Тёмный

Modified Prado 150: Adventure Rig 4Dads 

TOYS4DAD
Подписаться 394
Просмотров 6 тыс.
50% 1

Ever wondered how to take Australia's #1 favourite shopping-trolley (the Toyota Prado) and transform it into something that is a proper Adventure-Rig for Dads? This video will give you a blow-by-blow review of all modifications good, bad and ugly. Definitely uncensored and totally unsponsored, you will hear some realities of modifying a highly capable factory vehicle into "something more". If you're looking to build a family overland vehicle, this video is for you. Enjoy!
Also, here are the links to (almost) every single thing on my 150 series Prado. Other vendors can also supply many of these parts. Please note that this may not suit your vehicle, so choose carefully!
Wheels - ROH Trophy: roh.com.au/wheels/trophy/
Tyres - Falken Wildpeak AT3W - www.falken.com.au/product/wil...
Suspension - Dobinsons (ex-Kakadu): www.autopartsco.com.au/dobins...
Dash Cam: Black Vue 900X-2Ch www.amazon.com.au/BlackVue-DR...
Quad-Lock magnetic wireless phone charger: www.quadlockcase.com.au/colle...
Bash plates & underbody protection gear - KAON: www.kaon.com.au/protection/?g...
Roof Rack: Rola TITAN rola.com.au/1800mm-titan-tray...
MaxTrack roof rack mounts - KAON: www.kaon.com.au/folding-maxtr...
Stainless rear fold-down table - KAON: www.kaon.com.au/ultimate-rear...
Lithium Battery - DCS 75Ah: www.deepcyclesystems.com.au/p...
Optima D27F Crank Battery: www.batteryworld.com.au/D27F-...
Air Compressor mount - KAON: www.kaon.com.au/arb-rear-air-...
Air Compressor - ARB CKMA12: www.marks4wd.com/ckma12.html
UHF Antenna mount - KAON: www.kaon.com.au/rear-aerial-l...
UHF - GME XRS-370: www.gme.net.au/au/fixed-mount...
Apple CatPlay wireless kit - CarlinKit: www.amazon.com.au/CarlinKit-W...
Redarc DC/DC Charger mount - KAON: www.kaon.com.au/dcdc-charger-...
DC/DC 25A Aux Battery Charger: Redarc 1225D: www.redarcelectronics.com/au/...
Trailer Brake Controller: Redarc Tow-Pro Elite: www.redarcelectronics.com/au/...
Bull Bar - MCC: www.mcc4x4.com.au/collections...
Spotlights - STEDI Type-X Pro: www.stedi.com.au/type-x-pro-l...
Light Bar - STEDI 41 Inch slimline: www.stedi.com.au/st3301-pro-4...
Winch - Runva 12000lb: www.runvawinch.com.au/runva-e...
Oil Separator / Catch-Can - ProVent: dieselcare.com.au/product/toy...
Fridge: Engel MTV-45 40L: engelaustralia.com.au/shop/po...
Drivers Door "Always-In" Accessories:
- Leatherman Supertool: www.leatherman.com/super-tool...
- ARB Tyre Deflator: recoverygear.com.au/products/...
- GME PLB (personal locator beacon): www.gme.net.au/au/plb/
- Stedi magnetic LED floodlight: www.stedi.com.au/t1000-led-ta...
#toyota #Lc200 #lc300 #prado #overlanding #landcruiser

Опубликовано:

 

