Minn Kota Terrova Trolling Motor DIY Install | Pro Rigger Tips

Подписаться 345 тыс.

Просмотров 124 тыс.

50% 1

Professional boat rigger Andy Kratochvil of FishLectronics walks us through a step-by-step installation of a new Minn Kota Terrova electric-steer trolling motor. The Terrova is arguably the most popular multi-species trolling motor and comes equipped with all the latest and greatest technology in terms of GPS-enabled boat control, networking, and mechanical operation.
FEATURED PRODUCTS
• TROLLING MOTOR - Minn Kota Terrova, 60'', 24v with i-Pilot Link GPS and MEGA Down Imaging: wired2.fish/MinnKotaTerrova
• QUICK RELEASE BRACKET - Minn Kota MKA-32: wired2.fish/QuickReleaseBrack...
Kratochvil tackles upgrading a used aluminum Lund 1875 Pro-Guide tiller and shares several tips and tricks to speed the process and ensure the job is done right the first time. This video is aimed squarely at the "do it yourself" angler that likes saving money and enjoys tackling some hands-on projects.
Good luck, and we're sure Andy wouldn't mind handling the project if it's outside your comfort zone.
► SUBSCRIBE for more AWESOME FISHING TIPS: wired2.fish/YTSub
► SHOP WIRED2FISH GEAR HERE: www.wired2fishgear.com
FOLLOW US HERE AS WELL:
► www.wired2fish.com
► / wired2fish_official
► / wired2fish
► / wired2fish

Спорт

Опубликовано:

18 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 88

@ctpeac0ck Месяц назад

Ive literally watched this three times before I start installing mine. Fantastic video!

@ross7684 Год назад

Absolutely the best tutorial I've seen on MinnKota's trolling motors! Thanks a bunch; I have a Terrova on order and will be installing it in the spring.

@Spaghetti83 11 месяцев назад

1:09

@TheNickbena Месяц назад

Probably the best tutorial for anything I've seen ever lol

@ricwayneoutdoors Год назад

Best video I’ve seen. You are straight to the point and you covered every aspect of installation that is needed

@Wired2Fish Год назад

Thanks Ric. The goal was to give the trolling motor buyer a comprehensive walk-through on how to attack the job, from a seasoned installer. Andy is very thorough. Good fishing to you.

@DOGFOODACTUAL8541 Год назад

My motor and Hummingbird were just delivered 30 mins ago. You just answered every question I had and some I never thought of. Thanks for a great tutorial!

@jeffreylash891 Год назад

I just installed my Terrova, awesome tutorial on installation. Thanks Jeff

@MrTeamzud Год назад

I just purchased this same trolling motor and after watching this video I am pretty confident I can install it myself. Thanks, Great explanation

@saraloke949 10 месяцев назад

Two years later this motor is going strong ru-vid.comUgkxBZWgzfpS2Jj7JqIHyaSZjyVHNUgCKCBf Just uploaded a video of it after 2 years. We use it probably a dozen days each year on our small raft.-original review- We got this motor the other day and tested it out. I don't have anything to compare it to, but it seems good to me. It has all the features advertised - the motor housing is metal. We will see how it performs longer term and I will revise this review if needed. Some initial observations:- Good thrust, moves our boat around really well- It comes with a circuit breaker but no switch - so there's no way to kill the motor other than yanking the connection off the battery. I installed an inline switch.- The mount bracket is plastic and I worry it might break- There are a number of plastic parts that I worry about, but the most important ones are metal or some kind of composite

@americanpatriotforge979 2 года назад

Great Detailed Professional video, thank you Andy!

@georgezura 2 года назад

This video is perfect timing as My Terrova ILink just came in today!! Great video very easy to follow! thank you for the time you put in to make this video.

@Wired2Fish 2 года назад

Glad it was helpful George. Good luck fishing and enjoy your new Terrova!

@michaelglodek4435 Год назад

Excellent tutorial with common sense approach Paced instruction with accurate procedures Well done!

