No video :(

Midi Mapping in VCV Rack 1.0

Подписаться 48 тыс.

Просмотров 39 тыс.

50% 1

Want to learn Modular Synthesis? have a look here - bit.ly/learnmo...
Do you also think that reverb is life and want to share it with the world? Have a look here - omri-cohen.cre...
If you just want to buy me a coffee :) - www.buymeacoff...
Consider joining me on Patreon - / omricohen
Patching techniques and ideas that I continue updating - bit.ly/3o1Q3Sg
One would think that the new Midi mapping feature in VCV Rack 1.0 will start and end with using an external controller and mapping it to different parameters in VCV Rack, but oh boy, this is just the beginning. Midi mapping opens a whole new world of modulation and patching that was not available before. Yes, sure, you can now map your controller to almost anything in VCV, even if it has no CV input, but you can also modulate almost anything with other modules as well, even if what you want to modulate has no CV input, and you can also record and create automation and unique modulations, and again, assign them to almost anything in VCV. So in this video, I start with mapping an external controller, and then I use the Stoermelder modules that allow us to use Midi mapping to map other modules as well.
Mapping an external controller - 00:57
Mapping modules and creating automation - 10:13
Here is the final patch - patchstorage.c...
You can find the patch from the opening sequence and a couple of extra patches on my Patron page - / 28083143
Here you can find the Stoermelder modules - vcvrack.com/pl...
All about Polyphony in VCV Rack 1.0 - • Polyphony in VCV Rack 1.0
Here is what's new in 1.0 - • What's new in VCV Rack...
Consider subscribing - bit.ly/2OljOPN
You can get VCV Rack here - vcvrack.com/
Here is a list of the modules I've used :
---------------------------------------------------------
Impromptu - Clocked , Geodesics - Branes , BogAudio - Mixer, ADDR Seq, FM-OP, LLFO, ADSR , VCV - VCA, Merge, Sum , Stoermelder - uMap, CV-Map, ReMove , ML - Quantum, Shift Register , Blamsoft - XFX Wave , Valley - Plateau , Befaco - EvenVCO, Dual Attenuverter , Squinky Labs - Stairway , Audible Instruments - Braids , Alright Devices - Chronoblob2
** HERE YOU CAN FIND MY MUSIC **
Bandcamp - omricohencompo...
Spotify - open.spotify.c...
SoundCloud - / omricohencomposer
**FOLLOW ME HERE**
Website - omricohen-musi...
Patreon - / omricohen
Facebook - / omricohenmusic
Instagram - www.instagram....
Twitter - / omricohen17
Big thanks to Carbonic Acid for helping me out with creating my own blank modules! - bit.ly/2y2amXe
You can get them here - bit.ly/2PNxgJx
And Big thanks to Xavier Belmont for helping me out with the various graphics - bit.ly/2ItJQL2
/ xbimages
** HERE IS WHAT I USE **
- Computer: Intel Core i7-7700K CPU @ 4.20GHz, 4200 Mhz, 4 Cores,
8 Logical Processor(s), 32Gb RAM, NVIDIA GeForce GTX 1070
- ZOOM Recorder H6
- M-Audio Midisport Midi Interface
- Make Noise O Coast
- Behringer Neutron
- Arturia KeyStep + BeatStep Pro + DrumBrute + MicroFreak
- Midilar Midi Modules
- Intellijel 7U case
- Make Noise Morphagene
- Expert Sleepers ES-3 + ES-6
- Nektar Impact LX88+
- Focal Alpha 65 Monitors
- AKG K121Studio Headphones
- Motu UltraLite mk4 Audio Interface
- Reaper is my DAW
#vcvrack #modularsynth #eurorack #synthesis

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 159

@OmriCohen-Music 5 лет назад

Just something to keep in mind... The Stoermelder modules DO NOT require any Midi. They are based on the principle of Midi Mapping, but they actually map CV.

@vuzh 2 года назад

Now that VCV Rack 2 is out, Stoermelder has not updated their modules for it. I'm sad because after i learned this trick from you, i used it a lot. Is there a way to do this with the modules available in VCV2?

@OmriCohen-Music 2 года назад

@@vuzh Well, no, not really but you can download this collection until it reaches the library. You can find the files here - github.com/stoermelder/vcvrack-packone/releases/tag/Nightly Download the file for your system under Assets and place it in the VCV plugins folder. If you don't know where it is, you can open VCV, and under Help choose Open User Folder. Just place the file in the plugins folder there and restart VCV.

