Тёмный

MINI D2S 5.0 PROJECTOR RETROFIT | SJ (14-16) SUBARU FORESTER XT | FULL TUTORIAL | NUT & BOLT METHOD 

nolan tsuchiya
Подписаться 997
Просмотров 55 тыс.
50% 1

How to retrofit Morimoto Mini D2S 5.0 projectors into SJ ('14 - '16) Subaru Forester headlights.
0:16 Before / after output shots using same camera settings
0:25 Bumper removal
1:00 Headlight removal
2:05 Preparation for baking
3:00 Baking / opening headlights
5:00 C-light removal
7:00 Reflector removal
9:35 Nut and Bolt method explained
13:33 Projector mounting w/ angled spacers
13:51 Projector alignment
16:08 Custom wiring adapter
19:43 Find exact centerline of vehicle
23:06 Aiming / assembly complete
24:30 Rubber sealing cap details
25:01 Mounting shrouds
25:39 Trimming bezels
28:10 Pro-tip sealant channel prep
28:39 Morimoto Retrorubber installation
29:40 Reassembly
32:14 Wrap up / Glam shots
This particular vehicle is a 2016 Forester XT Touring, which just means it has an integrated factory C-light and stock D4R reflector-based HID headlights. The retrofit steps should be nearly the same for all models in this body style.
Projectors are mounted using the nut and bolt method with angled nylon spacers and JB Quik. Projectors are nearly fully recessed, with the exception of the thickness of one inner alignment nut. There is plenty of clearance between the projector and the lens. The Threaded shaft method wont work in this application because the projector will protrude forward too far with the D2S 5.0 projectors. The projectors need to be recessed further back then allowed by the threaded shaft method. No trimming is required for the shrouds, but you will have to trim the bezel.
I hope this tutorial helps people wanting to do a full projector retrofit. Questions are welcome. I had a tough time finding info specific info for retrofitting this vehicle, so I'm happy to be a reference having gone through the process.
Retrofit kit:
www.theretrofi...
Projectors: D2S 5.0 round
Ballasts: 35W
Bulbs: XB 5k 35W
Shrouds: Iris (No trimming required)
Harness: Not used (Vehicle has stock HIDs). Necessary if vehicle uses stock halogens.
Adapter for stock 12V input:
www.ebay.com/i...
Rubber end caps (110mm):
www.ebay.com/i...
Some decent threads I found online for this specific vehicle. Not much in the way of a full tutorial, but some good info:
www.subarufore...
www.subarufore... (Thx Masticator)

Опубликовано:

 

