Тёмный

Mirka Deros | dust free sanding 

Ultimate Handyman
Подписаться 525 тыс.
Просмотров 109 тыс.
50% 1

Get the Mirka Deros here- fave.co/1JSWsn8
The Mirka Deros is a sander with a difference. This machine can be used with either the 125mm or 150mm backing pad. Once connected up to a suitable vacuum or dust extraction unit you can sand comfortably with much less noise than a traditional sander and much less dust. Because the sander uses Abranet abrasive discs the machine can remove much more dust from the work area without the abrasive clogging up like you get when using traditional sanding disks. The mirka ceros is a similar machine, but uses a power supply unit instead of mains voltage.

Хобби

Опубликовано:

 

12 июн 2015

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 87   
@mikes6844
@mikes6844 7 лет назад
I've owned mine for about a year and it is without a doubt a superb piece of kit. I purchased the full kit and the Mirka vacuum extractor together. A good deal from a Dulux trade centre promotion. It is dust free sanding and I'm still amazed at zero clean up and dust free working atmosphere. Only Mirke and Festool seem to be taking dust extraction to the level other manufacturers seem reluctant to do. Yes Festool and Mirka are not cheap but clearing up comes at a cost that can be re-couped many times over especially at the end of a long day. No regrets. Great vid - thanks.
@scrimperuk
@scrimperuk 7 лет назад
Thanks for the video, this does look to be a superb tool and looks to be light and easy to use but is a bit pricey for amateur use. I have a Metabo version which I use for woodwork, I wonder if this could be used for sanding filled plaster walls?
@cheechU38K
@cheechU38K 9 лет назад
what a superb sander! I would like to use on car repairs as fillers can be so dusty they clog up discs in no time. Great for health too especially others around without masks. 😃
@ultimatehandyman
@ultimatehandyman 9 лет назад
cheechU38K Yes, it would be ideal for that. I'm sure they make a cheaper version that runs off compressed air, which would be ideal in a garage ;-)
@123boat
@123boat 6 лет назад
Best sander I've ever bought. 10/10
@ultimatehandyman
@ultimatehandyman 6 лет назад
Its a great piece of kit ;-) Thanks for the comment
@123boat
@123boat 6 лет назад
Ultimate Handyman great channel by the way. Love picking up new tips 😃👍🍺
@ultimatehandyman
@ultimatehandyman 6 лет назад
Thanks ;-)
@louiesworkshop2023
@louiesworkshop2023 3 года назад
I was so tempted to go with this sander but after reading many reviews the issue of reliability seemed to appear again and again Simon the end I opted for the festool 150 I hope I have made the right choice!
@ultimatehandyman
@ultimatehandyman 3 года назад
I'm sure the Festool will be fine, as they are a premium brand. Thanks for the comment 👍
@shedlife1783
@shedlife1783 7 лет назад
Hi do you use the 5mm or 2.5mm orbit version? Is one better for sanding walls / filler than the other?Cheers
@ubertuber463
@ubertuber463 9 лет назад
I used to have 2 of these the big one small one and they kick ass and I also had a transformer with it
@franquiciadrautocasa6006
@franquiciadrautocasa6006 7 лет назад
Que buena herramienta. En México la estamos utlizando con nuestras franquicias. Saludos
@ultimatehandyman
@ultimatehandyman 7 лет назад
Gracias por el comentario
@ubertuber463
@ubertuber463 9 лет назад
The only thing I found when I used to have one if you had it on the highest setting any pressed down to hard the green light turns red which showed that the motor is burning out and the reason why they are so light is because the powerpack for battery is not on the actual Sander it is on the other end of the black cable
@ultimatehandyman
@ultimatehandyman 9 лет назад
Über Tuber I think that model is the Mirka Ceros isn't it? I believe that has a power supply with it, unlike this model which is direct to mains voltage. Thanks for the comment ;-)
@charleshines6155
@charleshines6155 4 года назад
With those other holes on the side that pad seems to be similar to Festool's Multijetstream pads. I would like to find pads like those for my Ryobi 18 volt and my Ridgid R2610 (This is not the similar one with 4 screws holding the pad). I just know there must be someone out there somewhere who makes a pad like this. The difference is they can't call it Jetstream or Multijetstream. It would probably have a strange model number or an odd sounding name because of that. I would love to get a Mirka or Festool sander but they are both very expensive brands. I do like German quality and the Festools do last a long time. We had some sanders, saws and routers that were all Festool. The quality is so much better than anything else I ever had. I would expect similar things with Mirka if I got my hands on their tools. Is it me or do Mirka sanders seem similar to 3M? They probably share the same compact style and the similarities fade away after that but I just happened to notice how similar they look.
