hands on it!

@DaveRat 2 года назад

These do a lot for the price and not enough for top pro levels.

@rdoursenaud 2 года назад

I’ve heard that the two consoles have different latencies. If that’s true, there’s no point nulling one against the other in the analog domain. I’d love to hear that test in the digital domain.

@ewsclass6679 2 года назад

Not sure if that is true as they use exactly the same CPU and FPGAs

@rdoursenaud 2 года назад

@@ewsclass6679 Can be at the ADC and DAC level if they are different. Also, same hardware architecture doesn't necessarily mean same algorithms.

@mitchellblaser9256 2 года назад

@@rdoursenaud it’s the same software so the algorithms are likely identical. The DACs introducing different latency is possible. Could also be a clock sync issue, as the chances of the two desks being aligned are very low.

@DaveRat 2 года назад

They actually do have differing latencies< i think I discover and show that in the 6th or 7th video in the series where I also show the AES50 latency. I will be posting video 8 in the series next weekend to the member side of my RU-vid channel

@Buzzgroove 2 года назад

This goes into testing way beyond my tech knowledge but totally fascinating nonetheless! The way noise level is documented is a real eye opener.

@DaveRat 2 года назад

👍👍

@pearldrumsets 2 года назад

It's about time u made this one

@DaveRat 2 года назад

👍👍👍

@phel21 2 года назад

Behringer (the company) didn't buy Midas, Music Group (now Music Tribe) did. Midas is now a subsidiary of Music Tribe, like Behringer, TurboSound, KlarkTechnik and TC Electronic are. Uli Behringer happens to be the CEO of Music Tribe, but don't mistake the person for the company. There have been collaborations between Behringer and Midas, and the X/M32 are the prime example. The two consoles have identical audio-processing hardware and software, but interfaces and A-D/D-A converters are different with much better quality on the Midas models. My experience in the past is that there would not be audible difference between the two if you use the X32 with a Midas DL16 or DL32 for I/O. There are quite a few people in the industry who prefer the X32 layout over the M32 and do just that. However, there have been minor changes to the platform over time, and this test seem to indicate that the M32 preamps no longer are no longer as good as they used to be. An older M32 I had would saturate almost like and old analog console into clipping, not producing the same nasty noise as the X32.

@Douglas-jr2pf 2 года назад

Actually Music Tribe is the Tech Support holding company. Music Group is the "parent." The impacts to near bankrupt Tannoy were to basically destroy it along with Turbosound. The companies falling in stress are KT, lake, TCE, TCH because the good is robbed and incorporated into all the other brands.

@DaveRat 2 года назад

All good info. Just for fun I typed in "who owns music tribe" And this is what came up en.m.wikipedia.org/wiki/Music_Tribe

@getsdead 2 года назад

Every M32 I can remember using has a 16k ring when the faders automate.

@DaveRat 2 года назад

Yes, I test and show that in one of the other videos. I have done 8 so far and 7 are up on the member side of my channel.

@thegravegigger891 2 года назад

Lmao Its not the tool its the fool. Pick a desk and line check. I got doors at 6pm. Haha

@DaveRat 2 года назад

I remember those days! And also remember the days when I started designing systems for arena and stadium tours 6 months before the first show. Spent 2 months in rehearsals before 2 weeks of production rehearsals before loading in 3 days before the first show. Ha! By the time we get to "doors at 6pm" we are a well oiled machine with time to burn and relaxing in catering. It's a long road between the two, a lot of work and attention to detail and striving for perfection, but the glory of the destination was goosebumps and thrilling to reach.

@randydaniels9218 2 года назад

Awesome comparison and specs are like Apples and Oranges if not measured in the same weights. It is like slew rates on amplifiers or wattage, peak, power or RMS. Dave you are the one we trust in making comparisons. Specifically real a/b tests and now we know why one has a significant price difference. Dave what is your favourite digital board for live work? Would be interested in why. Cheers for now. Looking forward to your next video.

@DaveRat 2 года назад

Thank you! As far as my favorite, personally I never really transitioned from analog but as far as the rental company, we have lots of Digico, and Avid S6L as the ones most popular. We own some Midas and Yamaha but the Digico and Avids stay the most busy for us

@sachachanyan 24 дня назад

Very helpful, useful info. Thanks! 😊

@DaveRat 19 дней назад

👍🤙👍

@really9238 Год назад

Excellent work!!

