Тёмный

Mini Bike TRIKE! All Cars And No Mini Monster Bike Make Ian Roussel A Dull Boy 

Full Custom Ian
Подписаться 120 тыс.
Просмотров 121 тыс.
50% 1

Mini Bike TRIKE! All Cars And No Mini Monster Bike Make Ian Roussel A Dull Boy
roussels-custom-fabrication.m...
Shop our store today through July 9th to get 20% off of your order using the code word Blue
Follow along as we create this monster from the ground up. BIG Thanks to Evan at RCF Minibikes. Who doesn't love a mini bike!
IF YOU ENJOYED THIS CONTENT
🛸 SUBSCRIBE
🛸LIKE
🛸COMMENT
🛸SHARE
🛸SET YOUR NOTIFICATIONS SO YOU DO NOT MISS ANY NEW CONTENT
Ian worked and studied at a bronze casting foundry as a young man, where he learned to create models, armatures, molds and finished sculptural artwork in all mediums and finishes. Ian is fascinated by the artistic process of sculpture. He brings this knowledge to his car customizations, to his Full Custom Garage TV show audience, and now he brings it to you, his growing RU-vid audience.
Ian's Address📪
I.R. (For Large Packages 📦 Make It Out to Mojave Post Office #122)
PO Box 122
Mojave California 93502
We also have an amazon store for you to shop some of the basics we use at our rural ranch!
www.amazon.com/shop/fullcusto...
Follow Ian and Jamie on Instagram👽
@Full_Custom_Ian
@Mrs_Roussel_
👩🏻‍🎨Follow Our Artist Who Created Our Hot Rod UFO Design on Instagram
@thechookyhand
👨🏻‍🎨Animation Done By The One and Only
@corvette.mike on Instagram
Music:
slip.stream/tracks/b14bfefa-c...
cadillac full custom garage classiccars california car show custom garage full custom garage ian roussel full custom garage season 1 full custom garage season 2 full custom garage season 3 full custom garage season 4 full custom garage season 5 full custom garage season 6 full custom garage season 7 full custom garage season 8 full custom garage season 9 volkswagen VW

Авто/Мото

Опубликовано:

 

2 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 390   
@davidbriggs2515
@davidbriggs2515 12 дней назад
Nothing dull about Ian’s builds
@genehasenbuhler2594
@genehasenbuhler2594 10 дней назад
I made one very similar to this back in 2016! It was 12ft long from axle to axle! I used the gearing from a 21 speed bicycle and doubled it with three derailers! The chain ran through a z pattern! The seat was low in the frame with the 13hp motor in the back like a v dub! My frame was made from thick wall 2and a quarter inch conduit tubing! It bends in an s pattern from the seat to the triple tree! And I hand made a springer style set of forks! I'm currently working on a mini C Cab trike! Love this guy's work!
@fullcustomIan
@fullcustomIan 12 дней назад
roussels-custom-fabrication.myshopify.com/. Shop our store this week for 20% off using code word Blue. We are back this week in spite of the heat and the big changes happening with us. We hope those of you that celebrate the 4th of July have a safe holiday and those of you on the other side of the Equator...Stay WARM. It is hot up here! We will be back next week with more content once the heat breaks. Until then stay cool friends! ~ The Roussels REMEMBER TO DROP THAT LIKE AND LEAVE US A COMMENT!!!!!! Thank you!
@40momba
@40momba 12 дней назад
Congratulations on the move kids! George The GlassMan!👽👽👽👽👽👽
@rickywhite7578
@rickywhite7578 11 дней назад
I'm surprised that you are out there doing anything in the heat.
@fullcustomIan
@fullcustomIan 11 дней назад
@@rickywhite7578 Agreed. It is only going to get hotter and we want to get back in the shop.
@cryingdemocrats1460
@cryingdemocrats1460 9 дней назад
Hopefully you got a good deal with full custom to release the show on youtube... after you reached one hundred thousand subscribers...
