MikroTips: managing many access points with CAPsMAN

Просмотров 137 тыс.

% 2 002

=== IMPORTANT NOTE ===
This is and old video for our older devices running older RouterOS versions. If you have a 802.11ax compatible (newer) device, it uses the new Wifi CAPsMAN settings, for more information, please see: help.mikrotik.com/docs/display/ROS/WiFi#WiFi-WiFiCAPsMAN
=======================
UPDATE: Before you start, important note! Some devices have disabled the "local forwarding" setting in the capsman configuration template "datapath" tab. This tutorial assumes you have it checked. Some defices have different defaults, so just mark this checkbox to follow the steps in this tutorial. Local forwarding must be on!
When you have one MikroTik access point, but want to add another one to widen your coverage, follow this tutorial and use CAPsMAN to manage as many APs as you want.

Наука

Опубликовано:

20 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 297

@gpligor 2 года назад

Excellent explanation, awesome video editting and beautiful scene setup with the mic and the shadows. Keep up the good work, I'll try this at home

@jembodo 2 года назад

Great to see you guys are doing these videos! Been a fan since replacing a Cisco device at work with an RB2011 years ago. I have Capsman setup at home with hEX S, hAP AC, and hAP AC Lite combo with 3 wifi VLANs. Most solid wifi experience I've had! It's not for the faint of hearts, though.

@wabilemotswasele8705 2 года назад

I followed you guide and managed to have my RB Cap AP to connect to the capsman running on another RB device. Thank you for such a simplified guide.

@martinbraunstein5242 2 года назад

These Mikrotips are great. I hope you will keep making them.

@Anavllama 2 года назад

Bonjour, Hola, G'day Normunds! Great start to a capsman learning series! Please consider adding bridge/vlans + capsman for a next video to address the very common home scenario of having multiple WLANS (home, guest, media, iot).

@technics6215 2 года назад

This is awesome. You are doing awesome network hardware with affordable price. Thank you MikroTik!

@matelotjim9035 2 года назад

Nice guide. It would be good to see a guide about how to setup the firewall, something that would be very useful for the home user.

@mikrotik 2 года назад

Thanks for the idea!

@DinoelK 2 года назад

this will be great

@evilcraig359 Год назад

If you set it up per Mikrotiks directions it is good. It will not let anything thru even a internet connection.

@toulcit 2 года назад

Just set up 2 acces points with an Ethernet router. Couldn't have done it without this video. Thank you!

@chiderachike7995 Месяц назад

Hi I'm not seeing the APs in CAPSMAN on the CAPSMAN router. I used a POE switch for the 2 Mikrotik APs (CAP AC) Any help with it?

@piticarobert 2 года назад

i try alone for 4h and with this video i configure it in 5 min , thanks man

@AlexApol Год назад

great presenter. Fantastic job explaining the CAPs feature!

@jeanpasset9088 Год назад

Great tutorial, it cleared up a lot of grey areas for me

@duzbinboy Год назад

This is exactly what I was looking for, thank you, awesome help!

@mikrotik Год назад

Great to hear!

@torinstorkey Год назад

Nice to see that CAPsMAN is now available for wifiwave2 enabled access points. I would love to see some wifi6e access points by microtik.

@AliceVixie 2 года назад

I love the sound setup with "shotgun" microphone on a boom like real filmmakers do. Finally great sound without some big cardioid in view or a lavaliere with "chest" sound.

@jawadarbabzade6585 Год назад

Tanx for your friendly explaining 🙏🏼

@nelsonlim5189 2 года назад

great video ! i would like to wait for the next video about what we could do to maximize the capsman config, seamles roaming for example, that would be great

@mikrotik 2 года назад

Even the config that is shown in this video will work fine with moving client devices, they will seemlessly reconnect to other CAP devices and even voice calls are not dropped.

@ChrisNicholson 2 года назад

@@mikrotik The ACL features might be enough to influence roaming by "kicking clients" at certain thresholds.

@vegatyme1 2 года назад

I have only just gotten my cAP integrated, and in my testing device (wifi analyzer on lenovo tablet), I am seeing that while you don't lose connection, it takes a minute to switch its radio over from the RB4011 to the cAP. I think sometimes, "seamless roaming" is dependent on the client device that's doing the roaming.

