How to configuration VLAN on the Mikrotik router. This video explains step by step how to create a new VLAN on Mikrotik router. Mikrotik RB2011UiAS-2HnD-IN amzn.to/3LZlXOv Subscribe now because it's free / netvn82 #netvn #mikrotik #vlan
Thank you so much. This way, if you have a home wireless router, will work fine, because you aren't passing VLANs tagged through other devices or Switch. This worked for me using a home wireless router (Mercusys)
Thank you so much for the VLAN tutorial, many people are disagree with the setup. Please may those who are disagree with the setup please help with the correct way of configuring vlans
this is a WRONG tutorial. because you are connecting the ether2 port to your pc/laptop and its not going through VLAN100 its going to physical ether2 port. you are assigning the address to bridge port and DHCP is getting address from the bridge not via vlan, for getting via vlan, you need trunk also.
To separate vlan's from each other (ip's is for example, put your owns): IP -> Filter Rules -> New Rule chain=input action=drop src=192.168.2.0/24 dst=192.168.4.0/24 chain=input action=drop src=192.168.4.0/24 dst=192.168.2.0/24
According to your video tutorial, I configured two vlans and two dhcp address pools on a Lan port on ROS, and there is a switch below, which is also configured with two vlans and a trunk configured by the uplink port, but the PC under the switch Could not get IP address. Do you know where the settings are not correct? Please reply, thank you very much!
This is deprecated (software) method to make vlan in Mikrotik. I used it a few years ago. Modern method - bridge filtering togather with hardware offload.
This is not VLAN config. You do not have VLAN filtering turned on on the bridges... If you do, then you have to specify VLAN id on your NIC according this setup.
Thank you very much :) Did we now made 2 separate networks on one device? (am I right?) And what if I want to add one mikrotik device for WiFi, for example witch shares IP addresses of VLAN200?? Is there any chance to make video about that or explain in a hurry? Please...
I have wds router and a few vlan. Working only then if I set vlan on Interface not in bridge. Vlan can be in bridge, address also can , but /interface vlan interface must be at interface, which is part bridge. I sometimes tried set vlan interface:bridge , but showing me loop.😂 So: Interface vlan ,raw interface, dhcp and ip address also in interface, not bridge. This is the best way to success.
bonjour merci pour cette formation complet , mais j'ai un problème j'ai installer un serveur mikrotik dans une machine virtuel et lors de la configuration des réseaux wifi on me dit " Master interface : unknown" je ne comprend pas d'où vient le problème
I didn't watch the whole video, just the few seconds. Adding multiple bridges on the same Mikrotik device is mostly not what you want, it also disables hardware acceleration for bridges on some models.
The only reason it works is because you have ports added in the bridge group. The dhcp server is running on that bridge group that contains ports!! Totally wrong !!
Totaly, totaly wrong. VLAN 100 can talk and ping VLAN 200. Those are only two different networks. No VLAN. Whoever use this video to setup VLAN is in deep trouble and misleading. However this is good example of misunderstanding VLAN concepts.