@vuzh 2 года назад

@@OmriCohen-Music Thank you Omri, and thanks for the videos, I've picked up a lot of useful stuff from watching.

@thomasswoodward 4 года назад

Googles solution...oh look it's Omri again with the answer.

@souvlak1 2 года назад

same position

@sixpiesbreakfastabound 4 года назад

Your channel is the holy grail for VCV Rack. Always have exactly what I'm looking for!

@OmriCohen-Music 4 года назад

I'm happy you enjoy my work, thank you!

@seangarland 5 лет назад

Mapping a S & H into the the sequencer steps to get random notes is exactly what I’ve been looking to do for awhile now. This solves it. Thanks!

@OmriCohen-Music 5 лет назад

Oh yes, this is lots of fun! Thanks, Sean!

@fog2 5 лет назад

Brilliant! And now we have official Omri's School, since we have homework now :)

@OmriCohen-Music 5 лет назад

Haha, yes :) Maybe I should do this more often... Cheers Eugene!

@brhrmaster 4 года назад

In this video, I finally said that along with you: ohh YES!! You are the master! Thank you so much for this class

@OmriCohen-Music 4 года назад

Cheers Bruno!

@dreadful_privation 4 года назад

"very nice..." It is such a great thing to have access to this for free, not to mention such clear documentation to explain it all. Thank you so much!

@OmriCohen-Music 4 года назад

I'm really glad you enjoyed it, thank you!

@hnatyshyn 5 лет назад

Really appreciated. So far I was procrastinating on upgrade to 1.0. I didn't take the time to look what came with it. I am upgrading right now. Thanks for the useful tips and irreproachable teaching approach.

@OmriCohen-Music 5 лет назад

Nice! You will have lots of fun :)

@luisfloresgonzalez2337 2 года назад

There's actually a way you can multiply the capability of your controller and make one simple knob to do several and totally different tasks. You just have to simply have multiple MIDI MAP modules and for each one you change the midi channel input. In this way you can map your set of knobs in channel 1 for a particular module (and oscillator for example) Then you map the same knob or set of knobs in another MIDI map module but in channel 2. Now you can switch the midi channels in your controller and voila you can multiply the number of things your controller can do. This gives a total of 16 different set of knobs since most controllers have 16 midi channels (as far as I know, I might be wrong) This would work with controllers that let you change the midi channel on the fly but it wouldn't work if your controller needs like an editor or something to change midi channel.

@OmriCohen-Music 2 года назад

Yes, totally. If you can change the Midi channel on the fly, this will work great.

@discophone_6214 5 лет назад

Oh my god! That full patch was SOOOOO beautifull! Where do you get all these ideas and so fast. I mean you do many videos in a week

@OmriCohen-Music 5 лет назад

Thank you, I'm glad you liked it :) I'm lucky that this environment inspires me...

@lulaloops2991 2 года назад

@@OmriCohen-Music I also find it very inspiring. You're micro map tutorial here, mixed with a very clear explanation of S&H had me pause the video and then jump into the rack for around 4 hours!

@OmriCohen-Music 2 года назад

@@lulaloops2991 That's great, thanks so much!

@emanuelperetti 4 года назад

i'm trying to look over all your videos....but this one is a masterclass! tonight i will map like hell! Thank you!

@OmriCohen-Music 4 года назад

Oh nice, I hope you'll enjoy it!

@holydiver4728 2 года назад

Super interesting ! Nice patch in the end

@OmriCohen-Music 2 года назад

Thanks!

@wimve4719 5 лет назад

Watched this one on pre-release. Missed the première as Tuesday night = rehearsal night so I missed you guys (and gals). Anyway, the ReMove module is simply blowing my mind in terms of what can be done with it. Big Kudos to Ben!

@OmriCohen-Music 5 лет назад

Yes, these modules are crazy! Cheers, Wim!

@strangersun7721 4 года назад

I haven't checked in on VCVRack in a while. Was hoping for this feature last time I played with it about 6 months ago. This is GREAT! Now just allow us to run it as a VST3. Thanks for the video.