@floriangrill9561 2 года назад

Thanks for the video, it was very helpful. However, it was necessary for me to activate under Datapath> Bridge>" Bridge". It would also be great if the video explains how I put Vlan on my cap. A Vlan video in general would be great. Keep it up!

@mikrotik 2 года назад

Not really. It's optional. Some devices have disabled the "local forwarding" setting in the capsman configuration template "datapath" tab. This tutorial assumes you have it checked. Some defices have different defaults, so just mark this checkbox to follow the steps in this tutorial. Local forwarding must be on!

@Gojiranotron 2 года назад

There is a mistake in the video. If you follow it as it is, you'll be able to ping outside but not browse. You need to add a datapath to the capsman for the bridge that will have the ports your CAPs are connected to.

@Wrenchmonkey1 2 года назад

Thank you! I just spent several hours messing with this repeatedly following the guide step by step and could not figure out why I couldn't pass data. You set me in the right direction!

@kolifx 2 года назад

Mikrotik: Hey, everybody look, CAPSMAN is so easy, just click here and there and it works! Me: Trying to get it working for four hours after watching the video 10 times and finding the solution from a random guy in the comments section...

@mikrotik 2 года назад

@Gojiranotron 2 года назад

@@mikrotik it should be mentioned then. You can see for yourself there are plenty of people this video doesn't work for. At least my solution gets it working, especially considering how frustrating it is to follow the official video and still have it not work.

@austinmabry8462 2 года назад

@@mikrotik A tutorial that relies the assumption of other of prior setup steps having been taken isn't really much of a tutorial.

@Appytail 5 месяцев назад

Every time I listen to a Mikrotik video, I take it as an history class.. Seing how things were done 4 decades ago. Everything is easy, as long as you read instructions and "how to" for years before you attempt anything. In this era of shortage of everything, CLI and interfaces such as these has no place anymore. I come from an era before the IP stack existed. So I know. I.e. mac address only & 1BaseT. You read correct. 1BASET. And token rings. In the early 80's, I expected interfaces to be far more evolved than that.

@evgeniyloginov 2 года назад

nice and simple tutorial

@takacsi 2 года назад

Very useful! Would be nice a part2 with advanced features. Thx!

@rds0009 2 года назад

I hope that there are configuration tutorial videos of different Mikrotik unit being uploaded to youtube for reference of all Mikrotik users like me.

@andytwgss 2 года назад

I understand Mikrotik doesn't like to bind user to certain workflow, but it'd be great if the guide can be titled to show the general structure of an application

@samarthshah4347 2 года назад

HI, Can I use multiple WsAP and make a mesh form the same, using the CapsMan as stated by you in the video? All of them are connected wired but they are on a Netgear POE Switch.

@arleyfreitas2376 2 года назад

Sensacional e prático!!!👏🏻👏🏻👏🏻 Vou montar isso em casa!!! Muito obrigado pela explicação!!! Os canais ele escolhe aleatórios de forma automática? Para não se sobreporem? Porque o dispositivo leva as vezes 10 minutos para selecionar o canal? Isso ainda não ficou claro para mim... No mais Mikrotik é top demais!!! Não troco de jeito nenhum...

@putlerhuylo359 2 года назад

Nice video!

@karolkrzyzyk2859 2 года назад

Nice video. Can you prepare next one "how to manage MT audience MESH and CAPsMAN"

@mzsolnay 6 месяцев назад

Hi ! Thanks for this detailed explanation. It was easy understandable even for me as a non expert. Hovewer, I could not provision my internal wifi adapter, becouse nothing was shown on my "radio" tab. I followed every step exactly as described. What could be wrong ?

@KnaufL 2 года назад

When will you add 802.11 k/v/r and WPA3 support to routerOS?

@DonLuca27 Год назад

Does this need the new access point to be wired to the main router in order to work? Or can the second access point work as a repeater without the need of an ethernet cable connected to the main router?

@marine1718 2 года назад

Hi there can I add devices to cspsman without cable? Like mesh or I need a cable?

@kf7nn 2 года назад

i have a garage i need wifi in, but there is no ethernet cable out there, can i just take a MK router and put it in caps mode so it can connect to the caps manager in the house or do i need a wired connection? i mean if i have to have a wire then it defeats the purpose doesnt it?

