Milwaukee VS Makita Impact Driver | M18 Fuel 2953 vs XGT GDT01 

My father did construction his entire life and recently retired. He bought his makita tools in the 1980s and they all still work never broken down on him and he used and abused them to the max and theyre still running strong 💪 epic lol

Lifetime Makita user. Sure has made my life better.

I am a big Makita fan, but it appears that the 40v XGT impact is somewhat of a dud. I think they just fit a 36v batter onto a XDT19. I hope they have something better in the works. As to the torque result, I think Milwaukee is the king for pure power. But power isn't everything. I still have my brushed impact Makita from 2007 and it still runs on common Makita batteries. It's driven way over a million screws, been dropped a bunch. All the aesthetic trim pieces are gone and is worn to the point where it looks like I dragged it behind my truck. Still runs great! Makita is the Toyota of tools. Not flashy, but lasts and lasts.

Why not test them doing things they're actually designed for? If I was running lags that size I would use a drill instead and if I have nuts or bolts over 1/2 inch I'm grabbing my impact wrench.

With Makita having a much more balanced rpm, it’s definitely smoother impact. Milwaukee however with its higher rpm and torque makes it more rougher to handle and less smooth but definitely stronger. I will say Milwaukee’s biggest design flaw is the rear fan vent. That thing will slap you with some small rocks and sand.

The real test unfortunately will take about 6-7 yrs to see the durability aspects. I can only speak anecdotally to the reliability of Makita vs Milwaukee especially on their high end line. Makita just will last longer and I noticed that wobble at 1:50. That really bothers me on impacts when you're in a precarious position and only have one hand to steady the driver. There's more to performance than just specs and having an extra second quickness. The philosophy almost perfectly compares to boring Toyotas (detuned, lower performance but well within spec) vs maxxed out half-baked Jeeps/Dodges. The lots are empty on one with no discounts, the other is stacked with incentives.

I just bought replacements of my Makita tools that are still running strong from 2010 lol. I bought new ones simply because there was a sale. I had a split second where I regretted not switching to Milwaukee as everyone asks me why but I much prefer to sacrifice a second than the longevity of a tool and how easy they are to handle (ya it’s cause I’m a woman 😂)

Makita ergonomics and trigger are far superior. It isnt all about power. I run both Makita (since 2011) and Milwaukee (Started buying M12 & M18 last 3 years) Ive only had 1 makita tool break and they warrantied it. Had it back the next day fixed. Ive had to warranty 5 or 6 Milwaukee tools at this point. They definitely dont last but their warranty is super. Never waited more then a week and had a brand new tool returned from my local repair center. I do have to say though, other the the grip on the M12s due to battery design, i do love that line up of 12V. Theyve got everyone else beat there hands down.

In Australia Makita and Toyota are King ! Both are slightly detuned over the competition but are by far the most reliable. We live in tough conditions with extreme remote areas and reliability is everything!

Not about power. I do Solar and banging out lags all day long, I’ve had to replace Milwaukee about 4 times in 2 years. Makita, not even once. No brainer

I hope I get to your level one day. you videos are amazing!

Surprised NO reviewers seem to test trigger control of all the impacts, especially given Milwaukee made such a big deal of the Gen 4 trigger refinements. The only person I've seen focus on this is Doc of Last Best Tool, and he specifically commends the Surge line for much finer control. PTR: Request for a trigger sensitivity (inc speed steps) test including: Flex QE Makita TD002 M18 Gen 4 Metabo SSD 18 LTX 200 Festool TID 18 Hercules (new) Kobalt XTR

I run both batteries... Honestly I love the Makita trigger they are easier to control the speed but at the end of the day I use Milwaukee most of the time

Both fantastic tools no doubt

as a milwaukee guy, i use mostly m18 and i use a old 2nd gen so i would love to try the new 4 gen!

I personally own Makita Impact drivers, a Makita cordless drill, and a corded Makita drill from 1990, and they all run great. I am loyal to the Makita brand. I have friends who are die-hard Milwaukee owners. I have to admit, Milwaukee makes really dam good power tools. I'm a loyalist, so I will only buy Makita products with my money, but if someone bought me a Milwaukee power tool for Christmas, I would be happy. I don't think you could go wrong with either brand, just pick the one you want to bond with for the rest of your life cause that's what most power tool owners do is start a tool collection without even knowing it. Great review sir, excellent stuff ! 🚀🚀

All of my chordless tools are milwaukee and they are amazing. But I tried my coworkers makita impact drivers a few times and I've gotta say those things are the smoothest and most comfortable impacts I've ever used. The speed and power isn't quite as good as milwaukee but if I had to use one or the other I'd choose makita. Only reason I don't own one is becuase I prefer to stick to one type of battery and I like more of the tools in milwaukees line than makitas. But makitas impact driver definetly beats milwaukees

Just got the gen 4 Milwaukee today. Never used Makita so I can't compare, but I love my M12 and M18 systems all the way around.

I never understand the lag driving competitions… wouldn’t it be quicker to pre-drill appropriately and then sink your lag?

