I’m not sure which is worst. Because in my case now the watter goes into the groundwatter directly… but I have no option at the moment. 😁 Do you think draining into a watter way it’s worst?
@@istillplaywithcars on ground is way way better. It breaks down in the sun and is filtered by the microbes in the soil. Defenitly the way to go. Drain goes into streams and the sea and pollutes.
Hi! Yes, it’s actually from another brand, it’s not made by karcher. But there are plenty of options, you just need to check the connection type on your karcher. These differ also with pressure washer production year. Good luck with this! It really makes life easier. 😁👍
dont forget to fully rinse your foam canon bottle then run clean water for at least one minute through your canon after snow foam solution it will make them last a lot longer
I have an aftermarket bottle and metal nozzle. Makes ALL the difference. Just one question. I also have the K4. Is it normal when you put on these better foam bottles on the gun it still sprays on high?
Aaah, now I inderstand. Mine has no adjustment. It’s a very old K2 model without pressure control. But I would use it at the highest pressure setting, because if the pressure is high the foam is thick. 😁
There are two red rubber parts in the bottle cap/holder, at 2:05 you can see it... I lost one... They pack spare 2 rubbers but what is it for, is it necessary to there? Probably it is but I can not find where to buy more spare ones... If you turn foam cannon upside down they will fall off, it' easy to lose them...
I see... mine are still attached. I’m not sure, but I assume they let the air go inside the botle when the foam is produced. To avoid creation of vacuum inside botle. I will have a closer look at the botle. 👍
Hello mate, could you link the correct adapter to fit the stiga 345r pressure washer? I’ve been looking but can’t seem to find one. If you can’t find it for the mjjc lance can you link a good one? Thanks.
Hi! Sorry if my explanation was not understandable! Yes, I’ve replace the one from the cannon with the smaller one which comes in the box. The reason: smaller orifice helps less powerfull presure washers make thicker foam. If your pressure washer has more than 130bar you can use the bigger one. 😁👍
hey, what pressure washer would you recommend in using the mjjc foam cannon pro where i dont have a water source (other than a bucket) and no access to a power socket? I live in a condo and dont have such luxury of having a garage !
Hi, I also don’t have a garage yet, but I’m working on paperwork to start build one... 🤦♂️ Tbh, I don’t know if the pressure washers are made to absorb the watter from a bucket. I have no idea. So I’m sorry but I cand give you an advice here... 😞
Very nicely done. Thanks for sharing. I have a Karcher K2 compact. Do you need to order the adapter for the Karcher K2 separately or does it come with the canon?
Foarte tare chiar vreau sa-mi i-au un karcher , acest produs se găseste doar in Romania ? Stiu că aici in UK s-au şi in alte țări nu stiu exact karcher'ul pe care vreau sal iau vine fără acest "cap" .
👍🏻 experienta mea cu karcher k2 a fost chiar buna. Il am de vreo 3-4 ani. Lancea de spuma se livreaza oriunde in lume, in functie de stocul din depozite poate sa se livreze din Europa sau din China. Ai link in descriere, vezi acolo toate detaliile. 👍🏻
Yes, it’s really nice for the price I’ve paid. I will maybe go for a more powerful one, when this one will not work anymore. But it does the job right now. 😁
Hey, where did you put hot water? Just mix it with shampoo or what? And, did you also connect the water hose into your karcher machine? So there is 3 things, water from hose, and mixture between shampoo and hot water in foam tank? Am i right? Please help, i just need more thicker foam. Mine was Karcher K3.450
Hi! Yes, I add hot water in the foam cannon, so I mix the sampoo. The water hose connected to the karcher is cold, so normal tap water. What kind of foam lance/cannon are you using?
Yes. With the original karcher foam cannon the foam will not get better. You need to buy other foam cannon, I can recommend the MJJC foam cannon pro, it’s great value for the money. 👍
Hi! When you order it from the website (see link in video description) you will chose the cannon with the karcher adaptor. The smaller nozzle comes with all lances, so yes! 👍
When I ordered the foam cannon I also specified which pressure washer I have. So they sent the addapter together with it. Addapter has the same connection head as the original one from any Kaercher accessories.
Hi! When you go the the site you will see that in the list you can order the one which fits your pressure washer. Mine is a Karcher K2, I think it’s one of the last in the list. (Link in the description). Other than ordering the right cannon with right connection / addaptor to your pressure washer, everything is plug&play. 👍
Do you have the posibility to exchange the pressure washer nozzle? If yes, just have a look if the connection looks the same as mine does. I expect that it should work. 👍
I would say buy the k2. It’s not all about the pressure, it’s more to quality of solutions you use. I also recommend washin your car with the 2x buckets method. So this means the pressure washer is just for pre rinse and 1st foam wash, so you don’t need that much pressure. But offcourse, if money is not an issue, you can go for k3 or k4. I hope I could help 😁
Yes. That nosle is made for less powerfull pressure washers. I did the same for my old lance and it worked fine. What kind of lance do you have? Is it old?
You’re right. But the solution I have is really really cheap, so I don’t expect to act so good if it’s diluted too much. i will buy a better solution once this will be finished. 😁