@OmriCohen-Music 4 года назад

Yeah, it's a nice one! And the VST version should come out with 2.0 :)

@arsaeterna4285 4 года назад

I only needed the first little bit with the midi mapping but GREAtly appreciated I had no idea how to do it; and now I am controlling my midi like my old EURORACK I used to have : )

@OmriCohen-Music 4 года назад

Oh nice, I'm happy I could help!

@arinevakaoppositaer7241 4 года назад

useful video.. i was long waiting for this module in 2017 but then i forgot vcv rack for about 2 years.. better late than never ;) my bcr2000 is having a second life now !

@OmriCohen-Music 4 года назад

Oh man, nice, have fun!

@septuleptum 5 лет назад

With the v1 release, I still cannot update the paradigm within myself, that each parameter can be modulated now. So eah, thank you again and again :)

@OmriCohen-Music 5 лет назад

Yes, Roman, it's hard to grasp all of the new possibilities now... Thanks and cheers!

@pennywise5095 5 лет назад

It just gets better and better! thank you again !

@OmriCohen-Music 5 лет назад

It's crazier than ever... Cheers!

@gilangkharismaputra1316 Год назад

TAHANKS A LOTTT😭😭😭

@johnnovak1979 4 года назад

This was a very informative tutorial! These modules open up so many possibilities, it's mind-blowing!

@OmriCohen-Music 4 года назад

Yeah, VCV is getting better and better!

@andreas-franke 4 года назад

It's always joy to watch your videos!

@OmriCohen-Music 4 года назад

Thanks so much!

@manne3d 5 лет назад

cool video!...what about bi-directional feedback for midi controllers...and also sending out all the midi cc# etc to the midi-controller when the CVCrack scene loads so VCV and the controller is always in sync (even after reloading a patch).

@OmriCohen-Music 5 лет назад

Thanks! Yes, it will take a bit longer until something like this will be available, but it's it the works :)

@johnnovak1979 4 года назад

The current version of MIDI-CAT does exactly that what you described.

@user-gs1vl2nb2j 2 года назад

That's very very helpful!

@OmriCohen-Music 2 года назад

Cheers!

@sunchylde 4 года назад

You're such a hero. Thanks so much!

@OmriCohen-Music 4 года назад

Glad it helped!

@ellingsonTV 2 года назад

Those Stoermelder modules are so cool. Are they no longer in VCV Rack? I don't see them in the library.

@OmriCohen-Music 2 года назад

Yeah, I don't think they will reach the library any time soon. But you can get them here - github.com/stoermelder/vcvrack-packone/releases/tag/Nightly Just look under Assets.

@ellingsonTV 2 года назад

@@OmriCohen-Music Thanks, Omri!

@HeathClose 5 лет назад

That was epic... This will unlock A LOT for me... thank you.

@OmriCohen-Music 5 лет назад

Thanks so much, Heath!

@DanielZeeglerMusic 5 лет назад

Your videos are so fun to play along with

@OmriCohen-Music 5 лет назад

Thanks, Daniel!

@marcelomoura5597 5 лет назад

muito obrigado cohen, estou aprendendo muito com seus videos

@OmriCohen-Music 5 лет назад

Cheers, Marcelo!

@KRDS23 Год назад

Thanks so much !

@OmriCohen-Music Год назад

Cheers!

@fangPS 5 лет назад

Thanks a lot for the tutorial. Really helped.

@OmriCohen-Music 5 лет назад

Thanks so much!

@G0nz0uk 5 лет назад

Damn this so good as usual, please do more with VCV and just the BSP :). Would love to see a start to finish ambient tune using the power of the BSP for us to follow.

@OmriCohen-Music 5 лет назад

Thank you! Yeah, I'm hoping to make more videos with hardware soon :)

@G0nz0uk 5 лет назад

Omri Cohen great! The BSP is so good with VCV, I’m just using midi mapping (basic) but would be great to see how sequencing, drums and using a synth on it would be. Learning from you makes things way easier, a natural.

@OmriCohen-Music 5 лет назад

Yes, I would enjoy doing something like this :)

@domino-mao8912 5 лет назад

Amazing video, as usual!

@OmriCohen-Music 5 лет назад

Thanks so much!

@xav500011 2 года назад

Can you midi map cable patches? So real physical patch cables on a midi controller would translate to software patch cables inside VCV Rack.