@flippypixel
@flippypixel 8 дней назад
Those Lennox grinders are hard to kill. It would be interesting to see how long one lasts in your shop, I almost sent you one myself.
@tomrowe7534
@tomrowe7534 12 дней назад
I’ve never seen Ian do so much precision measuring, with a yard stick no less. I like the change of pace and project. I’m guessing the big announcement is that Ian will be performing 1 man fabricating show in Vegas while Jamie treats emergency patients with videos of the dogs and wild space music in the Sphere. Looking forward to the costumes
@jokinggianna
@jokinggianna 12 дней назад
you’re still my favorite RU-vidr since day one!! I’ll always watch every video!! ❤ thank you for using the wheel on this amazing trike!
@fullcustomIan
@fullcustomIan 11 дней назад
We finally found the PERFECT project for the steering wheel. We couldn't be more excited to use it.
@davfrui
@davfrui 11 дней назад
Ian my man I just did a mini bike for adults and cut right in front of where the motor mounts and straight above and stretched the frame 8 inches. That way your not eating your knees bro
@amishmonkhermit
@amishmonkhermit 9 дней назад
Thank you so much Jamie for your detailed camerawork and tight editing. The intelligent questions are great too. Thanks Ian for the mold-breaking fabrication and techniques for the DIY fabricator. Its more than metal, its a way of life. Thank you both and bless you this Independence Day.
@fullcustomIan
@fullcustomIan 9 дней назад
Thank you 🙏 😎 You see us!
@AllenSalisbury-go1od
@AllenSalisbury-go1od 12 дней назад
Ian is the master of the Eyecrometer.
@ephjay6t87
@ephjay6t87 11 дней назад
And the Bob Ross of Hot Rod auto body.
@mrfatbobrider1969
@mrfatbobrider1969 11 дней назад
That and the Thumb-Bob… 🙌 …AKA the Plumb-bob…
@mrfatbobrider1969
@mrfatbobrider1969 11 дней назад
As always cool content along with some pretty cool sounds… Have you heard of (and you probably have) the band YELLO and one of their songs is called… The Great Race ? Be a good soundtrack for one of your drive and reveal videos in the Dunes or out on some kind of track Pretty sure the fans will DIG IT ✌️couple o frosty adult beverages and perhaps some other type of fun stimulants of ones choice… 💨💨🍺🍺💨💨🍺🍺💨💨🍺🍺 Loving Your Guys Ideas,the process and of course the end result of your Guy’s lovely Masterpieces … ✌️😎👍🇳🇿
@edwardkisner3119
@edwardkisner3119 12 дней назад
Cant wait to see the new shop in Tehatchipi. We decided to stay for a couple days and total our car in the canyon. Bad winds the day we went through and it actually blew the car off the road. Otherwise it was a beautiful place. Hope it is what you are looking for.
@OGRocker1
@OGRocker1 12 дней назад
Mornin all....Greeting Earthlein's ...what up space man !
@danbates6285
@danbates6285 12 дней назад
Also Victor is a Madman and a Beast always keep you on your toes. Never a dull moment
@larrym.1209
@larrym.1209 11 дней назад
In the future if you create a fiberglass mold, to release it from the plug you can use air. Place random blow holes, and blow air under the edge of the mold as well.
@charleslawrence7194
@charleslawrence7194 11 дней назад
You just can't second guess Ian. Says he is a simple guy but I don't think so. Love to watch him do his magic.
@DIRTFan107
@DIRTFan107 10 дней назад
I think that this mini chopper trike is going to be cool and fun when it's done. I think the Drag boat project was really cool and different from the other custom cars that you and Victor have done.
@jeremiahsheppard7818
@jeremiahsheppard7818 4 дня назад
Dear Ian I think you are 1 of the greatest fabricators of all time time.I have one idea I want you too try that would put you up there with paul jr. Try 3d flames with neon lights.I wanted too try it for years but I haven’t done it yet.