@cebeers 2 года назад

Excellent video! Thank you for the great tutorial!!

@baischgolfer 2 года назад

Excellent video, much appreciated.

@paulp2186 2 года назад

Great video!! I have the exact motor and bracket, Im just waiting for some warmer weather to unwrap the boat and get this installed. This will be very helpful

@Wired2Fish 2 года назад

Perfect, exactly what this video was intended for.

@rakeremis6730 Год назад

Thanks man. Found this video helpful for me

@hugopoirier7746 2 года назад

Best installation video online, many thanks

@johndominguez7404 Год назад

Great instruction video help me a lot with a lot of questions I have planning on picking up one of those Minn kota Terrova upgrading from a 12 volt system to a 24 volt system

@infiniti6576 2 года назад

Perfect explanation!

@JFoxTN Год назад

Excellent instruction, thank you. I'll be installing my Ulterra tomorrow and appreciate the good advice.

@Wired2Fish Год назад

Thanks! How'd the install go?

@JFoxTN Год назад

No problems with the install with my brother-in-law helping. Going out tomorrow to check it out and calibrate. Thanks again for the good video! All the best.

@glenndaugherity6187 Год назад

I wish his shop was closer to me I’d have him do all my work ! Probably the most knowledgeable rigging shop ever !! But I’m 9 hrs away !

@Wired2Fish Год назад

Hi Glenn, we hear ya. Talented riggers are not everywhere.

@glenndaugherity6187 Год назад

@@Wired2Fish We'll be in GR in October I'll stop and say hi !!!

@terrycollins7549 Год назад

... road trip 🤪

@gpharned Месяц назад

Excellent! Thank you

@ralo4265 2 года назад

Good stuff Andy! 👀 ☕️ 🔧🪛 👊🏼💯🇺🇸 Thanks for the tips my friend!

@jameswood3544 Год назад

great tutorial

@carlcarl9290 Год назад

Great tips!!

@dalemccluskey7746 2 года назад

Great Job, thanks!

@Wired2Fish 2 года назад

Thanks for watching Dale. Are you doing an install yourself? If so, let us know how it goes and if this vid is/was helpful.

@LowBrowFishing 2 года назад

I didn't know they made a specific model for pontoons. I just installed a Minn Kota Edge on mine. It's not anything fancy, but it works great. It was pretty easy to install, too.

@Wired2Fish 2 года назад

Thanks for sharing. I did some custom mods to mount a Minn Kota Ulterra on our family pontoon. The Minn Kota Talon Pontoon Edge Mount Kit was pretty effective and easy to install too.Minn Kota Talon Pontoon Edge Mount Kit: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zs6A1OL7dXw.html

@TW14137 Год назад

You make great installation videos, they are a big help. Thank you! I'd like to add a quick detach bracket to an 80# Ultrex 60" that is mounted on my 1875 Pro-V. Can you recommend one over the other...the aluminum MKA 52/62 vs the Poly MKA-23? I had the alum version on a Terrova that was on my last boat, but didn't remove it often. I am leaning towards the MKA-23 for ease of removal, thinking there are a couple small things on the boat deck that could interfere while trying to slide the MKA-52 in place. My Ultrex 60" is the largest the MKA -23 is rated for, and I'm wondering if it will be robust enough. Spent about my time on the Great Lakes.

@shyguy8240 2 года назад

Good video! I had the same problem with the roll hitting the trolling motor bracket at the launch while loading depending how steep each launch are. One way to bring up the tip of your hull up once you cranking up and you know your boat need to be elevated more. You get in your truck and move forward 10-20 inches and that will bring your front hull up above the roll.

@Anzev-PRO-FISHING Год назад

Hello, I ran into a problem with loosening bolts on Minn Kota Terrova 80 /US2/IP 72 24V. Tell me the marking of the hexagon, I can’t find it in stores.