1 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 78   
@koolkevin1107
@koolkevin1107 4 года назад
As a professional retrofitter, you did a fantastic job. You did exactly what I would do for any customer and did a great job explaining it all.
@michaelcrawley9580
@michaelcrawley9580 3 года назад
@koolkevin1107 hey how much you charge for this setup plus the C lights
@royaprilsobre
@royaprilsobre 2 года назад
Is it ok to bake the headlight with clear plastic cover instead of glass? If yes, what might be the temp? Im planning to diy retrofit my hl. Thanks
@nolantsuchiya6602
@nolantsuchiya6602 2 года назад
@@royaprilsobre video said 250F for 8min, but others have experimented with different settings. No need to worry about the plastic lenses
@royaprilsobre
@royaprilsobre 2 года назад
@@nolantsuchiya6602 ty so mch for the info sir.
@kiddferr3448
@kiddferr3448 4 месяца назад
@koolkevin1107 Hi can you give an advice because I have an old Ford everest 2018 trend variand suv. What is best type of lamp can you suggest?
@jeffaguilar7788
@jeffaguilar7788 3 года назад
How this video only has a couple hundred likes is beyond me... I found it to be suuuuper helpful! Definitely makes the process seem less intimidating. I'm puting together materials for my first retrofit now! Thank you for sharing your knowledge! 🙏🏽
@nolantsuchiya6602
@nolantsuchiya6602 3 года назад
Ha, thx. Glad it was helpful. Not expecting a ton of traffic on this channel as I don't regularly upload. If it helps a few people, I'm happy.
@mercedes300ETURBO
@mercedes300ETURBO 2 года назад
You forgot to mention that while the headlights are baking the wife better not be home 😅
@incubus3286
@incubus3286 4 года назад
Just in time! Glad I've found this video before my retrofit kit arrives :D Subbed!
@Joharwel
@Joharwel 3 месяца назад
Amazing video! Curious - it looks like you only used the nylon spacers on some of the bolts on the inside of the bowl, but not others - was there a reason for this, and how did you decide which ones? I'm guessing this had something to do with adjusting the position of the lights, but I didn't pick up exactly how you did that . Thanks for making this video - it's really great, and your work was super clean.
@justincao1541
@justincao1541 4 года назад
Taking shots at Subaru for those mediocre projectors
@mal0ko
@mal0ko Год назад
Dumb question can we instead just buy the 2018 forester headlight assembly will it not fit a 2014 sj forester?
@mpecson
@mpecson 3 года назад
GO SHARKS
@vladimirpodlesak
@vladimirpodlesak 2 года назад
Awesome job! I replaced old projectors with new ones in my BP Outback, however that was an easy job - it had projectors already. But I am looking at upgrading my SG Forester, which has only reflectors and you'll be my guide :-) Thank you!
@jdrs4214
@jdrs4214 3 года назад
Nombre!!! I wouldn’t take the time to bake and cut up the stock light fixtures. I’d really f__ that up!!! I feel more comfortable upgrading the stock halogen fixtures with the better OEM DRL projector light fixtures, rewriting, hacking, and re-programming electronic modules & sh_, just to be able to power those high end luxury light fixtures. I would’ve been researching which body control modules are high end, and if they can be re-written with my car’s vin, then getting the necessary wires, harnesses, housings, tools, relays, wire picks, etc.
@LburgVAGuy
@LburgVAGuy 3 года назад
You can use a heat gun which can be bought for cheap.I've done a bunch of retrofits in the past and the baking method rarely works like the heat gun method
@kokrisda5796
@kokrisda5796 10 месяцев назад
Very interesting clip for whom that want to DIY.
@IvanV88
@IvanV88 Год назад
Where do u put solenoid cable,if i use only for low beams,its not necessery to put it,right?
@Nitewatch-xc9yz
@Nitewatch-xc9yz Год назад
I’m looking for a kool upgrade for a 2001 dodge van,, yall got any ideas
@LJimenez0185
@LJimenez0185 2 года назад
Wow, this is the best retrofit video that I’ve ever seen, I’m going to do my first retrofit headlights and definitely I’ll be doing it based on your video! Thanks!!!
@Sinerwray
@Sinerwray 2 года назад
The bmw e46 was easy to open it don't have a seal like this and never gets water in it not sure why other car companies make it like this?
@theripper121
@theripper121 9 месяцев назад
Hey... it's the bike guy....what don't you do :)
@zoilorami
@zoilorami 3 года назад
Great 👍 job! I've done some retrofitted for my friends and mine car's too
@roovslena
@roovslena Год назад
You u don't need to drill nothing if u was using the retrofit minih1
@wulfnb
@wulfnb 10 месяцев назад
Good video, explained everything 😊
@Hilariousanthony
@Hilariousanthony 4 года назад
This is gold 👌
@nolantsuchiya6602
@nolantsuchiya6602 4 года назад
Happy retrofitting
@johnbraun7632
@johnbraun7632 3 года назад
I have questions! This is an awesome job! Mind if we get in Contact!? I plan on doing this with my 14 FXT touring model!
@nolantsuchiya6602
@nolantsuchiya6602 3 года назад
Sure. You can connect through nolantsuchiya.com
@xXchetesXx
@xXchetesXx 4 года назад
Great video explaining the nut and bolt method, not a common video, greatings from mexico
@nolantsuchiya6602
@nolantsuchiya6602 4 года назад
Thanks! It does seems tough to find info on it.
@Estimated
@Estimated 2 года назад
The lights are getting ridiculous. Just blinding everyone on the road.
@theripper121
@theripper121 9 месяцев назад
When this is done right (and he did this right) this creates no more glare to incoming traffic than a stock vehicle
@adriand3753
@adriand3753 3 года назад
Check out: Subaru OFFROAD Australian Sand
@joelstanziola
@joelstanziola 2 года назад
Hi Nolan! Nice Video. I love your XXR 530 Rims, I'm thinking to buy ones for my Forester XT 2017 but I'd like to know the wheel and tire size you have on your car. Thank you
@zorsenothorse
@zorsenothorse Год назад