@DH-bw2rx
@DH-bw2rx 11 дней назад
Ian’s thought process is like organized chaos. It’s entertaining to watch, and oddly familiar. Must be a gearhead thing. 😎
@willwade1101
@willwade1101 12 дней назад
Between the ages of 9 and 13 I was building chopper bikes with home made springer front ends. My dad got 200 springs from a bunch of machines they company he worked for was replacing. I finally ran out of those springs and couldn't find any like them so I stopped building chopper bikes
@MrRickad
@MrRickad 10 дней назад
I love this building process! Can’t wait for the final results
@mikehynes6632
@mikehynes6632 7 дней назад
Amazing watching Ian work thru the design in his head!
@keithwallington4966
@keithwallington4966 12 дней назад
Im thinking your engine in backwards but i do like your thinking on a chopper i made one out of a kids tricycal on 13"car wheels with ace bars back in the 70s it was at ally pally cutom car show 😊✌👍
@nickmorrow3829
@nickmorrow3829 9 дней назад
Is it in backwards? Thought the same thing
@65bugnut
@65bugnut 12 дней назад
It looks great so far Ian. Thanks for the video today. I'm building my own "Full Custom" shelf for my storage shed, and needed a break. Congratulations on your big announcement.
@netfun8
@netfun8 11 дней назад
I did some rat fink model kits as a kid. Watching you work on this mini bike trike it totally clicked something in my rat fink past. So I looked up rat fink model and MPC sells a Trick Trike Series on amazon. Lists decals and parts. Loving this project!
@michaelcrebbin7328
@michaelcrebbin7328 11 дней назад
Man watching Ian work it out and fabricate on the is so educational and therapeutic and the same time love it 🥰🥰🥰
@richardelliott8352
@richardelliott8352 12 дней назад
can't help but be reminded of Ed "Big Daddy" Roth who built nothing but trikes after he moved to the high desert , except Roth was committed to the concept as serious transportation, thinking it the wave of the future in practical transportation.
@billweinholtz154
@billweinholtz154 12 дней назад
All work and no play makes for a dull day. Happy Independence Day to everyone
@PAVEMENTMOD
@PAVEMENTMOD 11 дней назад
Music got me thinking, how about a 1/3 scale Ian Roussel take on the Munsters Coach?
@johnm.withersiv4352
@johnm.withersiv4352 12 дней назад
I've always wanted to rehab a mini bike chopper. For a while I had a Kawasaki GPZ 305 engine tucked away without carbs that was small enough to squeeze into a mini bike chopper frame. My plan was to keep as much of the original chopper as possible but get it street legal and small. Never did. Finally sold off the engine to someone that needed a replacement in the LT 305.
@tims72demon
@tims72demon 11 дней назад
An actual drum brake ! Me and Dad built one around 1960 and all it had was a screech brake !!! Don’t run thru water !!!! But it was great. 👍👍👍
@fredcarrano
@fredcarrano 12 дней назад
I had to stop and wonder what you were doing a few times but it worked out great. Can't wait to see more of this build. Bayside New York is watching.
@danielnelson6712
@danielnelson6712 12 дней назад
I absolutely love your hubcap of fasteners.My Dad had what he called"The magic box of goodies.We called it "Dad's garden of Earthly delights."It always had what was needed.
@kevinlucas8437
@kevinlucas8437 10 дней назад
Another mad scientist creative build to watch 😮
@jnorth568
@jnorth568 11 дней назад
As always, your work has shown to be unique and unexpected. At the same time, it does look like the classic big wheels three-wheel rider I used to have as a kid just as Jamie mentioned❤😊❤
@diegom3250
@diegom3250 10 дней назад
Ian best fabricator of all time!
@danbates6285
@danbates6285 12 дней назад
Howdy Ian I Really like the videos and especially the TV show, No drama and No BS and not to mention I learn a lot even at 67 years old! Keep up the great work
@dave-uf8ir
@dave-uf8ir 11 дней назад
Gotta go guys need to set up sprinkler on gravel road neighbors dusting us out bad will finish video later bev holder cheers 🥂 guys
@davidohler5611
@davidohler5611 12 дней назад
Good to see you playing Ian - looking like a pretty cool thing you’re building. Rock on if it clears the mental mechanism-enjoy
@Dx-Volcano
@Dx-Volcano 7 дней назад
110 degrees Monday Good night guys !
