MK1 Caddy 3.2 VR6 Swap. Good to go!

Подписаться 38 тыс.

Просмотров 29 тыс.

50% 1

We finished up and dyno the 3.2 VR6 swap we did in this MK1 Rabbit Truck (Caddy). This ends the 3 part miniseries. You definitely don't want to take this thing for granted out on the street. Power to weight wins with this MK1s.
Peloquin 02J Limited Slip Differential
comotorsports....
CO Motorsports "Fast Coast" Hoodie
comotorsports....
Camera Gear
Sony ILCE7M2K/B A7 II Mirrorless Camera with 28-70mm Lens. SLR, Black, Compact
amzn.to/39XR3A4
Sony FE 20mm F1.8 G Full-Frame Large-Aperture Ultra-Wide Angle G Lens
amzn.to/2TQ1YpP
Seagate Portable 5TB External Hard Drive HDD - USB 3.0 for PC Laptop and Mac
amzn.to/2WflqxT
Peak Design Cuff Camera Wrist Strap Black (CF-BL-3)
amzn.to/3d4JJED
GoPro HERO8 Black - Waterproof Action Camera with Touch Screen 4K Ultra HD Video 12MP amzn.to/3b2sW39
GoPro Dual Battery Charger + Battery (HERO8 Black / HERO7 Black / HERO6 Black)
amzn.to/2QibEau
GoPro Rechargeable Battery (HERO8 Black/HERO7 Black/HERO6 Black)
amzn.to/2Uf8rKa
AmazonBasics DSLR Camera and Laptop Backpack Bag - 13 x 9 x 18 Inches, Black And Orange
amzn.to/2IOMDj5
ULANZI VL49 2000mAh LED Video Light w 3 Cold Shoe Mounts Type C Charging
amzn.to/2wUnL6N
DeKaSi 55-in-1 Action Camera Accessory Kit
amzn.to/2wYDX70
FitStill Screen Protector for GoPro Hero 8 Black
amzn.to/2wdcv5x
Tools
Lincoln 3601 Pressurized Oil Drain
amzn.to/2IQWYLe
MaxxHaul 80681 Solid Rubber Heavy Duty Wheel Chock with Eyebolt, 2 Pack
amzn.to/2wYwMvL
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyL...
Music promoted by Audio Library • Finally - Loxbeats (No...

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@psavel274 4 года назад

The old TT with the Borla??? I remember when TT and autotech were some of the only vw/ audi tuners. Its physically impossible to make a vr sound bad. Man do I miss mine! Great work on the swap. The ecu relocation to the interior is good for piece of mind instead of worry about it possibly swimming in the raintray. Caddy's rock.

@COMotorsports 4 года назад

Thanks for the comments, much appreciated

@justindtackett 2 года назад

Killer. I admire the work. And love the Cadddy Wookie.

@COMotorsports 2 года назад

Thanks, this thing looks a lot fresher now as it's been freshly painted.

@paranormalextract4976 3 года назад

Sick steering wheel in Clayton's mk1. Had one in my saab SPG, loved it.

@johnmoser2689 3 года назад

Extra cool caddy nice work

@hoost3056 2 года назад

Man that thing sounds so good!

@TokyoCollins 4 года назад

at the foolishly low curb weight i bet that thing is absolute rocket ship! well done dude!

@COMotorsports 4 года назад

Yeah MK1's don't need much power to be extremely fun.

@petrolhead8851 2 года назад

@@COMotorsports I remember back in 2003/2004 my cousin had a red mk1 caddy with all the neuspeed suspension for it, sitting on 15” silver bbs mesh wheels that were factory from vw, had a 16v motor in it with some head port work some nice cams, full 3” exhaust, computer was chipped, that thing ran beautiful! Was fast for the time. I’d like to build me one just like his again

@COMotorsports 2 года назад

@@petrolhead8851 get to work

@July.4.1776 8 месяцев назад

@@COMotorsports… I have an ABA that only had 1,000 miles on it from a wreck that was removed years ago in mine. It’s a blast to drive and still gets 32 MPG.

@chrisclow6885 4 года назад

The more the videos come, the more comfortable Dave seems to be getting in front of the camera haha. Great video fellas, keep it up!

@COMotorsports 4 года назад

Definitely not as many taked that's for sure. But it's still a struggle. Not comfortable in front of the camera.

@chrisclow6885 4 года назад

Ah, don't worry about it. Yas are doing great. Keep em coming

@COMotorsports 4 года назад

@@chrisclow6885

@mateomorizio2777 3 года назад

Oh hell yeah thats awesome man :-) :-) :-)

@COMotorsports 3 года назад

It looks fresh now as it's been completely resprayed. We'll do a follow up video on it at some point.

@pacocaddy3097 4 года назад

Super projekt 👍 😄

@jvogler_art4708 9 месяцев назад

Disappointing no one has put one of these in an off-road Toyota. I guess that’s cause there’s so much pride in jdm engines that no one would ever dare.

@nitronamous 3 года назад

That old truck should have a 1.8t or 2.0t. 300+ hp to the wheels easy but not sure it could handle it! That VR6 tho..always sound killer.