@DaveRat 11 месяцев назад

👍🤙👍

@frankangermann6460 Год назад

Dave, thank u for creating a lot of interesting content for a fairly small community….it‘s cool as hell. Thanks for some objective views on that topic! I love that!

@DaveRat Год назад

Thank you Frank!

@ThePapaKent 2 года назад

A-weighted vs. un ... these are the sort of specs most techs don't catch, or overlook, when making comparisons. Thank you for pointing this simple but too often overlooked fact. keep the classes coming, love them.

@DaveRat 2 года назад

Thank you Kent!

@tun3tym3 2 года назад

Love this dudes practical approach to audio.

@DaveRat 2 года назад

👍👍

@lorencing Месяц назад

Excellent, thank you.

@DaveRat Месяц назад

👍🤙👍

@shibishmo 2 года назад

The church I volunteer for has an X32 Compact for broadcast and an M32 for FOH. Both are used on different days. Both use their own pre amps (M32 uses a DL32, but same pre amps). To me, the difference between both is night and day. I always felt the X32 "provided" more of a hiss, and your tests proved my theory. Thanks for the vid!

@DaveRat 2 года назад

Cool cool and thank you for the info!

@uselessoldman7964 2 года назад

Really cool and interesting content Dave, good luck with your channel I own the X32 Compact which I bought at the start of the lockdowns from a Hire Company that decided to pack up, included the SD16/8 and cables. Before hand I did the research into what to buy, cost performance spec warranty (and listened to other peoples reviews and opinions) and considered various desks from Music Group. Allen Heath, Yamaha and even the QSC Touchmix. Originally I had intended to buy new but when the offer came in for the X32 it was a simple decision, jump in the car and collect !! My initial plan was to record acts live and then turn the recordings into marketable sales media as in CDs. So my priority was ease of use, portability, durability expandability performance and ease to record the multi tracks with cost subjective to the whole setup, console and extras. When you compare the X32 against the competition its a no brainer, including its half-brother the M32. They all might beat the X32 in all departments except none came close on price especially when you start expanding its capability with digital snakes. Remember these are designed to be used live not in a studio so you accept their sound quality is not comparable to studio quality, I already own hardware racked gear for that. You just cannot fault the X32 in any way its priced low for a reason, else it would be in direct competition to the Midas, they also do the Wing but that was way to big bulky and heavy. I never considered the X32 and M32 like for like. Internally they might be very similar, after all they both run the same software. You are paying a high premium for the M32, better faders Midas branded preamps and a much longer warranty but you pay for that, you pay a lot for it but in the end is it justified? I run the console into QSC RMX power amps so never need to push the output and have never heard any audible noise and the sound quality is more than acceptable. At home its also router through a RME interface with Adams Studio Monitors again no noise. My conclusion is that the X32 performs better than I expected and against much higher quality gear its surprisingly competitive. The Midas would have cost me 3 times what I paid for my X32 warranty new/old is irrelevant now since mine is over 2 years old and even if bought new the X32 is still less than half the price of a the M32 when you cost up console and snake boxes. Yes I know there is a M32 and M32R and the differences especially size and cost, I was just being lazy.

@DaveRat 2 года назад

👍👍

@jimimaze 2 года назад

Thanks for this Dave. I learned a lot.

@DaveRat 2 года назад

👍

@jimimaze 2 года назад

@@DaveRat we use the m32r at work. With "auto-mix", multi-sweep EQ and compression on every channel, it seems like a total breeze to mix compared to 20 years ago when I had a Mackie 1604 and 2 EQ on the Main and Monitor, no compression. Life is but a dream.-87 noisefloor? psssh, give me -24 and I'll give you a mix... ha ha

@DaveRat 2 года назад

Interesting. I have used none of those things

@SimonLarkin-CSRecording 2 года назад

Very interesting, thank you!

@DaveRat 2 года назад

👍

@tomigoi Год назад

Love this video and love Dave. Mischa mentioned his passion and it is dead on. I also find the video is hilarious. Will follow this channel.

@DaveRat Год назад

Hello and welcome!!

@tomigoi Год назад

@@DaveRat Thanks Dave. I was researching about the benefits of using studio preamps with live digital consoles such as the M32 and came across your videos. May I ask your thoughts on this? I also have been trying using computer plugins (like the Waves suite) as inserts from the mics before the signal hitting the console. Do you think if there are benefits in doing this?