@TheKustomBeardoh
@TheKustomBeardoh 12 дней назад
This is a fun rad little build! Sometimes it's just fun to mess around with a fun project. Can't wait to see this one come together.
@georgemyers6518
@georgemyers6518 11 дней назад
This is going to be awesome. When I was a kid in the late 60’s- early 70’s I saw chopped mini bikes but never a mini bike trike
@caseyspirit9385
@caseyspirit9385 12 дней назад
This is a cool build start for sure. Can’t wait to watch it be built. Thanks for the channel!
@sethdoll2059
@sethdoll2059 День назад
I've been watching Ian for years one of my absolute favorite fabricators! I haven't seen anything from I didn't just absolutely love I'm also a fellow v dubber!
@abcullens2328
@abcullens2328 11 дней назад
Love the project........I think you might need a bigger engine, the 212cc is a great engine, but 6 1/2 hp may not be enough. please consider this when building the engine mounting plate. Or I could be wrong and it will work out just fine, thanks for the video. Nice work by both of you.
@zachrowe986
@zachrowe986 11 дней назад
The purple trike you made i loved that trike EVERYTHING YOU BUILD IS BADASS IAN THANKS TRULY
@hughmullican4835
@hughmullican4835 8 дней назад
By far my favorite show not even close
@armysheep75
@armysheep75 11 дней назад
It's cute watching them try to tiptoe around the "secret", after they announced it on FB, and all the (not so subtle) hints about hating the heat. lol also it's a Shepherd's crook.
@fullcustomIan
@fullcustomIan 8 дней назад
LOL. Not everyone is on social media though.
@jefferynugent
@jefferynugent 11 дней назад
Always amazes me with his ideas and talents.
@brentbarnes5802
@brentbarnes5802 7 дней назад
Man Ian. I want the purple trike with the coffin tank. Sitting at victors lol. I loved that one
@sizzle073
@sizzle073 12 дней назад
Sweeeet. It reminds me as a kid in the 70’s, my dad fabbed up a plate so that same style wheel was on my bicycle. And my brother fabbed up a side car for his ten speed.
@derbf1
@derbf1 7 дней назад
The cup holder is in the beverage of choice helmet.❤ great vid cant wait for part 2.
@GregoryBamber
@GregoryBamber 11 дней назад
Ian I've built a few bicycle choppers and tricycles with forks between 3ft and 4 ft long. More fun than stock bland bicycles, lol.
@stevebarcellos3497
@stevebarcellos3497 10 дней назад
Total Compliment on the 1st bit of welding music!
@fullcustomIan
@fullcustomIan 8 дней назад
Thank you! Its a fun vibe!
@jean-louismaduro9633
@jean-louismaduro9633 10 дней назад
The master at work i have learned allot watching from aruba 🇦🇼
@Seedinc111
@Seedinc111 7 дней назад
Ian is a GOAT.
@user-wk1rh9pt6t
@user-wk1rh9pt6t 11 дней назад
mini chopper trike? so cool. I want one.. very much worth watching after a 15 hour day.
@fullcustomIan
@fullcustomIan 8 дней назад
We are happy you enjoyed it. Thank you for watching.
@user-ni2ff5xf6g
@user-ni2ff5xf6g 12 дней назад
Always love watching your videos watching you work. I always have to subscribe for some reason or another and I always like as I said previously and now I've commented. Have a good afternoon folks. Love you guys whatever you do❤ My😊
@fullcustomIan
@fullcustomIan 8 дней назад
Thank you!
@dave-uf8ir
@dave-uf8ir 10 дней назад
Got drive way wet no dust day late happy 4th guys 😊
@shotsrodder
@shotsrodder 11 дней назад
Cool build 👍😎
@douggrunberg
@douggrunberg 7 дней назад
Thanks!!