@TomasKotasek Год назад

Please add this information as a comment and pin it to TOP. After 2 hours of trying everything I finally found this under video and it works. UPDATE: BEFORE YOU START, IMPORTANT NOTE! SOME DEVICES HAVE DISABLED THE "LOCAL FORWARDING" SETTING IN THE CAPSMAN CONFIGURATION TEMPLATE "DATAPATH" TAB. THIS TUTORIAL ASSUMES YOU HAVE IT CHECKED.

@athims 2 года назад

What I can see here is that ac3 is powered on with no antennas attached... Is it ok nowadays?

@i-town 2 года назад

Hello! @MikroTik How to choose the maximum power of the Wi-Fi router adapter in capsman mode, regardless of the country you choose? Something like this: frequency-mode > manual-txpower.

@starjw68 Год назад

Could you add video about Capsman wifi wave2 combined with the old one, I just bought hap ax lite Capsman is not working (I planned to use also hap ax3), could you tell us shortly process to use capsman wifi wave2, what’s happened when I use new capsman wave 2 combined with the old hardware, many thanks in advance.

@volkervogel7713 2 года назад

In your Campus or hotel network you want set up your APS so that the neighbouring channels are not overlapping. Can you explain how to to this with caps man ?

@zenmaster24 Год назад

can you connect your new device and caps manager to a non-mikrotik switch in the middle? ie the switch does not have the capability of being managed, but an ap attached to it is.

@mastergs2 2 года назад

Great tutorial, thanks. Q: Can I combine one CAP with another CAP? Will they both work?

@iskar460 2 года назад

Hello! Could you help me with a Cloud Hosted Router OS Mikrotik ? I'm making a lab in EVE-NG, and in my version of mikrotik i can't tune the wireless interface. It does not exist in the interface list and in PCI Resourses too. VMDK image 6.49.6 Stable is installed in the lab.

@MrF3d3r3r Год назад

I was trying to set this up via wlan interface(had no MAC adapter) and I lost connection. There is an additional step required for me. Once I added the interfaces to capsman I needed ot assign the config to it.

@tuanha7651 2 года назад

it's nice fast roaming, but on app calling, video call still interrupted about 2-3 seconds and reconnecting.

@JANHERMAN19 Год назад

Hi. This is my first time setup up the capsman and i did everything on the video step by step. I can pickup up my ssid but it does not want to obtain a IP

@logananderon9693 8 месяцев назад

Can we get the same functionality for firewall rules? I have a bunch of remote sites that are hard to keep in sync. Palo Alto does that via Panorama for many many thousands of dollars.

@Mrkviczka Год назад

If i will create second SSID for all my devices i need to create second configuration, second provisioning and i will have double the amount of CAP interfaces? I want to make some guest wifi access.

@SimonJMudd Год назад

I have an issue with revoked certificates breaking this setup and find no docs on how to issue a replacement without having to reset any existing configurations, This is with layer 3 capsman. I get a message about sulking and I’m using the standard mutual TLS with request certificate option on the cap. Pointers would be useful. I have multiple APs.

@josepharueyingho9417 Год назад

Sir Can I use this method, using another device like TP-Link connecting to Mikrotik and setting it to Repeater Mode?

@technology4allacademy375 2 года назад

useful information

@jungl3ist Год назад

if i install multiple ap-s , roaming is activated by default ? ex: if i have a live skype conference, and i wander around and i connect to a different antenna, will my like skype connection be dropped ?

@tmac9938 9 месяцев назад

yeah but how do i set up a mesh network. or when to use capsman vs mesh vs do they work together?????

@tazavi111 9 месяцев назад

i am trying to follow this tutorial, all looks to be fine, I have configured CSR109 as capsman, When I follow this tutorial just like that, I can have SSID broadcast on CSR109 visible on my smartphone, but the caps I configure do not get SSID. I do not understand what I am doing wrong.

@tariq4846 Год назад

What if we don’t have cable connection between two locations?

@orion3311 Год назад

I've followed this process, but don't see the second access point on the remote CAP menu. I can manually connect them with an ethernet cable and provision it that way, but they still don't seem to see each other once I disconnect the ethernet cable. Has anyone had this problem?

@mindshelfpro 2 года назад

How do you setup VLANs for different SSIDs on MikroTik APs?

@andreanaerik7540 Год назад

Blakk Bee Mac version seems to have so better support for certain midi devices. And not using the ASIO drivers has a lot to do with

@C0deWarri0r 2 года назад

Is it possible to turn on a hap ac^3 w/o antennas attach?