@rswinamer9132 2 года назад

Great vid. Any idea for plug & receptacle on flat deck of pontoon boat? Looking for clamshell type solution to keep water out of receptacle. Thanks

@redfisher4132 2 года назад

Fantastic video. I just installed a Terrova today, and I sure hope you meant to say "24 inches", rather than 24 feet at 18:09 mins.

@timtullio1210 Год назад

Yea, 24' away caught me off guard too. I was just looking through the comments to see if anybody else called him on that.

@stevenjones618 Месяц назад

I guess on real boats.. lol lol heck 24ft is bigger than most inland fishing boats lol

@jayhill2200 Год назад

Hey Guy...great tutorial. What do you use for anti-seize?

@zoomzoomgt Год назад

Can you do a video. On the powering up setup if you just have a tinner boat (that doesn't have existing outlet)

@countrylivn 2 месяца назад

Great video. Unless I missed it however, you never mentioned need for 60 Amp breaker? I am installing 12 V Terrova so will be installing 50 AMP breaker.

@stevepage8508 Год назад

I have watched your video a couple of times. I used the quick release bracket everything in the video. I noticed when you turned on the power. You did not check the tester for the batteries, should that be green or red. I'm showing red, I have power and good voltage to all my sources. batteries are at full charge?? Thanks for the awesome video

@anthonywilliams7432 Год назад

Do I need the quick release bracket? Also does it matter which side of the bow the shaft is on? I've upgraded to the Terrova and I currently have the edge. Tracker or Bass Pro put the shaft just left of the bow. I can't put my motor all the way down when it's on the trailer. Yours looks like it would be on the right. Any suggestions? Thanks.

@austinpalmer4564 2 года назад

I noticed that on the power cord you left all of the slack in the cord and had it tied together up near the trolling motor. Is there any reason a guy can't cut the power cord shorter when making the connection to the plug and avoid the need to keep everything tied together up near the motor?

@michaelwilson486 11 месяцев назад

Can you use the same mounting bracket on the Terrova and Riptide?

@bfamily6209 10 месяцев назад

How would you fix the left side cover and the red and black cords if the trolling motor did hit the trailer roller when loading???

@brixelus Месяц назад

I have an ulterra 45 inch shaft. How do I get the shaft to go all the way down? It leaves 3” of shaft on top. I need at least 2 of those. Any ideas?

@rayy1988ra Год назад

So the instructions say to mount it so that the shaft is a 1 1/2" away from the gunwale, u just mounted the cutout flush or a little past the gunwale which would be alot closer then a 1 1/2 if ur flush, do u know why they say this in the instructions have u ever had any problems the way u did it, id rather do it like u and have the least amount hanging of the side as possible...mounting it right now so a quick reply would be awesome...thanks

@BrandonUrbaniak Год назад

Is this a service shop? And if so can I get the name and location. I'm looking to possibly have this same motor with 2 locators installed this spring. Thanks for the help

@teerzette1541 11 месяцев назад

It's a great video, was able to install the whole system along with 24v power supply system. I have a question regarding the gps sensor thought. Will it draw power from the 12v battery during everything is off & boat is resting? Is it constantly looking for signal ? i have no shut off button for it and its hooked straight to 12v. Currently had replaced the 12battery and looking for reason why its losing alot of juice even if the boat is sittin in garage. Thanks in advance & happy fishin!

@joshuasmith2689 2 месяца назад

Yep, you'll need to install a power switch.

@markbelanger1093 2 года назад

How do you recommend plugging old holes left in an aluminum bow from an old trolling motor? Every motor seems to have a different hole pattern, leaving boats looking like Swiss cheese.

@Wired2Fish 2 года назад

Hi Mark, structurally, there isn't an issue with holes. If you were concerned about that, you could add a piece of plywood to the underside and add some silicone to the screw/bolt heads to maybe add some rigidity and seal the holes to prevent water penetration to the front cubby. Alternatively, a dab of silicone into each hole is a good water penetration prevention measure.

