MK7.5 Golf R Rear Brakes : Pads, Rotors, and Stainless Steel Lines

Подписаться 19 тыс.

Просмотров 17 тыс.

50% 1

In this video, I am changing the rear brakes: pads, rotors, and I’m also upgrading to stainless steel brake hoses. I decided to go with Ferodo pads, Zimmerman rotors, and StopTech brake hoses. I’ll also show you how I decided to deal with installing brake pads that do not have the wear sensor that would plug into the harness on the passenger side.
Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful!
Here’s that neat little brake checker tool: amzn.to/3E0VYzL
Here are the rear brake pads I installed: www.fcpeuro.com/products/audi...
Here are the rear rotors I installed:
www.fcpeuro.com/products/audi...
Here are the rear hoses I installed:
www.fcpeuro.com/products/audi...
Here is the fluid I am using:
amzn.to/3BYZdFY
Here are the carrier bracket bolts I replaced:
www.fcpeuro.com/products/audi...
Table of Contents:
#motul
#zimmerman
#ferodo
#stoptech
#brakes
#golfr

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@glenndemelo328 2 года назад

Thank you for this video. I’ve only seen videos of people removing the the whole calliper and that just make the whole job harder so thank you again for explaining everything to the T.

@carbonio28 2 года назад

Awesome job 👌👌 doing mine pretty soon 👏

@dorkultra 2 года назад

great video! The rear rotors on my '18 mk7.5R started getting deep grooves around 12k and I ended up replacing at 15k miles when they were grinding. It was really surprising that the dealer thought it was normal. Replaced with Stoptech rotors and EBC red pads. I'll have to look into using the OBDeleven to enable the disc drying function, but the replacements have been spotless for the last 25k miles.

@Golfr2020 2 года назад

Cool! Very informative 👍

@jonnyskynet4464 2 года назад

hi mate..can u tell me VW number part to buy new bolts to replace older? Thankjs

@KasamS Год назад

To preven loosing brake fluid, use a brake pedal depresser while changing the lines

@damercerterker8176 Год назад

Like a brick? 😂

@KasamS Год назад

@@damercerterker8176 maybe a few 🤣, but fr makes it so much easier no fluid leaked out when i changed my lines and bleeding it was straight foward

@pyj1119 2 года назад

What model of obdeleven did you use?

@gerald9760 Год назад

Did the exact method twice until I had new fluid come through and now my pedal is still spongey. I can’t find any leaks also. Anybody have this problem?

@BioHackGaming 2 года назад

Hey just wanted to verify the rear brake pads listed in the description show up as may not fit my 2019 7.5 golf r. On the website it says up to 2018 mk7 r

@EVERYTHINGcpo 2 года назад

They are the right ones. You can search the OE part number to verify. I just think the didn’t update the page to add newer vehicles past 2018

@nxbrennan 2 года назад

I don't understand the need for OBDeleven, does the electronic parking brake just need to be in the off position or is that moving it farther back than normal? Thank you.

@EVERYTHINGcpo 2 года назад

It opens it completely.... so farther back than just the parking brake "off".

@GTI_CHHA 2 года назад

Excellent video. One comment, you don't require a special tool (like with a MK5) to compress the piston back-in, even a normal C-clamp would do. The reason is simple: the special tool is only required when there's a pure mechanical handbrake function (which auto-levels to compensate for wear). In this case, the parking break is performed mechanically by the electro-engine, which you had already re-wounded with VAG-COM. Long story short: just push back the piston, no rotating! If you look into the VW Factory repair document, it will telle you the same thing. Oh yeah, no need to remove the calliper carrier, just slide the disk out..

@GergelyGardonyi 2 года назад

Just did my Mk7 Golf R, can confirm, no need to remove the calliper carrier, just slide the disk out and the new one slides back in.

@kalvnhobbz Год назад

Wish I'd known you didn't need to remove the caliper carrier before my last brake job, would have saved me a lot of time! The same isn't true of the front brakes, is it?

@GTI_CHHA Год назад

@@kalvnhobbz Indeed, for the fronts you do need to remove the carrier to remove the disk.

@Mike-gz4xz Год назад

That comment was very useful thanks for that .

@sHpAaKu316 Год назад

Swap the lines first so you have a chance to clean everything before asembly. You didn't clean the hub beofre new disc install.

@gagelaughlin7028 2 года назад

What App did you use?

@EVERYTHINGcpo 2 года назад

OBDeleven

@afurisit 2 года назад

Holly Molly u removed the carriers for nothing to replace the rear discs. That's not necessary at all. They come out sliding past them.

@howado 2 года назад

Didn’t you see him replacing carrier bolts?

@EVERYTHINGcpo 2 года назад

Facts. Finally had a chance to verify this. Thanks!

@lewiscannon8213 2 года назад

Only the smaller soild rear discs will slide out the carrier's without removing them.

@AlexKretzschmar Год назад

If you're using VCDS to retract EPB the instructions can be found here. wiki.ross-tech.com/wiki/index.php/VW_Golf_VII_(5G/AU)_ABS_Brakes#Basic_Setting