@vegatyme1 2 года назад

I grappled with Capsman to manage a single access point...I know it's much more practical when managing a large number of access points, but a couple of model specific observations here. I am noticing that while the RB4011 is brilliant in every other way, as are all Mikrotik products, it is buggy with Capsman, and not friendly with my cAP ac....Particularly when it comes to integrating the built in wireless with the AP. After much wailing and gnashing of teeth, I was finally able to integrate all four wireless interfaces under Capsman. I know this is a known issue with the RB4011, but with a little work, it is not insurmountable. Is there an OS update due to address this quirk in the RB 4011?

@mikrotik 2 года назад

I’m not aware of any issues with capsman with RB4011, in fact, I use it myself at home. Can you email us at support with more information?

@iambookey Год назад

Is it possible to access my Mikrotik router over the internet when I am not within the local network coverage?

@asorin2000 8 месяцев назад

Remember a important settings: In CAPsMAN | CAP Interface | each cap settings, at Datapath Tab, Choose Bridge1 or other. I lost few days with this. I setup few times, but wifi clients cannot take IP. Now it's Ok.

@user-lv2fq2uh1s Год назад

Hi Guys.... I followed the video. Clients can connect to the APs configured via the CAPsMan but cannot connect to the wireless signal of the Master AP. That is the wireless signal of the device acting as master. Feedback will be appreciated.

@Albert-yv2ue 8 месяцев назад

Important that all cap interface, if you are using bridge, might be asociated to the bridge.

@jerrygibson1422 2 года назад

Does it have a provision for band steering?

@youtubegarbage4u 2 года назад

how about if we want to setup audience? and mesh network?

@kresimirpecar4925 2 года назад

Nice video, great tutorial. I'm running Hex S and cAP ac like you, but i had to add new cap interfaces in bridge or else my devices was unable to get IP, i'm running ROS 7.1.1.

@mikrotik 2 года назад

Not needed, just check box “local forwarding” in data path menu

@kresimirpecar4925 2 года назад

@@mikrotik Thanks, I will change my config to one you suggested

@Coldphoenix44 2 месяца назад

Will there be a guide to how to set this on the new wifiwave2 routers ?

@dontknowler 2 месяца назад

Have a Mikrotik access point which used to obtain IP adresses for its WiFi client devices via dhcp from my main non-wifi-capable Mikrotik router. I did set up a mesh configuration following your guide as I was adding another Mikrotik AP to my system. The mesh in itself is up and running, but the Wifi client devices which connect via the dynamic mesh interfaces now cannot obtain IP adresses from my 'main' router any more :-( How do I get dhcp relay working for my mesh? Thank you!

@stefanlodders9521 11 месяцев назад

I understand you left out config for 2.4 or 5 GHz, but how necessary would this be in a real world scenario? What'd be the downsides if you'd skip that?

@dtabsadventure 9 месяцев назад

Great video just want to ask if will this work for other brands of AP's? or it's just for mikrotik AP.

@mikrotik 9 месяцев назад

Only MikroTik devices can be managed like this

@altatensioneip Год назад

You say that it is all automatic about frequency. Every ap choose better frequency or they are all on same channel?

@nathwald 2 года назад

Is it possible to enforce a mac address access list throught capsman?

@hurle0409 6 месяцев назад

Does this balance load (Bandwidth) when clients visible to 2 or more APs?

@itzizag2280 2 года назад

Thank You. I have question can i use other ap like cisco, tplink and other vender control by capsman?

@mikrotik 2 года назад

@jax10x 5 месяцев назад

Can I add AP from other manufacturers? I have 2 wifi routers in AP mode from Xiaomi and I need to add wifi roaming. Please help.

@iamyulianto2 Год назад

@MikrotikLatvia is it ok for the router if we're not attaching the antenna like in the video? I heard that if we turn it on without antenna attached it will damage the radio module inside it, is that information is true?

@mikrotik Год назад

Depends on the model, one hAP ac3 comes with antennas, another one comes without antennas. You should check which model you have and follow instructions.

@christopherstaples6758 10 месяцев назад

so how the heck to you get this "home mesh "to work , quickset does not seem to do anything either

@JokeryEU 10 месяцев назад

how to use CAPsMAN to add a different router thats not mikrotik like a tp-link?

