Milwaukee M12 with Bad Motor Restoration / Rebuild 

Welcome to my restoration channel. This is a restoration of Milwaukee M12 Impact. I was at a local auction and picked this set up for around $30 USD. As seen or heard in the video, the impact was making a weird growling noise, so this lead to me replacing the motor. This is probably the newest tool that I restored/rebuilt. Would you pay $30 for this kit or pass it up? Let me know.
THE RESTORATION PROCESS
I tore the Milwaukee m12 impact apart and gave the parts a good cleaning. I sandblasted the nose cone and and bit sleeve. I gave the nose cone a quick polish and clean which would be the final result. The bit sleeved was hot blued. Hot bluing is the process where the part is heated up then quenched in oil to achieve the blackened look and to help prevent rust. This part turned out great. I regressed the hammer assembly then put it back together. While working on the plastic impact housing, I messed up some of the rubber, so I fixed that with some glue. I repainted the Milwaukee branding and replaced the decals. As you could hear, the impact was making a growling sound, so I replaced the motor and regreased the gears. You can sure tell a difference.
I think this small tool kit was worth the money and I will be using it in the future.
If you like what I do here, consider subscribing or leaving a like. It helps me out. If you have any questions, comments, or advice, please feel free to leave a comment in the section below the video. Thanks so much for the support. I appreciate your view.
Follow me on Facebook
www.facebook.c...
Follow me on Instagram
/ rebuiltandrestored
Other Videos:
Check out this Ingersoll Rand pneumatic impact Restore: • Restoration of a 1 Dol...
Check out this old Craftsman bench Grinder I Restored and custom new stand: • Awesome Restoration of...
Check out this Snap-On Ratchet Restoration…Mirror Finish: • Mirror Finish. Rusty S...
Check out this old Pipe Vise Restoration: • Restoration of a Ruste...
Check out this Rusted, Stuck Vise Restoration: • Very Rusted & Stuck Vi...
Check out this Vintage Toy Restoration: • Turning a $40 Truck in...
Check out this Old Tonka Truck Restoration: • 1970s Tonka Concrete M...
Have a blessed day!
Kev
Products used or simular in video:
Adjustable Solder Helping hands.amzn.to/3Knpdlj
Bauer Heat Gun.amzn.to/3Mpggtt
Makita 18v Light. amzn.to/3laSKoz
Craftsman Socket Set. amzn.to/3mFs3sv
Camera and filming gear;
Main Camera. amzn.to/428GF3Y
Video Camera. amzn.to/3JD7J41
Main len. samzn.to/3JDIL4F
50mm Lensamzn.to/3mUZZBt
Disclaimer. All links above are affiliate links. I make a small commission if links are used.
------------------------------------------------------------------------------
#restoration
#restore
#tool restoration
#vintage restoration