I own the Milwaukee g4 .. kinda love it but not sure if it's $255 love. Better than the $279-$320 price it can carry

Makita, Japanese engineering vs Milwaukee, wonder which one is going to last the longest 🤔 The Toyota 4Runner is not the best in towing, horse power, size, price, technology, comfort, mpg etc etc etc but it will last 400,000-500,000 miles, 2-6x longer than the competition ❤❤❤ I'll take the 4Runner every day.

The comparison test was great what if I just need a drill for simple house work and our jobs? With Makita be an OK choice

Although the milwaukee is shorter, it has a wider head. I prefer the makitas narrower design. You can get into tighter corners. Milwaukee always has the most power. In my opinion makita is my favorite for ergonomics

Do both batteries use the same 18650 cells?

It probably didn’t make a 4 second difference, but the person driving lags with the Makita should drive them straight, not at an angle. Also, I concur with not being sucked into one line of tools. There are adapters for every line (or virtually every line) to every other line.

just a note milwaukee Fuel tools are supposed to be using the High Output battier XC 3.0, 6.0, 8.0 and 12.0 because the tool gets an extra 30% boost from the battery for the m18 fuel line

I love Milwaukee and out here I'm the small towns of the midwest there are typically dewault and Milwaukee around and the few makitas I have use have been butter really smooth and the smoothness stays for the life of the tool Milwaukee is robust but it clunks and is very usable after awhile but the clunking gets rougher and an old 6yr makita still is smooth less heat too idk

I saw the Makit 40v Kit with the Impact and Hammer Drill for $449 at Home Depot , so to Pay $429 just for the Impact Kit Driver is Insane 😂🤣😂

Always using the Makita Impact at an angle.

I’d buy Makita every time and I’ve used them both. Because the Makita is better built and feels so much better in my hand.

Had both, Makita is way better, Milwaukee only beats it in power.

Can you test the new 4 mode impact driver from Ridgid, seems to be passing most of the other competition

Quality, features, and control are all things the Milwaukee doesn't come close to Makita on. Surprised you never included at least the features in this.

We’ve used Makita and now Milwaukee at work, I’ve been blown away by Milwaukee. Nothing against Makita but Milwaukee just seems better. The lineup is better at HD too.

Would like to see the Makita jp dgt 40v.

What about the durability of the trigger and the chuck on the Milwaukee? Is the battery movement any better than previously? What about chuck movement comparison? I have both and they each have their place

I have the Makita and on full power it will regularly brake pz2 bits using 4 inch wood screws in 4by2 timbers so more power is not needed in my opinion the trigger control is great very happy with it I do have Milwaukee tools as well and want to get this Milwaukee impact driver as I have the batteries and charger for it not sold on yet though…..

No mention of ergonomics and vibration. I like my Makita better than the Milwaukee I have used. Less fatigue over time. Also not mentioned is 4th generation vs 1st gen on a brand new platform that has lower heat output. One is close to being retired, the other is just getting started. All that being said the fuel performed really well.

im surprised that milwaukee lasted the entire video without going up in smoke lol

Get your hands on the Milwaukee M18 top handle saw.

I’m Makita user and have all form the 18 volt line it will cost me to much money to go millwake between my 10 5.0 batteries and all the tools I have but I like Millwake a lot and is cheaper is hats off to millwake

I used the Milwaukee gen 4 impact for steel framing and it flunked out on me 3 times

When you are driving screws all day the Makita wins. So much easier on the body, it does not shake, rattle or turn your wrist even when your dead exhausted. That Milwaukee would be sweet for small jobs that need a lot of power

What I like about Makita impact drivers is they don’t beat you to death when you run them all day. Milwaukee and Hercules impact drivers Will fatigue you far more than Makita

You don't get a 5 year warranty with registration for Makita in the states? Interesting. Also, one more thing to consider if buying into one of these platforms is other tools that are available. The M18 range is absolutely incredible, but the Makita 40v has some tools available that you will never see on an 18v platform. Food for thought. Great video though.

I always use Milwaukee for drills and Makita for everything else, Makita saws are levels above Milwaukee IMO

nice review. Im Bangladeshi

Love Milwaukee tools...

Would have liked to see them use the 18v 5ahm version of the Makita ..everything else has been stated clearly here by other people ..going from the comment im not the only journeyman construction worker who prefers Makita.

This comment is for all of those who use tools like this and understand them: Take videos and reviews like this with a grain of salt. I use (and own) Milwaukee, Makita, and DeWalt (Plus much more that is to long to list here). They each have their own strengths and weaknesses. Ryobi, Bosch. etc. are also worth considering. This is not a scientific experiment. Don't subject yourself to brand loyalty. Buy the tools you like and want. If Milwaukee has the best impact wrench, I'll use that, then. If DeWalt had the best orbital sanders, belt sanders, planers, I'll use that. If Makita has a bit more precision and comfort and feel for drilling a hole or slapping in a lag screw with more accuracy I'll use that. Cosider the task at hand and what needs to be done. You can have all of these tools. Don't be tricked into thinking you MUST go with one brand forever. Get the best you can from all of them. "you can't have the best of both worlds." , B.S. I have the best of 3 worlds., and counting. Exapnd your lineup wisely between brands, not just the tools.

