No video :(

MILWAUKEE M18 CROWN STAPLER HONEST REVIEW | Drywall Finishing Construction Series #6

Подписаться 162 тыс.

Просмотров 45 тыс.

50% 1

Next Video Coming soon. Subscribe goo.gl/dDcLgJ. See what the Drywall Gangsters think of the new Milwaukee M18 FUEL Narrow Crown Stapler. Affiliate link - www.amazon.com... In short, DJ loves it, he saves time by not having to particularly aim, as it shoots through the angle itself and you don't get a sore arm squeezing the conventional way every day. He says the battery life is excellent installing several townhouses worth of angles over the week on just one battery..
The Milwaukee M18 FUEL 18 Gauge Narrow Crown Stapler Skin (M18FNCS18GS-0) delivers the pneumatic performance that professional carpenters & remodels expect with the freedom & convenience of a cordless tool. #Milwaukee #powertools #m18
Key Features:
Staple Length: 9.5-38 Mm (3/8” -1-1/2”)Fires In 0.05 Seconds
Reduced Size For Increased Access In Corners & Tight Spaces.
A nitrogen air spring mechanism gives this cordless staple gun the power to consistently sink staples to the proper depth in hard materials, with the ability to adjust to drive staples in soft materials without blowing through. The combination of a POWERSTATE Brushless Motor & REDLINK PLUS Intelligence provides an unmatched fire rate with zero ramp-up time, ensuring productivity throughout the whole day. This battery powered narrow crown stapler is compact & lightweight, giving better access in tight spaces & limiting fatigue throughout the day. Includes includes two work contact tips & a reversible belt hook.Next Video Coming soon. Subscribe goo.gl/dDcLgJ
Be sure to check out the #DrywallGangsters other jobs they have done on their instagram page and give them a follow: / drywallgangsters
#DrywallFinishingConstructionSeries
TAPING DRYWALL USING MUD BOX | Drywall Finishing Construction Series #1 - • TAPING DRYWALL USING M...
TAPEPRO DRYWALL TOOLS MUD BOX | Drywall Finishing Construction Series #2 - • TAPEPRO DRYWALL TOOLS ...
DRYWALL FINISHING CREW TAPING A UNIT IN 30 MINUTES | Drywall Finishing Construction Series #3 - • DRYWALL FINISHING CREW...
PRO DRYWALL TAPING TIPS & TRICKS | Drywall Finishing Construction Series #4 - • PRO DRYWALL TAPING TIP...
DRYWALL FINISHING SCREW HOLES FASTER HOT TIPS | Drywall Finishing Construction Series #5 - • DRYWALL FINISHING SCRE...
MILWAUKEE M18 CROWN STAPLER HONEST REVIEW | Drywall Finishing Construction Series #6 - • MILWAUKEE M18 CROWN ST...
Instagram: / maxkil2
Facebook: / maxkilptyltd
If your a professional and your business provides this service in your local area, wherever you are in the world, I invite you to add your skill set to a listing on my website global.maxkil....

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@Maxkil 4 года назад

You wait till you see those angles getting finished... a thing of beauty

@mikemorgan5015 Месяц назад

All staples are "crown" staples. These are NARROW crown staples. Driven by a narrow crown stapler. Staples are made is wide range of crown sizes and wire gauges. The crown is the part of the staple that remains while the staple legs are driven into the substrate. This one drives 1/4 inch or 6mm crown staples made from 18ga wire. Staples compared to brads have much more holding power as they won't pull through the affixed piece nearly as easily. When driving them into wood, always try to orient the crown perpendicular to the grain of the wood for maximum pull through resistance.

@EdgeMasterPro 4 года назад

The new fuel batteries all go loose where they clip into tool, sparky was spewing the other week drill, impact driver and circular saw shaking it to get it to work swapping full batteries that come up as empty. For the few corners I have to put in I might be using the brad/stapler looks better than nails or screws. Tight top and bottom unless your next to kitchen cabinets etc. better than Bowes skirting. Leaned another gem

@alexs2778 4 месяца назад

Now I know why some used nailers look more like caulk guns with layers of crap on them, was wondering how nailing a trim makes them look like that. It's probably spackle on some;)

@Gazman152 4 года назад

I knew DJ would love that thing.

@alejandroacosta4697 4 месяца назад

I really liked that drill holder. It’s on Amazon?

@mltndeal5120 2 года назад

I use Ryobi crown stapler airstrike.. It works good putting up corner bead 👍

@philipdove1705 4 года назад

Great vid .I've been using mine for gussets on roof repairs it works great

@quickdog45 4 года назад

Wait there is an M18? Man I am upgrading tomorrow😍😍😍 I only have M12.

@drywallgangsters 4 года назад

We have an M12 also not strong enough. This things a beast

@gadgetg9479 3 года назад

Try spot nail 10 mm staples in a good quality gun, mine fires through rondo exes 9/10 times. The problem I had with the 12v Milwaukee gun was the quality of the firing pin it worked great for 2 weeks and then started skipping staples and shooting 2 staples. I shoot sq set Up with an air gun and cordless compressor, rubbish for exes it bends them. But faster and cheaper than spray glue. Have a look at ave’s channel he dose a tare down and hack on the 12v gun that is vary good Keep up the tool review s max

@samk.871 3 года назад

I use m12 for lighter jobs, containments, it is not meant for framing. How much you pay for the M18 in Australia? I know it is more expensive over there, right?

@jrsuk1170 4 года назад

I want one.

@jayemjayswatosville937 2 года назад

That’s a fookin gen 2 mayt

@garethrichards5401 2 года назад

What brand are the corner beads you use, look way different to what we use in the uk

@optimusprime2854 4 года назад

Dude I've been waiting for this video, I've got the m12 version and its just not up to the job. On my way to Sydney tools now 🤑🤑🤑🤑🤑🤑🤑🤑

@samk.871 3 года назад

I use m12 for lighter jobs, containments, it is not meant for framing. How much you pay for the M18 in Australia? I know it is more expensive over there, right?

@optimusprime2854 3 года назад

@@samk.871 im wasn't framing with the m12 just putting on my corner beads (exys) with it. The m18 crown stapler has no trouble at all. Here in Australia we get ripped when it comes to tools I paid $670 for just the tool.

@gyver471 2 года назад

What size staples you use for corner bead?

@flogarbi6757 4 года назад

Drywall gangster u have to try No-Coat or Straitflex. Did u?

@drywallgangsters 4 года назад

Never tried those before

@tommypaintingplastering2854 3 года назад

that not good, so many problem. I reckon ,

@JB-sz3yw Год назад

Will it work on metal beads attached to metal framing.

@rooofero 7 месяцев назад

It works

@danielfrancisco570 4 года назад

What the mark the pouch nail

@luisp-i582 3 года назад

Quick question??? Why is there a gap between ceiling and wall angle???

@dismaldog 3 года назад

Cornice-(crown molding)-no need to fill in Australia

@ricksgiggle8852 3 года назад

@@dismaldog I've always wondered why they don't just go ahead and fill it in in case they decide to take it down later.

@dismaldog 3 года назад

@@ricksgiggle8852 never seen anyone want to remove and go square set-pretty hard to remove without damaging wall and ceiling anyway

@user-rh5ro7tu1d 2 года назад

👍👍👍

@The021 3 года назад

Does the M12 work as good as the M18 for slim lines? Im wondering which one to get? 🤔

@mauricesand9416 3 года назад

Nah..the m12 isn't ment to be used for that type of.work ..it usually does good at putting up like sunroom screen ,insulation, etc ... bc it doesn't sink the staples that deep ..