@COMotorsports 3 года назад

It can handle it, but the power this made is more than enough for most in this weight of vehicle.

@elinunez6797 3 года назад

Good job ✅🏁

@bikermonster8354 4 года назад

Awesome job😎👍 Hopefully i get some day this kind of engine for my A4 B6😎👍 Best Wishes and support from old germany

@COMotorsports 4 года назад

Much appreciated, and best of luck.

@brandonb2985 3 года назад

Question! Are you guys running the stock a3 returless fuel rail to a fuel filter with a built in fpr? I'm looking to run a 3.2 touareg engine I'm prepping for my mk2, and was considering using the stock return less fuel system (mk4 r32 fuel rails are becoming harder to come by, so I'm looking at my alternatives). Can I run a returnless system on an mk4 r32 ecu? I've found very little information on going this route, everyone always seems to run a return and fpr in the bay.

@COMotorsports 3 года назад

This swap was from a WE which was returnless, which is how we ran this car (with proper filter/FPR.

@ruinedmk4142 4 года назад

❤️❤️❤️

@mauriciovallejo7880 4 года назад

Do you happen to have note of what wires are used from the 3.2 harness? And what they wire into on the mk1 doing the same swap rn

@COMotorsports 4 года назад

Each on is slightly different, depends on chassis the engine came out of. We generally just work through the harness per application.

@rjack151 2 года назад

I need this in my life lol

@Continental719 Год назад

Did you have to use a MK5 Gas Pedal? If so where did you get your pedal adapter from?

@Sma11time. Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZcxSEBJw65E.html there ya go

@mechanicalmanny494 4 года назад

Nice video

@COMotorsports 4 года назад

👍

@Cynical709 4 года назад

Thay gli thou. Owns the same one. :)

@COMotorsports 4 года назад

Build videos coming soon on that one.

@GTiGLiTN 4 года назад

Nice truck! Was this running performance software or immo delete? I would have expected around 210 stock.

@COMotorsports 4 года назад

Most definitely is running both. No way it would work in this car without it.

@lurkpdx3497 3 года назад

Oh my gawsh

@roccoracer 3 года назад

What is the general cost to do this swap on a mk1? My scirocco would love it.

@ThisIsMeTakingAction 2 года назад

I just paid $1400 for the motor… the kit from Eurowise with some extras are $5700… I’m buying injectors, chains and some other refreshers for the engine $1400. Transmission I’m getting is refurbished $1500. Limited slip is $900. Labor to install is $3000 not including extra tuning. Definitely not cheap but I’m going for it..

@mer689 4 года назад

Are u guys doing videosof the rest of the build and how it preforms on the streets? Sorry for my bad writing. Gretings from sweden !

@COMotorsports 4 года назад

Our part of this project is done (for now). It’s now back in the customers hands and he’s enjoying the wookie noises. Thanks for checking out of videos and commenting!

@tyroneclinton1991 3 года назад

I'm planning this swap on a mk1 golf with a few extra add ons like a more modern cluster. Any tips and pointers on wiring and things I might run in to as I'm located in South Africa so coming to you guys wouldnt be possible.

@COMotorsports 3 года назад

You will miss something, that's my pointer. So check everything 2-3 times.

@Piston206 3 года назад

What transmission did you use ? And do you guys work by appointment for swaps I’m willing to travel and stay a couple days and then drive back to Vancouver

@COMotorsports 3 года назад

It would likely be cheaper to ship vehicle. She yes no problem. This car 02J trans.

@texusmad6202 3 года назад

So in Europe the 3.2 V6 from the Golf R32 already has 250hp straight from the factory...

@COMotorsports 3 года назад

That is crank HP, which is about 210-215whp. So this is a very good gain, especially on 91oct.

@michaelbetancourt3954 4 года назад

Love your channel what price range would u say that is and have you've done one with dsg swap

@COMotorsports 4 года назад

Price comes down to which parts are used, what's upgraded at the time and what the donor parts cost.

@michaelbetancourt3954 4 года назад

@@COMotorsports what would you ball park mk5 r32 swap with AWD and dsg for caddy I have full car for swap

@COMotorsports 4 года назад

@@michaelbetancourt3954 if you're interested in us doing the install for you. Drop us an email with all the specs of the car you have, what it's going in, and what parts you have and we can work through a price for you. Every build is different.

@creekaddicted 4 года назад

What size are the P Slot alloys and tyres? Looks good guys!

@COMotorsports 4 года назад

I don't know what they were. Didn't even pay attention to them sorry.

@ericcurlett811 4 года назад

Sean Cassidy they look like 185/60/14 tires

@tyronedean1812 4 года назад

What’s faster out of the MK1 1.8T 20vt running 220hp and the MK1 3.2v6 running 227hp ?

@COMotorsports 4 года назад

1.8T Never lose. lol In all serious, that would just come down to weight really, the VR is a bit heavier though so that's a disadvantage, also definitely don't take any sudden turns in it. :)

@tyronedean1812 4 года назад

CO Motorsports I’m currently swapping out a k04 20vt set up for an r30T so even more weight 🤪

@COMotorsports 4 года назад

@@tyronedean1812 clearly not doing much cornering. :)