Miller Multimatic 220 Mig Welding Techniques 

Sometimes when I watch your welding I just want to just give up. This is a prime example. I would have thought filling those gaps in one pass was impossible. Welding that pipe joint in two passes and having it look like it was welded by a robot just leaves me dumb struck. Still the best welding vids on RU-vid. Please keep them coming.

One of the most detailed and professional welding channels on RU-vid

i’m going to my first welding competition it’s pipe to plate and i’m freaking out watch your videos gives me confidence

Ah,the old Huntsman 411P!Been using mine for longer than I care to admit,can honestly say it's my favorite helmet by a long shot!

Every employer I have had said that I was the best all round welder they ever have seen. Nope! Jody is the best I ever seen. I couldn't hold a candle to you Jody.

Its insane that that weld (to me as a shoemaker when it comes to welding) looks phenomenal and your wishing it looked better. Amazing to watch technique.

Welding and fabricating for old car restoration for 35 years, welding still looks more like magic than science.

Another great video THANK YOU Jodi for all the info over the years and the PODCAST listen to it every Monday before going in to work !

Nice Jody, thanks. I have officially watched every one of your videos now! Still learning and perfecting Mig. Progression is a bit slow with family time but nonetheless having a blast every moment I get in the garage! Love your videos man! Be blessed!!!

You make this look so easy. My welds never seem to come out looking that good.

By far the best quality welding up close shots

You’re video’s are the best tutorial videos on RU-vid, I feel totally informed on the subject. You should probably teach people how to make videos... thanks

im always fascinated by your art sir, i learn alot just by watching your videos..i have a welding experience for 3 yrs in japan, tig and mig welding, but now i have come home(philippines) hoping to go back to japan to continue my welding career...thank you for the vids, its alot of help especially to a newbie like me.. God bless sir and the team

Those welds looked great to me! Thanks for another great video.

When I was an apprentice welder back in the 70's the company I worked for had wanted to get me working with the MIG process and had a BOC (British oxygen Company) come and show me how to use the process and show how advantageous it could be to the company and the down hill open square edge butt weld was the first weld I did and it amazed me how after completing a few test runs that you could not tell from what side I had actually welded from it had me looking in astonishment and so much the demonstrator had said once I finished my apprenticeship i should apply for a job with him as he put it I had the knack. I did but he had left only one day to be reunited with him as he was a technical director of a welding supplies company and i was employed to go to companies where they were having weld issues and for me to go with boiler suit in hand and address the issues. Satisfaction of helping fellow welders get over problems was almost worth more than the salary, not really but close. With regards to the fillet pass on the tube and flange I would of single stringer bead a root pass and cap with a weave, just my own opinion

Props to the camera guy. Editing (cutting between feeds back and forth) was top notch. I like most of the other welding channels on youtube, but yours is the go-to. :) Down-hand can make very sound welds. Down-hand is the technique of choice in equipment/ repair and commercial welding applications. Down-hand is nice when it comes to dealing with copious gap. We don't always have the option of flipping stuff around or busting the fit and re-cutting new steel/metal. I like FCAW too. GMAW is nice. I tried copying like you do when it comes to tracing the puddle's profile. It helps me crank the Volts up and still have proper crowning. Thank you for another good video !

Nice job with the video shots in this one. Really liked all the different angles shown.

good tip showing grinding a transition zone for the next start to keep it hot ... so as to try to avoid leaks...

Another fantastic video. Please Jody, some videos using an Everlast multiprocess.

Yet another great video Jody! Keep it up!!! I’m gonna reload stock of my mig knuckles and TIG fingers

I like that mig knuckle!! Might even work while oxy-acetylene torch work

Jody you are a true artist. I've got a long way to go before I can weld as good as you with my powerarc welder.

Finally MIG welding again !!! 👍 🎇

Damn... my welds suck. Well done, sir. On reminding me that there's always room for improvement.

Happy with my mp220 just need to learn an Amps to Volts conversion eg 1/8 = .125"=125A start point =??.?V .. I use stickout adjustments to change heat. On this weld I'd run the auto setting with V. toped out or 1 notch below, to satisfy the 3/16 standard stickout on pipe side and add 1/8-3/16" stickout on thinner plates ection of the v motion. Longer =colder shorter =hotter (more wire =larger resistor in circuit=fewer amps at the arc) Nice work as always I learn something new from you.

Thanks Jodie as always I learned from ur teachings

Usually I crank the heat and run a really fast bead with a slight side to side twitch this is for the 5/32 downhill btw

Great videos. Thank you

I am portuguese welder and i am shocked! Nice MIG WELDS!

Tell your Son-in-Law to wear clear safety glasses to protect his eyes from the UV rays coming off the weld arc. I also recommend that everyone wear UV protection under their helmet. It's a cheap fix for a big problem. Corrective glasses, like Jody wears, will also protect you. You don't want to have to get Cataract surgery in both eyes, like I had to.

Great video! So clear!

Awesome job. I would really like to see a cut and etch of that fillet weld.