@BillORights1 4 месяца назад

can i hook it up to a lowrance fish finder?

@MsKindaSorta Год назад

Hi, I may have missed it… how long should the trolling motor shaft be for that boat?

@joshuasmith2689 2 месяца назад

I went for 60". Better to err on the side of too long than too short, especially since it is easily adjustable.

@mrb9502 2 года назад

Thanks for this Vid... Are you A Minnkota dealer? If not who did you purchase your Terrova from ?

@Wired2Fish 2 года назад

Yes, Andy is a Minn Kota dealer. The boat owner had the Terrova in his possession -- not sure where it was purchased.

@meadrenalinejunkie Год назад

So the puck will shutdown once the motor is down if its not connected to a power switch? I am hoping I can put it to a switch but if not then I am stuck going directly to the battery, not sure how long that power cord is? I am waiting for my motor to arrive, I ordered it a week ago.

@joshuasmith2689 2 месяца назад

Puck stays on, unfortunately. Need to install a power switch.

@steveduncan131 Год назад

I installed my troll motor I have a beaker on front battery and 20amp fuse on back battery the 20amp fuse keeps popping at a higher speed on the troll what should I do to Salve this issue thank you sir Your video was a big help for my install one last ? I did get the heading sensor with the troll motor In The box should I call them or do they all not come with them ?

@hydroguy8 Год назад

The Terrova 80 under minimal load, full power (#10), will draw almost 42 amps. The recommended breakers a 60 amp-this motor will require max 56 amps under max draw, heavy wind, river current, chopping thru weeds, etc. Get rid of your 20 amp fuse + install the 60 amp breaker on your positive output wire, near the batteries

@waxy1309 Год назад

does i-pilot and spot lock only work if you have the hummingbird helix?

@joshuasmith2689 2 месяца назад

Any models that say One Boat Network. New Helix, Solix, and Apex control heads and only select trolling motors.

@Jb-vc5fq Месяц назад

Mount the heading sensor at least 24 inches away from the trolling motor or ferrous metal…not 24 feet away.

@aigarsaigars7493 Год назад

Hello, Can I connect heading sensor on the same battery with Terrova?

@Wired2Fish Год назад

Thanks for asking. A 12-volt power source powers the Heading Sensor, so it can't be powered off of the same batteries as the Terrova, which is available in a 24v or 36v option (not 12v). You'll want to run a lead to your 12v electronics or dual-purpose marine cranking battery.

@mikedog9746 11 месяцев назад

Can you put the heading sensor next to the trolling motor??

@joshuasmith2689 2 месяца назад

You might have some interference if it is too close.

@baddogone42 Год назад

Which hummingbird finder would be the best choice for this ?

@Wired2Fish Год назад

The depends on your budget and the desired capabilities. The HELIX lineup are always solid but if you want a touchscreen, then SOLIX is the way to go.

@baddogone42 Год назад

@@Wired2Fish Thanks

@stelianpetcu4908 3 месяца назад

Can I use this troling motor without foot pedal installed?

@joshuasmith2689 2 месяца назад

Yes, foot pedal is optional. Can control the trolling motor with your remote, your phone, and the control head.

@paul.aragon 2 года назад

Any news on when/if Minn Kota will have its own brushless trolling motor?

@Wired2Fish 2 года назад

Hi Paul, we're not aware of anything.

@user-he3gb4nj6k 8 месяцев назад

Why after my motor is in the stored mode and it is paired the prop does not spin?

@michaelclem1476 2 месяца назад

I’m about to wire mine up,this won’t be as fast for me 😂

@joshuasmith2689 2 месяца назад

I'm in the same boat. 🤞🏻 Here's hoping.

@migueltrujillo5932 2 года назад

I don't thank I want that little round thang use for jogging, also did not see him install any circuit breaker in there, don't you need to have one for keeping from frying all the goodies down the line?

@joshuasmith2689 2 месяца назад

They're individually hooked up to a fuse box.