Hi - thank you for the informative video. I’m new to mini z’s and recently bought an MR 020 Awd for drifting. Do you know why the front wheel is narrow and the rear is wide for drifting? If they were the same width, It would make it a lot easier to shop for wheels and tires :). Thanks
If they have wide wheels on the back it only to suit the wide of the bodyshell . Look for an and narrow x narrow body shell then you can run all the same wheels
You know how to make the rwd mini z drift i have the same wheels and the gyro but i dont know what motor i need or what but it still has issues im new to rwd miniz normally play with 1/10 so need some help with the little guy thanks and great video
You will find it very hard to drift a red mini z as they are not designed for it and have bad steering angle . Really if you want to do red drifting you need a glracing gld for a xrx
I don't think the 787b would fit and if you did get it on the 787b wheels won't work as you need awd wheels so you would have to find the right offset awd wheels
The tyres I found the best are the mini z 20 shore radial tyres . You can get hold of the narrow and wide radial tyres off eBay . I hope this helps . I would buy a set of narrows and a set of wide and that way you will have a spare set . I found when running radial tires I use a bit of double sided tape to stop them from slipping of the rims . Plus that way it won't ruin your wheels by gluing them
@@adamsrcs7205 I really appreciate your help but do I need rims as well I don't understand which kind cause of the offsets ,I don't think I can add tyres to my wheels