@psy0rz Год назад

Does mikrotik has some kind of system to automaticly choose or optimize channels?

@georgesdibeh7826 6 месяцев назад

What about interference incase of multiple AP does capsman take it into account

@JbVlad Месяц назад

This was a great guide but with the new OS its not as easy anymore.All my APs are dead after a upgrade leaving me with downgrading it somehow or replacing it with Unifi before end of this week. Not even reseting can bring back the default caps config making quick install impossible. Your guides are still great. Thank you.

@chiderachike7995 Месяц назад

I have been stuck trying to see them on my Router's CAPS mode. Please were you able to solve yours?

@JbVlad Месяц назад

@@chiderachike7995 I have installed the wifi-qcom-ac-7.14.3-arm.npk on my cap ac and could set it up again. On older devices I needed wireless-7.14.3-mipsbe.npk and this created a second capsman menu but this older menu doesn not work with the newer capsman.

@stephenwong9723 2 года назад

How do you run Winbox on your Mac? Or, where can I download a Winbox that can run natively on Mac?

@mikrotik 2 года назад

Just use softare called Wine.

@tareqanohasando Год назад

How many devices can this CAPsMAN can handle? What is the maximum number of ap can be connected and managed? I need to know the real life experience. We use ap controller for large working projects where 100-200 devices get connected via 6-10 ap.

@kasarhausa2912 2 года назад

At least give us his name or personal channel to thank him, Well done bro you made every step easy to understand, I benefited a lot thank. But still I need your personal channel if you have one.

@mikrotik 2 года назад

😁 ru-vid.com%C4%8Ds

@EthanDavids Год назад

Mikrotik please can you show us part of enabling local forwarding as the AP I have is not leasing an IP Address to my devices.

@EthanDavids Год назад

Here is my how I configured my CAPsMAN: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iUIJ8enyJZk.html Thanks

@Dvach_Hikka 2 года назад

The company I work in have some major problems with the wifi we're running (Capsman + cap acs seamless) combined with Macs - frequent disconnects, low speeds etc etc. Is there some sort of solution for M1 Macs or should I switch back from seamless wifi to different SSID names?

@mikrotik 2 года назад

Write an email to support, we will see what’s going on. We use Apple devices and have not seen issues

@urvhalt 11 месяцев назад

But, no authentication between the capmode client and its server(s)? How do it know it found a trusted server?

@renderance3551 2 года назад

Can you do a guide on Mikrotik Mesh?

@ChrisNicholson 2 года назад

Audience

@hey_leao 2 года назад

When we'll see WPA3? The market urges for security improvements!

@mikrotik 2 года назад

It's already available, but not for CAPsMAN yet. For the hAP ac3 you can install the Wave2 package and have it: help.mikrotik.com/docs/display/ROS/WifiWave2

@hey_leao 2 года назад

@@mikrotik I didnt know, sorry =/

@nikolashuminosky6987 2 года назад

Hi normis, Is my calculation right? approximately 10sec would be for CAOS Mode, 15sec would be reset by default and 20sec for netinstall.

@mikrotik 2 года назад

actually no, 5 for reset 10 for CAP mode 15 for netinstall it's in the manual: help.mikrotik.com/docs/display/UM/cAP+ac

@dimleb1972 2 года назад

Hi I would like to ask you if i have 3 mikrotik hap ac3 and I want to connect via capsman. The question is and all 3 will work as accespoint or only 2 . Thanks a lot

@mikrotik 2 года назад

You can have 3 working as access points. Actually just like the video explains. Watch it please :)

@pipertime1 2 года назад

Pro-Mikrotik here - Good Video! My question and I can't find it anywhere, can you use capsman APs wirelessly? I see all AP's running off a wire in the online diagrams. I have a hap ac3 on it's way and want to start using capsman. Can it link to the cap server wirelessly and still sever clients? Hex s is my main router and the caps server, hotspot >> then a wired Omnitik ac. I would like to connect the new Hap ac3 to the OmniTik. I also want to make the Omnitik a cap ap.