@OmriCohen-Music 2 года назад

Have a look here :) ru-vid.com/show-UC4jZsW1BAJa47L78Q5QczbQvideos

@souvlak1 2 года назад

thanks!!!

@OmriCohen-Music 2 года назад

Cheers!

@artao5 5 лет назад

THANK YOU!!! When I looked up the online manual for MIDI Map module, all I found was "To DO" .. I managed to figure out basic usage, but it turns out I was doing it backwards LOL Also, stop turning me on to more module packs LOL ;) :P

@OmriCohen-Music 5 лет назад

Thanks so much, I'm happy I could help :)

@ZaraAlicomposer 3 года назад

u r soo amazing thank uuu

@OmriCohen-Music 3 года назад

Happy to help!

@edinmesic8015 5 лет назад

Nice video! Sky is the limit!

@OmriCohen-Music 5 лет назад

Thanks, Edin! Yeah, there is sooooo much to explore...

@corrision303 4 года назад

sir! i salute you ! wowser..

@OmriCohen-Music 4 года назад

Thanks!

@matteocrimes Год назад

how you can map the "play" button? it seems not working on mine

@edwardnixon1782 2 года назад

Hello Omri. As of May/2022, there are no Stoermelder modules available in VCV 2. Can you point me to info about if/when/how that functionality can be handled today? Great stuff as always! Thanks! ...edN

@OmriCohen-Music 2 года назад

Yeah, unfortunately, they're not in the library but you can get them here - github.com/stoermelder/vcvrack-packone/releases/tag/Nightly You can find the files under Assets

@edwardnixon1782 2 года назад

@@OmriCohen-Music Thanks very much! Very helpful as always.

@OmriCohen-Music 2 года назад

@@edwardnixon1782 cheers!

@nickwillder 2 года назад

I wondered, how do I map my hardware controller knobs individually through VCV to a hosted VST synth?

@OmriCohen-Music 2 года назад

Well, there are dedicated slots for modulation on the Host modules so you will need to use the Midi-CC module for that and not the Midi-Map.

@nickwillder 2 года назад

@@OmriCohen-Music Thanks, Omri. I thought the numbers 0-15 showing in MIDI-CC were refering to the 16 MIDI channels, not CC numbers. Silly mistake.

@OmriCohen-Music 2 года назад

@@nickwillder No worries, have fun!

@vicowlsmokebgg8882 5 лет назад

Man thx so much 🔥🔥🔥🐐🖤

@OmriCohen-Music 5 лет назад

I'm happy I could help :) Cheers!

@theroyalfamily5279 5 лет назад

its just so amazing whats possible in vcv since 1.0 why people spend money on DAW when this is free :) ans thanks for the tip with the automations , i dont now that !

@OmriCohen-Music 5 лет назад

Yes, it's amazing how many possibilities we have now... Cheers!

@stephenmurphy8349 4 года назад

So recording the CV in VCV Rack from a hardware knob is achievable with a combination of these modules?

@OmriCohen-Music 4 года назад

Well, yes :)

@adityahavnur2484 3 года назад

I use an Akai APC Key 25. The knobs are mapped to the faders in the mixer as desired but when I try to map the buttons on the launchpad to a solo or a mute button on the mixer for example, it just sends a trigger. I mean, the channel is muted only till the button is pressed. The moment that button is released the channel is unmuted again. The same with step sequencers. None of the functions stay triggered past the button release. How do I send gates as opposed to triggers? How do I fix this?

@OmriCohen-Music 3 года назад

Hi! Well, it depends on the modules you use. For example, if you use the MindMeld mixer, there's an option in its right click menu to change this from momentary to latch. But not all modules have this option so what you can do is use a FlipFlop. Basically, with each trigger from your controller, it will output a gate from one output, and with another click, it will close this gate so it's basically a latch function. Let me know if it works for you.

@cowleyaustin 3 года назад

Wonderful video and very helpful! I was curious, is there any way to record with the RemoVE module while at the same time using a hardware midi controller? For example, I am trying to control the JW-modules GridSeq sequencer with my hardware controller while also recording those gestures with the RemoVE module. To my understanding, this would require double mapping the same knob in the GridSeq module, which I'm not sure is possible.