@ultimatehandyman
@ultimatehandyman 4 года назад
I would imagine that many of these are made by the same company, but branded differently! Thanks for the comment 👍
@AN-fn5ft
@AN-fn5ft 8 лет назад
Hi, I've watched most of your videos and they are very helpful. Thanks for sharing your useful tips and advice. I have an angle grinder and I want to sand a metal cabinet which has rust on it. I'd also like to paint it. What disc can I use on the angle grinder to use flat on the surface to sand ?
@ultimatehandyman
@ultimatehandyman 8 лет назад
+Abdullah Alomgir You can use a flap disc or a sanding disc, but you have to be very careful as a grinder rotates very quickly whereas a sander orbits. Leave the grinder in one spot too long and you can scratch the metal.
@AN-fn5ft
@AN-fn5ft 8 лет назад
Thanks for the reply
@ultimatehandyman
@ultimatehandyman 8 лет назад
+Abdullah Alomgir You are welcome ;-)
@-_AjB_-
@-_AjB_- 9 лет назад
I got the chance to try one of these last week when the Axminster rep brought it along. I must agree, it's a revolution in sanding. I definitely want one. Then I saw the price!!
@ultimatehandyman
@ultimatehandyman 9 лет назад
***** I must admit that I was looking at a Dewalt or Bosch orbit sander, until I saw some posts in the forum by the painters and decorators who rave about this machine. I'm delighted with the machine, it's a much better way of sanding. Thanks for the comment ;-)
@-_AjB_-
@-_AjB_- 9 лет назад
And where may I ask did you find best price.?
@ultimatehandyman
@ultimatehandyman 9 лет назад
***** The best price I could find was rest express £370
@-_AjB_-
@-_AjB_- 9 лет назад
Thank you
@ultimatehandyman
@ultimatehandyman 9 лет назад
***** You are welcome ;-)
@richardjones5534
@richardjones5534 9 лет назад
I've been seeing a lot about these are they related to festool in anyway, they have a few similarities
@ultimatehandyman
@ultimatehandyman 9 лет назад
Richard Jones I don't know, sorry. A lot of powertools are made under different brand names under license though so it is possible that they are even made in the same factory.
@zedman442
@zedman442 9 лет назад
Very nice bit of kit. Good review. That box however looks suspiciously like a festool tool box. The locking mechanism looks identical.
@ultimatehandyman
@ultimatehandyman 9 лет назад
Zed Man I must admit only having seen Festool gear, I have never used it as it's too expensive for me- although I believe it's very good quality gear. A lot of tools seem so much like other tools that it often makes me wonder if they are all made in the same factory- just with a few minor adjustments. I'll try to check out the Festool stuff the next time I go to a trade show etc. Thanks for the comment
@craigscott00
@craigscott00 9 лет назад
The tool box is made by a company called Tanos. They supply to the tool manufacturer including makita, festool, fein and bessey. As far as I'm aware they are different companies although fein and festool have done cross licencing.
@ultimatehandyman
@ultimatehandyman 9 лет назад
craig scott Thanks for the info ;-)
@gorringeman
@gorringeman 2 года назад
If you hooked your sander up to a conventional hoover would it damage it?
@ultimatehandyman
@ultimatehandyman 2 года назад
It probably would not do it a lot of good, I would just get a cheap vacuum from a DIY outlet for jobs like this. I bought a Wickes vacuum a few years back and it has really been abused with saw dust, paint sanding dust and plaster dust etc. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-S_fRJStKCu0.html&t
@SuperWayneyb
@SuperWayneyb 9 лет назад
Did everything come in with the machine or are hoses e.t.c extras?
@ultimatehandyman
@ultimatehandyman 9 лет назад
wayne burgess It came with the case, 125mm backing pad and 150mm backing pad, some Abranet abrasives and the spanner. I had to buy the vacuum hose and universal hose adapter separately. It's a brilliant piece of kit, I love sanding now ;-)
@mack1609
@mack1609 4 года назад
great video. just wondering how this sander still performs years after this video.
@ultimatehandyman
@ultimatehandyman 4 года назад
Its great, it still performs well- I love using it! Thanks for the comment 👍
@mack1609
@mack1609 4 года назад
@@ultimatehandyman thank you for your reply.
@tobybarker6808
@tobybarker6808 7 лет назад
Many sanders can be hooked up to a vacuum....why is this any better (especially considering the price!)?
@ultimatehandyman
@ultimatehandyman 7 лет назад
This machine uses an abrasive that does not clog, it also has lots more holes than abrasive paper so it removes more dust than a traditional sander and vacuum.
@trig
@trig 9 лет назад
Would be nice to see a comparison with a Festool sander.
@ultimatehandyman
@ultimatehandyman 9 лет назад
Michael Tricker I'll keep my eyes open for a Festool one and if I can get one at a decent price I'll compare them ;-)
@classicalcarpenter4297