I am very hard on my tools. Work them to death, except they will not die. I run Makita. They have never failed me. Some I have had since 2005 when the first 18 volt lithium ion were offered. Other brands may outperform Makita on tests. But in the real world, they can't be beat.

Ergonomics and ease of use? Put the Xdt19 to this test

I love the surge m18

Would the Milwaukee handle removing lug nuts from a Honda Accord ?

Personally i think makita have slipped downwards they used to be the brand to beat but not anymore this Milwaukee impact is awesome and unbeatable value for performance and warrenty good job Milwaukee

Which one is more reliable tool in long-term(Makita Vs Milwaukee)?

Power is not always a good thing, too much power can strip bolts, break screws and attachments. Theyre both great tools.

I wonder what setting the Makita was on.

How about testing the new Hercules impact against these two beasts? I’d like to see that head to head!!

My personal thoughts are makita is better for fine finish work .for framing Milwaukee is good. I have some of both in my tool arsenal

The Milwaukee is great I just switched platforms because they make more plumbing tools .. that being said I think makitas qc is a lot better mine have lasted 10 years plus

I know taking the volts into consideration might let you say its an even test but the battery power used in the milwaukee is so much more. Hardly a fair comparison. Why you couldn't just compare apples with apples I'll never know. I'm a De Walt guy so no I don't have a preference. Pity.

I would still buy the Makita

its like the Kawasaki kx450 vs the Yamaha 450. do you want all power or manageable power tbh i like the color of makita and i have A company card so i just bough the 7 tool kit

I’ve been using makita, Milwaukee and DEWALT for years. If you want to quality tools. I would say makita. They are perfect for fine job.

I like the surge Milwaukee. It has a bit less power, but it's hydraulic construction gives half the noise, so that I won't go as deaf as my Dad got from using noisy tools.

Use the makita with a 5 amp battery

Milwaukee might perform better on each test if you were running their newer HO 6.0 batteries

I have both and I think you're rpm tac was off

I have found that the bigger battery makes the difference.

I was almost lured into the cool innovative ways of Makita and they have some speedy powerful fun stuff. But as Makita is raising their prices and showing off I have come to realize that Milwaukee makes strong and tough tools that stand the test of time. Maybe not always first on the ball, but when they make something they make it good. They also have better synergy with the batteries, that can be used across the machines. Makita splits up into 18v and 40v on the bigger machines. I don't like that. Only complaint I have is the awkward start and stop buttons on the jigsaw. Maybe I'm doing it wrong, but I can't get comfortable with it. I'd like a thumb on/off switch at the top. But I'm very happy with the machines from Milwaukee.

I own Milwaukee but always bat an eye at the makitas my co workers use

Quality over quantity

Packs a punch for its size

Difinitiva mente Millwauke es de lo mejor! es de otro planeta! viva millwaukee

I ran Milwaukee for years. The makita is a far finer and more refined tool. It doesn’t have the power, but the power doesn’t matter. The makita trigger control is leagues better than Milwaukee. The speed control is FAR better. Makita is designed for fine work

i love watching videos about tools. m18 tools malakas sa rpm its a beast. Bosch at Makita mahina ang rpm. Pagdating sa durability bosch germany and makita japan. ito ang mga tools na unang dumating sa pilipinas 😊

DIAMOND 💎 JEWELER........... support your boy......

M18 2953 is so powerfull and cheaper... It'll be good choice... It's time for the Red 👏🏼👏🏼👏🏼😊

The milwaukee drill doesn't look the same after i watched Netflx..

Who not have both :)😊

Japanese makita just waiting for its chance to show its control and crazy power in this fight

Makita

ref previous comment : Ive used black n decker ... then elu... dewalt ... makita... millwauki .. hilti blah bleeding blah .. 9

Needs to be up against the makita TD173.

So jealous about us prices, here in Sweden that makita kit is 829 usd...

To me looks like you have a stronger battery on Milwaukee 5.0 & a 2.5 on Makita !

2:21 just put the svrew in straight ffs

You forgot to test harsh environments. Working in -40C I was the only one on the jobsite with a working makita all the other contractor had there milwaukee batteries die on them

Think I will stick with Makita . Yeah there slower but they just perform better overall. In my experience Milwaukee is tough but Makita I think is tougher.

Makita more refined and less vibration. He’s just a Milwaukee fanboy! Plus he doesn’t use the newest model of Makita, but he uses the newest model of Milwaukee. Notice yet to put two hands on the impact driver at first because there’s a lot of cam out with Milwaukee.

Milwaukee for sure!

I understand people love their Makita, but man this wasnt even close ..

I have all Milwaukee , however used makita lately , by far better , better ergonomically balanced , smoother , lighter considering to change over if Milwaukee doesn't lift their game

He’s not pushing hard on Mikita when he’s screwing down

You toenailed with the makita…

Milwaukee ✅

Well ... I wasn't in the market for one of these, but if I get into the market ... the choice is ultra clear! Milwaukee all the way.

I just like the look of makita

MILWAUKEE all day every day