Awesome video Jody. Great tips for the weekend warriors. Really nice tie in btw. Thanks for the video

Nice and exelent job Jody Thanks

Ahoy! Great instruction as always. How 'bout a conversation about preheat/post heat procedures. seems to be a knowledge base worth understanding better. Cheers!

looks like sorcery to me haha, very satisfying to watch

Show, estava procurando um exemplo dessa posição de soldagem na MAG , estou com um trabalho parecido para fazer. Obrigado. 👏🏻👏🏻👏🏻👏🏻

You are good trainer sir

How would you reduce the crown ? A little hotter ? or less wire ?

Another great video. Thanks. How about out of position 5F pipe to plate with 7018?

VERAMENTE BELLA LA SOLDATURA SALUDOS

Beautiful passes Sir. Thanks for sharing.

This os one work of quiality.very godoy biutufull Weld

Sometimes I use a tack stack method. Set it hot, almost twice as hot. Start tacking, let each tack cover half of the last tack. Watch the glow start to fade before progressing but never allow the last tack to completely loose its orange color before tacking again.

Can you make it on 1.2mm wire???

I love you guys but I'm really excited about this one because it's all about it and how to make a difference and it can help to get your own life and the rest of the world... 🐏

Thank you mr jody your work help me i lurn meny triks thanks again sorry for my ingles

Can u show us how to mig weld Stainless wire going up?

Do you have any videos of you running .045 mig roots? If so can you post another one

great lesson,

Very nice as usual

I see u went back to an old huntsman hood with a 2x4 lens , great

Oi como chama essa protecao que vc usa na mao pra nao queimar com a solda obrigado

Молодец мужик. Привет из России )

Hello. My name is Gabriel and I´m writing from Argentina. I Have a question, those 289 WPS, how much amps or how much IPM are? GREETINGS AND THANKS FOR HELP.

Ferramenta afiada muito bom

MAKE A VIDEO COMPARING THE MILLER 220 TO THE ESAB REBEL 205

Ótima aulas de soldagem mais terias que ter legendas em português brasileiro ou dublado..

Jody, could you explain how you come up with the width of the root pass opening. I'm just a hobbyist but that 5/32 gap looked very wide and intimidating.

Is this machine capable of spray arc transfer in MIG for 1/4" (or practical?)

So, on something round like this. I like to make short steps and loops. I’ll start with a short step right into the corner, then go back and loop over it.

MIG Knuckle...Must be related to the Pimp Knuckle lol. Great video and a cool product Jody

I thought you would hold just a split second longer on the 1/8th pipe side

Hi Miller I have a experience in this job but I don't get the job

How do you get the gap so even? And how do you set a gap to the right spacing?

What about that same position but 61grain and 81grain flux

To much sparks. Is there is any root process like an stt or wise root?

you edited the video sir am sure because this is welding like a robot :O

Have you ever over heated this machine.?

what would you change to stop the weld crowing?

Máy hàn đã gê .

Where’s the 220 AC/DC stick review

Nice video Jody 👏🏼👏🏼👏🏼👏🏼👏🏼 you could make the same video but with stick 7018 1/8 please🙏🏼🙏🏼🙏🏼 greetings from Chile 🇨🇱

I noticed you don't use a auto darkening helmet. Why not?

Great video! Would you need to grind a spot for a tie in where the weld meets at the end of the weld (the top)? TakeCare Bill

still sell the MIG knuckle? cant see it on website

Why my Millermatic 211 speed is from 10-100 and yours is in the 100's?? I am trying to get down wire speed with amperage

Профессионально!👍👍👍

Excelente

Thank you.

Super

Sir 3g welding me kitna gep hona chahiye

Any time I try welding up I get a huge blob built up at the bottom.

How could I get the MIG KNUCKLE for Spain? don't let me buy it from here - SPAIN. SOMEWAY TO BUY IT PLEASE??

Awesome weld

One question that I would like to ask is mig still hard to grind when u need to flatten a weld because I found when I used stick welding it was not the case

Очень хорошие уроки. Если не трудно покожите пожалуйста как варит 3 шва 5 и 7 швов на двух тавровом швелере H pim

Молодец

How does the everlast 221 stack up to this miller 220?

What size wire?

Awesome videos j, what do u use to shoot & edit ur videos (rig specs program) when ur on the move

but does it comply with ISO- 5817? 3:06

Synergic, buddy, 21 sentury

Awesome, how can a person learn mig. I don't have a mig machine only smaw(stick) and gtaw(tig) welding machine

Unkess you are using dual shield or flux core wire why go uphill. With plain wire I have always gone down hill and passed every test I have ever taken. The only time I go uphill with a mig is with dual shield or flux core because that is much like stick welding but with a mig.

I've had great luck with that upside down v when going uphill like this. I still get more crown than I like though, what do you recommend to level it out? I sure do like these videos, you got a lot more information and camera angles in this one. Thanks!

Is that flux core

i went to the local welding supply ( Edmundston, New-Brunswick, Canada) and i showed them the finger protecter, he took all the info, i think he gone order some, i hope avery thing will work out fine

Круто 👍