@DaveRat Год назад

A good mic pre will gain up the mic with minimal noise and warm overload. 2 things the x32 is not great at

@Konsta87 2 года назад

First time viewer, instant subscriber. What a fantastic video.

@DaveRat 2 года назад

Awesome and thank you!!

@JohnMirandathesounddoctor Год назад

Great video. Thank you

@DaveRat Год назад

🤙👍🤙

@garlandmusic 2 года назад

Fascinating observation on the spec sheet!! My usual gripe with specs is on powered speakers -- some brands publish their LF rolloff at -3dB and some at -10dB. -10dB is pretty useless without a curve to go along with it, but it can make (for example) a given 8" speaker look like it has more low end than another make's 12".

@DaveRat 2 года назад

Agreed and actually in the same size box, an 8" could go lower than a 12", but not get near as loud. Ratio of driver size to box volume tends to impact the low freq limit. So smaller driver or bigger box can tune lower.

@michaelmotes8994 2 года назад

Awesome! Thank you!

@DaveRat 2 года назад

👍👍

@ToddWCorey1 2 года назад

Another gem, Dave! News we can use. As far as specs go, I remember my high school math teacher saying, "Figures lie, and liars figure." And so do salespeople.

@DaveRat 2 года назад

Cool cool Todd!

@ToddWCorey1 2 года назад

@@DaveRat I just love seeing honest-to-God tests rather than hearing Oh-my-God opinions...

@DaveRat 2 года назад

👍 agreed, me too!

@GillmanAudio 2 года назад

Great video , A B testing these things is really the only way to understand if something is right for you or not right for you . Thanks for the simple facts .

@DaveRat 2 года назад

👍

@reeread 2 года назад

Thank You for a detailed test

@DaveRat 2 года назад

👍👍👍

@smokemapleinc2412 2 года назад

I really enjoyed this clip thank you so much, your expertise is truly appreciated. Please consider to also do a comparison between the Allen and Heath Avantis and Midas . This is really a huge question between thousands....Im sure we will all enjoy it.Thanks

@DaveRat 2 года назад

Cool, I will look into that

@green.room.guitars 2 года назад

This is the lord's work... Cause Dave is God. Thanks for everything Dave!

@DaveRat 2 года назад

Oh my, or just a bunch o cool sound stuff

@mcpribs 4 месяца назад

Love these videos, but also…what a song from Riarosa! Love that song.

@VictorMartinez-je6jx 2 года назад

Your so bad ass…. Love your viddys. Keep it coming brother.

@DaveRat 2 года назад

👍

@linadecaseleycarloss5838 2 года назад

I used to build the Midas XL3. Very interesting & insightful video. Subscribed.

@DaveRat 2 года назад

Very cool! And cool console the xl3!

@elbeaver0 Год назад

I love that video!!!

@DaveRat Год назад

👍🤙👍

@MacNifty 2 года назад

Very interesting thanks

@DaveRat 2 года назад

👍

@kosycat1 2 года назад

Awesome video. I've always kind of wondered I've owned/own both but not at the same time to test

@DaveRat 2 года назад

👍

@papa.alfredo 2 года назад

nice video! Thank you

@DaveRat 2 года назад

👍

@peehandshihtzu 2 года назад

I wonder what the spec sheets read like before they go through the marketing department, LOL. Great video Dave, Happy Halloween! :)

@DaveRat 2 года назад

Ha!! yes, interesting

@1Aquadon 2 года назад

Thanks Dave!!

@DaveRat 2 года назад

👍

@DeadKoby 2 года назад

This sort of video gives us a great explanation of why something costs more.

@DaveRat 2 года назад

👍👍👍

@Playmanmusic 2 года назад

Great video!

@DaveRat 2 года назад

👍

@soundman1402 2 года назад

The result of your self-noise experiment reflects some of my own experience between Midas and Behringer. I briefly had a Behringer P-16M headphone mixer. I plugged headphones into it and noted a lot of hiss. Plugged the headphones into the M32R console headphone jack and it was dead silent.

@DaveRat 2 года назад

Interesting. Seems it's easier to make something 20 to 20k than it is to make it quite and 20 to 20k