@OmriCohen-Music 3 года назад

Thanks! There's a hack you can try. You will need to use both the uMAP and the ReMove for that. First, you map the parameter with uMap, and send the Midi to the input of uMap. Then you map the Offset control of uMap with ReMove, and send the Midi to the input of ReMove as well. This means that you can control the parameter with Midi, but also record the movement when you want. Let me know if it works for you :)

@cowleyaustin 3 года назад

@@OmriCohen-Music It worked! That's a game-changer -- thank you so much. Worth mentioning that it only worked when record mode in the ReMove module was set to manual, not the touch or move modes.

@wholesalemonkeyfarm 2 года назад

There's no option to do Relative mode CC mapping right? (i.e. 64=-, 66=+, etc.)

@OmriCohen-Music 2 года назад

I'm not so sure I understand...

@gullunisebastien8601 5 лет назад

Really nice video Omri ! Thank you so much for sharing your knowledge :) I was wondering if there is a way to map a controller knob to many parameters in VCV while being able to change the value range for each parameter? It would be really useful I think !

@OmriCohen-Music 5 лет назад

Thanks! Well, I don't think that it's possible actually... With Midi Mapping, for now at least, you will get the whole range. You can though use the Midi-CC module for the parameters that have a CV input and this will allow you to set the range you want.

@gullunisebastien8601 5 лет назад

Thanks for your Quick answer !

@OmriCohen-Music 5 лет назад

@@gullunisebastien8601 No worries :)

@eddycurrent413 4 года назад

you sound so much like great scott

@haloskycrash Год назад

I'm trying to map eg. pitch knobs on a sequencer. It jumps from 0 to 100% only. It's also inverted. I have an Akai MPK mini 3. Should I just throw together some knobs and buttoms in Max MSP?

@OmriCohen-Music Год назад

How do you set things up?

@calebm.9125 2 года назад

I’m having trouble finding the Stoermelder modules in the library. Have they been removed?

@OmriCohen-Music 2 года назад

Well, they are still not in the library. You can find them here though - github.com/stoermelder/vcvrack-packone/releases/tag/Nightly You can download the file under Assets.

@calebm.9125 2 года назад

@@OmriCohen-Music 🤙🏻 thank you!

@francismcfadden3305 4 года назад

I have an APC mini. I currently trying to map the pads like you mapped the mute buttons with the pads on the beatstep. Thing is, the APC mini's pads output notes, not CC. So that mulimapper doesn't work. Now there's that 23 volts multimapper but the problem with that mapper is that it does do on or off on it's mapping (at least as far as I can tell) the buttons on the mapper only light up blue when I press one of the notes and don't turn off no matter how much I press them. I'm basically trying to use the APC mini as a drum machine if that helps. Any help anyone can give me is appreciated.

@artem_r 4 года назад

Thanks for the awesome videos! Really inspiring. I have a small question regarding midi mapping - my knobs jump from 0 to 127 on 1 step, any ideas what could be the reason? Thanks in advance!

@OmriCohen-Music 4 года назад

Thanks so much! Which controller are you using? It looks like the knobs are set to send gates so they will jump to the highest value.

@artem_r 4 года назад

@@OmriCohen-Music I'm using the same Beatstep Pro. I tried to change settings in Arturia MIDI Center - no luck. But works fine with Ableton in MCU mode

@mjusick42 4 года назад

VERY NICE!!! I only understand a half of the stuff, but this is so great... THANKS!!! I want to control my Roland System-1 with VCV-Rack (e.g the Cross Mod which is CC52 with an LFO of VCV) and I tried it with the CV-CC Module. But there are only CCs 0-15. Do you know a way to use CCs 0-127 to control Hardware Synths with VCV sending CCs via midi out (I searched a lot but found no tutorial on this...)?

@OmriCohen-Music 4 года назад

Thanks! Well, if you have a patch saved, you can open it with the notepad for example on Windows (or the equivalent on Mac) and edit exactly the numbers you need. Let me know if it works.

@mjusick42 4 года назад

@@OmriCohen-Music Thank you very much, it works! I would never have come to that without your help! I tried so many things. You really helped me a lot !!

@OmriCohen-Music 4 года назад

@@mjusick42 Perfect! Have fun :)

@f1flick 3 года назад

Woah go back a few steps. I plugged various USB Midi controllers into my PC and they doesn’t show up anywhere in VCV RACK. First of all how do I get them listed in the VCV MAP module? Thanks. Not using a DAW.