@mikrotik 2 года назад

Yes and no. 1) it will not be this easy, manual configuration is involved 2) capsman can't manage itself anymore, only others (because it needs internal wireless AP where the CAP devices will connect to, to get their configs) 3) CAP devices need to either: 3a) sacrifice one of their interfaces for the management connection, for example 2GHz will be in CPE mode and connected to CAPSMAN, but the 5GHz will be the managed AP 3b) or you can use repeater mode (have client / AP mode on same interfacew), but that takes a big performance hit

@pipertime1 2 года назад

@@mikrotik That's fine using one of the wireless interfaces (2GHz) as the management connection. Manual config is ok. Can it go through the Omnitik to the cap server on the Hex s (of course the Omnitik is only 5GHz)? Please give me an example if this is possible of how to config the Omnitik and then to the hex s or maybe the Omnitik should be the cap server? I just need the right direction to go. Thanks for the info......

@zeyadsulaiman1597 2 года назад

the internet didnt work till i create a datapaths bridge , the caps ac didnt appear in my remote ac even i tried to boot it many times , and cant see it in winbox even , not sure whats the reason

@mikrotik 2 года назад

@robertst2565 2 года назад

Wireless dveices were not acquiring IP for me untill in Datapaths tab I added bridge

@mikrotik 2 года назад

Or you can do better - This tutorial assumes you have it checked. Some defices have different defaults, so just mark this checkbox to follow the steps in this tutorial. Local forwarding must be on!

@zhvn89 Год назад

I wasn't able to configure Mikrotik hap AC2 as a CAP with HAP ax2. Both on RouterOS 7.8. Hap ax2 even doesn't have CAPsMAN. FRUSTRATING.

@Jorvs Год назад

can I use asus router as my AP? will this be compatible?

@fadelmawas6274 2 года назад

01. Datapath must be set to bridge for devices to receive IPs via dhcp. 02. In the Datapath settings tab, I had to enable Local Forwarding for better bandwidth over wifi. Failure to turn on Local Forwarding caused a heavy load on the main router's CPU, which resulted in half or even less bandwidth, especially on the 5 GHz band. 03. There is no possibility in CAPsMAN for setting the Frequency Mode to Superchannel, and that made me gave up CAPsMAN. Without CAPsMAN with normal wifi configuration I have over 20dBi on cAP ac (RBcAPGi-5acD2nD) and with CAPsMAN enabled only 17dBi (on 5 GHz wifi interface), that resulted in poor or no wifi connection in some spots of the house.

@mikrotik 2 года назад

1. I'm using local-forwarding in the video, so datapath is not required at all. 2. Yes, It is on for me in this tutorial 3. Superchannel is illegal to use for regular wifi users, and CAPsMAN is for that. Superchannel can be used if you have some exemption by the regulator.

@fadelmawas6274 2 года назад

@@mikrotik Thank you for your answer. 1. min 6:11 local-forwarding not enabled but it's ok, good to know that it's ok using local-forwarding without datapath. 2. ok, I saw only at 6:11 that datapath tab is blank, I may not have noticed when local-forwarding setting was made 3. I was kind of expecting this answer, but I said I'd still write about the superchannel so others can see why they might have a weaker signal when activating CAPsMAN. Yes, it is illegal but it is very useful in different situations. Thank you again. :)

@fuerchtnix1 2 года назад

Hi, before i start with my config i have a Question: my Router have no Wlan(RB2011UiAS) . Can i use your Guide too?

@mikrotik 2 года назад

Yes, except you will not be configuring the built in interface (you don’t have it), the rest of the guide is the same for you too

@Operaatoors 2 года назад

Can I setup capsman on LTE dish, and then distribute this config further via switch which has currently two wireless devices connected - wAP and hAP ac3?

@mikrotik 2 года назад

Yes, exactly, you can do that. Those wireless devices will find the capsman server. Config is basically the same as in the video, except you don't have to configure the built-in wireless interface as CAP

@Operaatoors 2 года назад

@@mikrotik great, thanks! Will try to change config. At the moment my wAP is in bridge mode, is it okay to just hard reset everything there and start from fresh page?

@mikrotik 2 года назад

Yes, like in the video, boot the wap when holding button. It will change into cap mode

@Operaatoors Год назад

@@mikrotik Thanks, I managed already then set up the capsman managed network. Now I had a question - is it possible to access capsman routers using IP address, like the parent Caps config holder. I wanted to play around containers, but connecting with Mac address to router is quite frustrating. And second issue - CAPs are not able to connect to outside world at the moment, therefore - time is not set correctly, updates have to be brought in via downloading to computer and then uploading it manually, and worst - docker images are not possible to be downloaded.