@ZonDog
@ZonDog 12 дней назад
Guy with most toys wins. It will be a nice addition to your collection Ian.😊
@severinappleton3438
@severinappleton3438 12 дней назад
Ian and partner allways good to see & watch . Nice show !
@justingreaves6769
@justingreaves6769 8 дней назад
That atc is nice af. Best looking one I’ve seen
@daveclark4103
@daveclark4103 10 дней назад
Cool break
@user-tt2lb4rd3f
@user-tt2lb4rd3f 12 дней назад
Ace McGee in the house. Mini bike chopper hell yeah I'm all in. I've had mini fever for a while now I have 10 bikes a couple of them actually run been procrastinating for a while I need to learn how to weld to go any with my mini bike endeavors thanks for the inspiration. you guys rock. Peace Love
@136092195
@136092195 11 дней назад
That`s sweet and low Mini Chopper BAD ASS you go Ian TCOMITY
@patrickscanlon1631
@patrickscanlon1631 11 дней назад
Wow looking forward to seeing part 2
@fullcustomIan
@fullcustomIan 8 дней назад
Soon. It has been crazy hot. We are excited.
@KYLEtheOKIE
@KYLEtheOKIE 9 дней назад
Sweet!
@steveroark8020
@steveroark8020 6 дней назад
Ian needs a big Dayton fan for his shop
@johnm8557
@johnm8557 12 дней назад
Oh cool, full zip sweaters!??! Ordered!! Dig the mini-bike!
@fullcustomIan
@fullcustomIan 8 дней назад
You are going to love it. Super nice quality! Thank you for your support!
@alanhibberds5792
@alanhibberds5792 11 дней назад
Going to look badass 💯
@MiniBike-kp5xk
@MiniBike-kp5xk 12 дней назад
Bought and sold 65 mini bikes of all kinds. Love seeing this !
@JohnnyJalopyArt
@JohnnyJalopyArt 12 дней назад
super fun idea!!!!!! I cant wait to see the finish!
@temahenoniania6623
@temahenoniania6623 11 дней назад
Way to go rousell team a change of pace fabricating a trike now you can do whatever you want to do yay!!@@@@😅😅😅😅
@shanewright6958
@shanewright6958 12 дней назад
Looks great 👍👍
@johnconnick3796
@johnconnick3796 12 дней назад
Nice change of pace, thank you for the upload guys 👍
@billlevassiur5891
@billlevassiur5891 12 дней назад
Great build
@toddmay1551
@toddmay1551 11 дней назад
Love your work Ian and Jamie you rock
@fullcustomIan
@fullcustomIan 8 дней назад
Thank you!
@ralphhammond8398
@ralphhammond8398 7 дней назад
Hey Mike, love the chevy , great job...Ralph
@sjsj2122
@sjsj2122 11 дней назад
I just can't wait to see Victor's Cadillac Finished I love the Build (car)
@MAD450r2
@MAD450r2 4 дня назад
First time i found your channel. Really love your 86 200x ive owned 2 85's myself Ive never been able to find an 86 wanted to see how the 6 speed transmission differs. My bad I see the dual headlight now. guess its a 350x still 86 though being white.
@edcianfarra7890
@edcianfarra7890 11 дней назад
You go Ian , whatever you do will be cool.
@dave-uf8ir
@dave-uf8ir 11 дней назад
Anticipation dang it happy 4th guys cheers 🥂 😊
@user-fw9se3gn1b
@user-fw9se3gn1b 12 дней назад
A supurb build…Love it.
@lambertyazzie7884
@lambertyazzie7884 10 дней назад
Awesome
@tazyt3388
@tazyt3388 11 дней назад
Mate very cool I built one out of a Honda ct125 it’s hilarious it’s done some very hardcore tracks here in Tasmania the vids are a laugh I just love the upcycle recycling builds just made a sidecar for a xt250 it’s terrible and brilliant hehe have fun mate cheers for your inspiration
@The.Real.Timmii
@The.Real.Timmii 12 дней назад
awesomeness!