6 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 46   
@marcturner5809
@marcturner5809 Месяц назад
For the 250 I would definitely recommend a secondary fuel filter system, absolutely worth the cost and will save your engine from water or bad fuel. 250 will be awesome to own.
@Neocodeauthor187
@Neocodeauthor187 3 месяца назад
Thank you for your honest & concise run down on your build. Very informative, and for a beginner, it's a great starting point for referencing.
@Boz_TOYS4DAD
@Boz_TOYS4DAD 3 месяца назад
You're very welcome!
@rich9903
@rich9903 Месяц назад
I bought and built up ('accessorised') my '22 VX based on a gazillion RU-vid videos (including videos from Ronny Dahl's and Harry Fisher's 'Fire-to-Fork' channels) that I had watched prior to my purchase and now that I'm all but done with my build, I have to say I think I got pretty close to everything as a package meeting my expectations. Last time I dared to look, the total cost of all the accessories I had installed is around the $50K mark which is bloody scary but hey, I've worked hard all my life too. My end game was always specifically setting my Prado up for touring and towing a hybrid caravan (to 'one day' travel the country with my family) rather than for doing any '4 wheeling' in it so first up, I ensured I installed a pre-rego 3.5T GVM upgrade (2" lift Dobinsons suspension with airbags) when I first got it. Whilst I ended up with a similar'ish setup as your rig (got a bunch of Kaon gear but steered well clear of the underbody protection - additional weight), I purposely avoided the dual battery issue by using a portable power station (Bluetti AC200Max + 800W portable solar panels) for all my camping needs but it also doubles as an overnight power source for my kitchen fridge (fully charges by day using my 10.5kW home solar) so I effectively have the thing running 24/7 and it works great!! The thing I really need to get onto is to have my entire setup (tow rig and caravan) professionally weighed when fully loaded which could be a little scary but I did have minimising my weights in mind throughout my build. Anyhow as a new subscriber, I look forward to seeing more of your videos
@Boz_TOYS4DAD
@Boz_TOYS4DAD Месяц назад
g'day Rich. sounds like you've got yourself one helluva rig. if you're in WA hope to see you on the tracks at some point! cheers, Boz
@Yipmanhands
@Yipmanhands 2 месяца назад
Top video mate, if only all of the stuff on youtube was as honest as this instead of thinly disguised sales pitches. Well done sir.
@oggyoggy1299
@oggyoggy1299 3 месяца назад
I can highly recommend the KAON rear shelf that hangs from 3rd row seat grab handles. It takes HEAPS of stuff. All that gear in your door pocket and rear table caddy would go up into it.
@Boz_TOYS4DAD
@Boz_TOYS4DAD 3 месяца назад
I agree. I had the rear shelf plus the cargo barrier but sold them both. Found the barrier more restrictive than useful but I do miss the top shelf.
@DavidAnderson-vt8iq
@DavidAnderson-vt8iq 3 месяца назад
Great video. Subscribed. Thanks for sharing the mistakes as well as the hits.
@D.s182
@D.s182 6 месяцев назад
Hi Brian, nice vid. Love how honest you are mate 🤙🏽🤙🏽
@Boz_TOYS4DAD
@Boz_TOYS4DAD 6 месяцев назад
Thanks 👍
@jasonwishart6800
@jasonwishart6800 6 месяцев назад
Thanks. Appreciate the rundown. I just got my 2023 Prado GXL and am yet to modify it in any way, so is good to see what works in the real world.
@Boz_TOYS4DAD
@Boz_TOYS4DAD 6 месяцев назад
Glad you got something out of it!
@darrenhodgson2026
@darrenhodgson2026 6 месяцев назад
Great vid mate, thanks for that. We are just about to start on our 23 VX. Tanks for your honest comments.
@Boz_TOYS4DAD
@Boz_TOYS4DAD 6 месяцев назад
No problem 👍
@abeedsulehri2580
@abeedsulehri2580 4 месяца назад
Great vid mate. I am thinking to add rola racks as my first mod and thats how i got here. Good stuff!!
@Boz_TOYS4DAD
@Boz_TOYS4DAD 4 месяца назад
thanks mate. I was initially sceptical of the Rola platform racks as they're an "assemble yourself" option, but that's actually a strength as I Loctite'd all the screws and replaced their hardware with 316 grade washers and bolts. You won't be disappointed.
@Harpoika
@Harpoika 2 месяца назад
Thanks for the valuable information. I'm spot on your target audience with the same model land cruiser. Got mine without all the bells and whistles. Not even seat heaters unfortunately.
@Boz_TOYS4DAD
@Boz_TOYS4DAD 2 месяца назад
Glad it helped
@gilesy7169
@gilesy7169 5 месяцев назад
Good vid mate and a well set up 4x4👍
@Boz_TOYS4DAD
@Boz_TOYS4DAD 4 месяца назад
Glad you enjoyed
@holyparikrama
@holyparikrama 2 месяца назад