@OmriCohen-Music 3 года назад

It's pretty much plug and play, there's no specific setting or something similar. Which controllers do you have?

@f1flick 3 года назад

I figured it out thank you. I just subscribed. Looking forward to following your posts as I discover the wonders of VCV RACK.

@OmriCohen-Music 3 года назад

@@f1flick Oh nice, I'm happy it works!

@murishal 3 года назад

Any help. I have bsp, but it's not reacting when I try to map the knobs :(

@murishal 3 года назад

hm, figured it out, but only works when I select any channel

@OmriCohen-Music 3 года назад

You have to set it with the Midi control center so you know which channel is for using the knobs as controllers.

@paulclifford9008 5 лет назад

MIDI-GATE > MERGE > CV-MAP allows midi notes to toggle switches

@OmriCohen-Music 5 лет назад

Oh, nice one!

@paulclifford9008 5 лет назад

Actually, only works on “toggling” switches, e.g. the loop button on Chronoblob, if set to “momentary” will only change while note is pressed. One way to correct this is using Bog Audio Switch module it latch mode and send a constant +10V to the high input

@Manko-fg5tk 4 года назад

Hello omri, do you know if there is a vcv rack module that does the same thing as varigate from malekko ? Thank you

@OmriCohen-Music 4 года назад

Hi! Well, not really, but the Malekko collection should come to VCV soon (hopefully) :)

@MrGloupiboulga 5 лет назад

Nice video!!!!! I'm tcheck , how to use CV-Pam .

@OmriCohen-Music 5 лет назад

Thanks! Share what you came up with!

@bluename4 5 лет назад

how can one setup the "Mackie MCU Control Pro" with VCV Rack (via mackie-control protocol)?

@OmriCohen-Music 5 лет назад

Well, I'm pretty sure that it can send also Midi out so you just have to map the controls you want to use.

@bluename4 5 лет назад

@@OmriCohen-Music how can this be achieved, since MCU has no mapping software?

@OmriCohen-Music 5 лет назад

You will have to use it as a Midi controller and assign the controls in VCV.

@bluename4 4 года назад

how mcu mackie control mapping to hardware?

@OmriCohen-Music 4 года назад

I'm not so sure I understand...

@bluename4 4 года назад

@@OmriCohen-Music can a Mackie "MCU Pro" hardware mixer be mapped to VCV-Rack software via the "mackie protocol" (instead of midi)?

@NicholasTripp 5 лет назад

I'd really like to get pads on a Novation LaunchControl to control buttons. Anyone had any luck with controller pads yet?

@OmriCohen-Music 5 лет назад

I don't have the Launch Control, but what is the behavior you get when using the pads for controlling buttons?

@NicholasTripp 5 лет назад

@@OmriCohen-Music So far MIDI-MAP doesn't recognize pads when they're pressed. I've tried setting both press types ("Momentary" and "Toggle") as well as both message types ("Note" and "CC").

@OmriCohen-Music 5 лет назад

Oh ok... Did you try using the other Midi modules like Gate? Do you have more than one choice when it comes to selecting a controller in the Midi-Map module?

@NicholasTripp 5 лет назад

@@OmriCohen-Music The MIDI-Gate module does seem to map the pads on the Launch Control to the outputs. So that's something. NowI guess I have to figure out how to map a pad to a module button/switch.

@heheynop9996 5 лет назад

woooow

@OmriCohen-Music 5 лет назад

Cheers!

@paultyrrell8060 5 лет назад

Can you use more than one midi controller with vcv rack?

@OmriCohen-Music 5 лет назад

Yes, totally. I also use a few different ones at the same time like the BSP, the nanoControl, and the Midilar all together. You just need a different Midi module for each controller.

@paultyrrell8060 5 лет назад

Thanks Omri

@OmriCohen-Music 5 лет назад

No worries :)

@cryptout 5 лет назад

I need a beatstep now 😬

@wimve4719 5 лет назад

The BSP is truly incredible, definitely get one. As far as controllers go, this is also the one stop go for me too. In combination with the Keystep, the sky's the limit. Amazing job by Arturia!

@OmriCohen-Music 5 лет назад

And the BSP needs you...

@OmriCohen-Music 5 лет назад

Yes, I really love my BSP... And the Keystep!