@graemecraddock8846
@graemecraddock8846 12 дней назад
I could watch this guy for hours
@tonylewis4489
@tonylewis4489 12 дней назад
Thanks for the video, I know your super busy right now ...much appreciated 👏
@fullcustomIan
@fullcustomIan 8 дней назад
You are welcome. We are itching to get back to work, but the heat is impeding us right now.
@KaycieCarryl22654
@KaycieCarryl22654 12 дней назад
Mighty interesting for sure!
@user-jz6jn7ws2v
@user-jz6jn7ws2v 11 дней назад
....GREAT PEOPLE TO WATCH....IAN....JAMIE AND CAITLIN CLARK............
@hippynurd
@hippynurd 11 дней назад
I feel like its important to talk about the front of the springer forks. It looks like the bottom tube is pretty much parallel and inline with the head tube. You have mounted bar perpendicular at the end, the second tube fits in the middle of that bar, and the wheel fits at the top of that bar. This little bar adds trail to the steering, which is what you want for good handling, without that trail, you get a lot of flop, and its a lot of work when riding without that trail. You could even adjust the trail till you get it right by changing the length of that one bar on each side of the front of the forks where the wheel mounts.
@SRRS478
@SRRS478 12 дней назад
looks awesome
@jayburrough4308
@jayburrough4308 6 дней назад
I've finally found your channel i have been watching all of your builds on other channels
@fullcustomIan
@fullcustomIan 6 дней назад
Welcome to the community!
@klatt4057
@klatt4057 12 дней назад
Cool!!
@leemiracle6840
@leemiracle6840 11 дней назад
Love it man!
@riverrat82
@riverrat82 11 дней назад
I love everything you build 🎉🎉🎉 I just would like to see the VW get finished soon
@fullcustomIan
@fullcustomIan 11 дней назад
Things and cars take time to build. Immediacy, enjoy the process.
@riverrat82
@riverrat82 11 дней назад
@@fullcustomIan my cup runneth over
@patshes1951
@patshes1951 5 дней назад
Cool!
@521farmer
@521farmer 9 дней назад
Howdie from Canada 🇨🇦 Sk been watching ya for awhile and ya got my vote signed up for adventure and I know it's going to be fun keep it up don't have to be rich or poor just watching your project come alive thks for sharing with us mighty fine thinking time to spend building something like yours doing to many motor jobs so time to make it happin keep ya posted on my progress later 😊
@DamionGilligan
@DamionGilligan 4 дня назад
As a career body man /collision tech I find your fab skills very enjoyable to watch. I’ve watched you from the beginning. A master at your craft as an artist. I think in my opinion that a little less wife and a little more music that she so awesomely edits in would be better. No hard feelings. Great show
@fullcustomIan
@fullcustomIan 3 дня назад
Much appreciated, but we do what we want on our channel, if I want to talk, I am going to talk and not stand behind the camera like a good girl so we get more views or likes from just a few that don't like me. Just not my style, I have questions and I will ask regardless of your opinion or input. No hard feelings. Thanks for the comment 😎 ~ Jamie
@serenityseeker239
@serenityseeker239 12 дней назад
🇺🇸👍🏼😎👍🏼🇺🇸 Fabing your own Minni SugarBear forks🤙🏼
@dirtbagdarrell2008
@dirtbagdarrell2008 11 дней назад
I had a 350 X like that one when I was 12 years old. Loved it.
Далее
다리에 힘이 풀려버린 슈슈 (NG Ver.)
00:11
Просмотров 1,8 млн
I Bought One Of The Most Rare Vehicles On Earth
22:35
The HEAT is on @ Michymilling Inc. !
28:29
Просмотров 68 тыс.
ИДЕАЛЬНАЯ AUDI S2 COUPE 450 СИЛ.
45:13
Просмотров 1,3 млн
ИДЕАЛЬНАЯ AUDI S2 COUPE 450 СИЛ.
45:13
Просмотров 1,3 млн