@classicalcarpenter4297 8 лет назад
+Ultimate Handyman This is the only tool that has replaced any of my Festool equipment. It is lighter, les noisy and easier to control. I have both Rotox (90,125&150) as well as the 150/3 and 150/5 Festool sander - they are good, but not as good as the DEROS or our older CEROS.
@ultimatehandyman
@ultimatehandyman 8 лет назад
+Tom Weston Thanks for the info Tom, much appreciated ;-)
@classicalcarpenter4297
@classicalcarpenter4297 8 лет назад
Should you wish to do a comparison between Festool and CEROS/DEROS I can lend you mine. I am only down the road from you in Bromley Cross, Bolton.
@ultimatehandyman
@ultimatehandyman 8 лет назад
Thanks Tom, that's a kind offer. I'll send you a message if I ever get time to do it ;-)
@MrSonyCity
@MrSonyCity 9 лет назад
"You can barely hear it"... *Turns on the extractor unit* WHOOOOSOSXOSSHSHSHSHHSDHSHSH!! I guess the lack of sander noise reduces the overall noise lol
@lastdesignboris5650
@lastdesignboris5650 8 лет назад
Mirka actually have 2000 and 4000 grit as well
@ultimatehandyman
@ultimatehandyman 8 лет назад
Thanks for the comment ;-)
@docsavagexl
@docsavagexl 9 лет назад
Can i get one shipped to the US?
@ultimatehandyman
@ultimatehandyman 9 лет назад
docsavagexl They sell these all over the world, this is their US site - www.mirka.com/en-US/us/?epslanguage=en-US You should be able to find a stockist from that ;-)
@docsavagexl
@docsavagexl 9 лет назад
Thx Mate
@ultimatehandyman
@ultimatehandyman 9 лет назад
docsavagexl You are welcome ;-)
@cheechU38K
@cheechU38K 9 лет назад
I hope they can make dust extractors less noisy, it's the problem nowadays with power tools and environment.
@ultimatehandyman
@ultimatehandyman 9 лет назад
cheechU38K To be honest I don't have a dust extractor, I just hooked it up to my Wickes wet and dry vacuum cleaner. Thanks for the comment
@robocop2asap
@robocop2asap 6 лет назад
Hi well disappointed that you do not demonstrate this tool on a drywall tools purchased i have like this one still fill the room full of dust in seconds.
@ultimatehandyman
@ultimatehandyman 6 лет назад
It's excellent on plaster- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6wa_m_RKWjw.html
@robocop2asap
@robocop2asap 6 лет назад
Yes have seen some one on here i do like this model many thanks for reply all the best to you great job.
@pointmade6945
@pointmade6945 8 лет назад
more for polishing less for sanding
@ultimatehandyman
@ultimatehandyman 8 лет назад
+Point made I have never used it for polishing, but it's excellent at sanding. I recently decorated a wall that had significant surface damage. I filled all the damage using Gyrpoc easi-fill, then sanded it using this sander and the finish was like it has just been plastered. Thanks for the comment ;-)
@pointmade6945
@pointmade6945 8 лет назад
for fine sanding on a soft wood, try to use on a oak whit a 40 grip and to remove some old damage whit deep scratches polyurethane varnish
@whotusay750
@whotusay750 7 лет назад
Fffff- 460 squids ‼️😳
@ultimatehandyman
@ultimatehandyman 7 лет назад
Yeah, it's not cheap but if you do a lot of sanding it is well worth the large price tag as it brilliant at sanding and there is hardly any dust at all.
@justgivemethetruth
@justgivemethetruth 9 лет назад
Just looked it up ... it had better be good ... it's over $600 American. Wow.
@ultimatehandyman
@ultimatehandyman 9 лет назад
justgivemethetruth Yes, they are not cheap but they are brilliant. I always hated sanding with a passion as the sand paper soon get clogged and it's normally a dusty job but with this tool it's quiet (apart from the noise of the dust extraction unit), the abranet abrasive does not clog up and almost all the dust is removed from the work area. Thanks for the comment ;-)
@anthonyromano8565
@anthonyromano8565 7 лет назад
damn 230 volts, not US friendly.
@ultimatehandyman
@ultimatehandyman 7 лет назад
They now make a 110v version of this machine but it will be designed to run at 50Hz for the UK. They might make a 120v 60Hz version for the US!
@anthonyromano8565
@anthonyromano8565 7 лет назад
This sander almost makes me want to do drywall again. It seems it converts 100-120 volts to 22 volts DC so it probably doesn't matter what the hertz is.
@landyman918
@landyman918 7 лет назад
Please do not waste your money on this very poor quality rubbish, mine only lasted 2 years then only fit for the bin. I have Dewalt, Bosch and Metabo sanders that are over 18 year old and still work well. This Mirka Deros has a design flaw, The motor rotates and shorts out the electrics.
Далее
A CLEAR WINNER! / Mirka DEROS Vs 3M Xtract
10:46
Просмотров 66 тыс.
Infinity Cutting Tools - Mirka Abranet Sanding Discs
4:27
Я ПОКУПАЮ НОВУЮ ТАЧКУ - МЕЧТУ!
39:05
Introducing the Mirka Deros Orbital Sander
5:28
Просмотров 80 тыс.
Пов: Несёшь цветы маме🥺
0:31
Просмотров 1,9 млн
Как то так🤷🏼‍♀️❤️
0:31
Просмотров 778 тыс.
Шашлык вкусный
0:57
Просмотров 6 млн