Tip: when splitting the light if there is loads of glue strings, get an old drill bit on eletric drill and just spin it and drag it thru it all, will collect it all on the drill bit, can put something else in there like a stick or something if you don't want to ruin a drill bit Also search clip removal pliers or Trim Removal Pliers they are exactly the same, and like $4 rather than paying the $17 or whatever they are
@jonathan5354
@jonathan5354 Год назад
Looks very OEM. Fantastic retrofit. Also you did a great job showing the process of retrofitting.
@hmoobeveryrace9
@hmoobeveryrace9 3 года назад
Best diy retrofit videos i seen so far and even show and explain the nuts and bolts methods which i was struggling to find a videos of
@nolantsuchiya6602
@nolantsuchiya6602 2 года назад
Same here, that’s why I tried to show the nut bolt method in detail. Hard to explain without good video
@dufonrafal
@dufonrafal 3 года назад
That’s a projector retrofit done right: -looks better but still OEM like -properly fitted -wider brighter and more focused beam pattern -improves visibility and aesthetic while reducing glare
@nolantsuchiya6602
@nolantsuchiya6602 3 года назад
Right on
@juanteall8668
@juanteall8668 2 года назад
I enjoyed your total retro-fit projection very nice and clearly demonstrated. I currently own a 2018 Toyota Camry SE. Now it has an LED low beam/high beam single projection system. However, I would like to convert the DRL reflector section to a laser beam or another LED, projector install. So, if you were to look up the 2018 Camry headlights you can see what I am describing to you. I think what I would like to do is get an extra set of headlights for this vehicle and try it on there first in case there may be some issues I'm not left without any headlights. Also, I was anticipating some night shots of your end results that would have been cool to see the outcome in night conditions. Otherwise, great content
@helmhurst
@helmhurst 2 года назад
thats nice man
@matiron573
@matiron573 2 года назад
You are awesome. Thank you for sharing your retrofit in detail. It is very helpful. God bless you.
@shemdecastro3599
@shemdecastro3599 2 года назад
Hi nolan why you didn’t t put the headlights in the ovenn after applying new butyl sealant?
@kurt1810
@kurt1810 2 года назад
Great job! I'm using this video for my retrofit! I've got a couple questions, I've ordered the iris shroud as well and am wondering if you had to do any trimming of the shroud? Also did you use the inner clips of the shroud to snap onto the projector, or did you cut those off and recess it even further? Much appreciated! :)
@Sinerwray
@Sinerwray 2 года назад
You can use Plastic wrap the outside plastic to protect it when working with it :)
@HarrySingh_Unfeigned
@HarrySingh_Unfeigned Год назад
Man we need a tutorial on wiring, That is the part that is tricky in my opinion.
@ryanjiji413
@ryanjiji413 2 года назад
So, Geometry has practical uses after all.
@delltan
@delltan 2 года назад
great work! you can even do a quad setup to make it insane!!
@keloduma
@keloduma 9 месяцев назад
This is so technical. I love it
@pokealex388
@pokealex388 2 года назад
This video gives me so much more confidence in doing my own retrofit.
@javiermacedo4717
@javiermacedo4717 2 года назад
Thank you Nolan for the video! Great work! Just wondering if the 4 bolts will hold the weight of the projector over time, considering the Forester is driven not only on asphalt but on trails (light off-road/vibrations). I would appreciate your comments about this.
@nolantsuchiya6602
@nolantsuchiya6602 2 года назад
It’s a year later now, and I’ve had no issues. I hope to never need to open these again. No condensation or anything so far
@DanteGaKill
@DanteGaKill 2 года назад
Bro that was a super clean work 😻❤️
@locomax5000
@locomax5000 3 года назад
Try going back to oem ballast
@johnh.george9059
@johnh.george9059 3 года назад
I learn something good
@helen10777
@helen10777 2 года назад
Best retrofit I have seen
@GuiltyMantis
@GuiltyMantis 2 года назад
Very nice Professor
@MyGoogleYoutube
@MyGoogleYoutube 2 года назад
Wow great work !
@luissastre520
@luissastre520 3 года назад
Direct to the NASA.
@jackcatalig
@jackcatalig 3 года назад
looks neat nice job
@NN-xj3ef
@NN-xj3ef 2 года назад
Excellent Job!
@MrManushe
@MrManushe 2 года назад
great tutorial
@ffh2303
@ffh2303 2 года назад
Great video
@teligon
@teligon 3 года назад
From where did you get the nylon spacers, and what sizes did you use?
@nolantsuchiya6602
@nolantsuchiya6602 2 года назад
Just hardware store.
@amjathkhan2004
@amjathkhan2004 3 года назад
It would have been perfect had you shown the projector in action.
@ricardomolina4605
@ricardomolina4605 3 года назад
Uh he did at the beginning. Look again.
@kenlai2200
@kenlai2200 3 года назад
hi good day really nice your video, can u please tell me the name of the glue you use for sealing the headlight,
@ricardomolina4605
@ricardomolina4605 3 года назад
Look on theretrofitsource.com or lightwerkz.net
@panjiii6
@panjiii6 3 года назад
Its a butyl rubber sealant
@hakgar
@hakgar 2 года назад
As a mathematician I congratulate you on the geometry tricks! 👌
@panjiii6
@panjiii6 4 года назад
Nicely explained! If I can only hire you to do it on my '17 premium! Hit me up! Lol
@nolantsuchiya6602
@nolantsuchiya6602 3 года назад
Wish I had the time.. Ha!
@panjiii6
@panjiii6 3 года назад
@@nolantsuchiya6602 Believe it or not im actually doing it. Just started on opening the headlights. Hows your d2s 5.0? did you get the CBI 5500k as bulb? hows the output as of now? your video is really helpful.
Далее
Лучше одной, чем с такими
00:54
Просмотров 341 тыс.
МОЮ ТАЧКУ РАЗБИЛИ...!
39:06
Просмотров 428 тыс.
Morimoto D2S 5.0 Bixenon Projector Review
14:18
Просмотров 64 тыс.
HOW TO: HID Projector Retrofit Guide
18:59
Просмотров 172 тыс.
The Game-Changing Nut & Bolt Retrofitting Tool You Need
20:42