Very informative video. Subscribed to your channel. I have a 2018 GXL upgraded to leather trimmed seats. They are almost the same as Kakadu or VX. Worthy upgrade.
@stuartferguson7947
@stuartferguson7947 Месяц назад
Same ~ GXL with the kit, got the 17s but missed out on some of the nice safety stuff from the VX; to late now. Agree Kaon stuff is very high quality, great service too.
@rohanbevan3500
@rohanbevan3500 Месяц назад
I'd be a little bit suss on that UHF handpiece location if the side airbag goes off. From memory there's a section in the user manual. Otherwise nice job from another Prado dad.
@Boz_TOYS4DAD
@Boz_TOYS4DAD Месяц назад
yeah I get that a lot. I checked with the stealership and they assured me that the way the airbag deploys there will not be any issue/interference.
@fully.fledged
@fully.fledged 5 месяцев назад
Nice video mate 👍
@Boz_TOYS4DAD
@Boz_TOYS4DAD 4 месяца назад
Thanks 👍 please like and subscribe!
@markpalladino4848
@markpalladino4848 6 месяцев назад
Great video and tips thanks
@Boz_TOYS4DAD
@Boz_TOYS4DAD 6 месяцев назад
Thanks for watching!
@mariuscoetzer8553
@mariuscoetzer8553 5 месяцев назад
Hi Brian, great video mate. Could you give some info on your suspension upgrade and why you won't suggest doing this upgrade.
@Boz_TOYS4DAD
@Boz_TOYS4DAD 5 месяцев назад
hi mate and thank you. In my mind there are only 3 reasons why someone would consider a suspension upgrade: 1: they need a GVM upgrade; 2: they need to compensate for a bullbar/winch weight and 3: they need more clearance. They could have a combination of all 3 of course. In my experience, I installed a bullbar and winch, and wanted a tad more clearance for offroading (which I do less than 5% of the time). So.... with my next 4WD, unless I install a bullbar (50/50 at this stage) and winch, it is hard to justify the cost of a suspension upgrade when I do little offroading (as a percentage). If you use a spotter, choose a better line, and build up the track you should get away with factory height when offroading - unless you're doing insanely technical tracks. After I upgraded my suspension (noting that I have the Kakadu model with KDSS and factory airbags at the back), the car just wouldn't align properly. Drove me mad... The engineers at Toyota etc. are pretty smart, way smarter than me. Any mod you make is a compromise.
@robins2069
@robins2069 3 месяца назад
Hi great video. Re your DCS aux battery. What battery surround have you used? Do you think it helps keep the heat away from the battery? Does it seal against the bonnett? Cheers. Robin
@Boz_TOYS4DAD
@Boz_TOYS4DAD 3 месяца назад
Hi - I used a regular stainless steel tray supplied by ORE (off road equipment) hard mounted to the inner fender from memory.. Isn’t heat shielded (much) and definitely doesn’t seal to the bonnet. Not required. The DCS batteries are bullet proof as evidenced by their weight- heavier than what you’d expect for a 75Ah lithium.
@jonliapis538
@jonliapis538 4 месяца назад
I love the black grill and trim. Where did you get them or who makes them?
@Boz_TOYS4DAD
@Boz_TOYS4DAD 4 месяца назад
That’s just a can of black Plasti-dip, a little painters masking tape, and 45 minutes work.. easy peasy!!
@inderjhajj5323
@inderjhajj5323 3 месяца назад
Hi Brian great video mate could you please give me some info about suspension on your Kakadu. I Just bought mine wanting to do a suspension upgrade but no one wants to touch it. Also I am from WA. Will be great if you can point in right direction. Thanks
@Boz_TOYS4DAD
@Boz_TOYS4DAD 3 месяца назад
Have a chat with Ian and the boys over at City Discount tyres in Joondalup. They’re in close collaboration with Malaga suspension and they can definitely handle a Kakadu
@darrenhodgson2026
@darrenhodgson2026 Месяц назад
Who or how did you black out your chrome on the front , thanks mate. 👍
@Boz_TOYS4DAD
@Boz_TOYS4DAD Месяц назад
Easy .. can of Plasti-dip
@hectorcastro9198
@hectorcastro9198 2 месяца назад
Good morning here for Texas, I am reaching out to get a question answer. I own a 2023 Gx 460 and will want to go over landing, I don’t like the over built and extra heavy vehicles here. I love the rear door with the tire carrier will that fit my Gx 460 here?do you know where can I order one ? Thank you! Love your channel
@Boz_TOYS4DAD
@Boz_TOYS4DAD 2 месяца назад
Hi Hector and thanks for your nice comments. I found this which seems retrofittable for your situation www.jwoffroad.com/products/lexus-gx460-tire-carrier-1
@hectorcastro9198
@hectorcastro9198 2 месяца назад
@@Boz_TOYS4DAD thank you, seen it before but I wanted to see if I can fit the prado door instead. Love your build. I am starting my built to mimic more the way the overlander are build in Australia. Here in the states everyone over kills their vehicle and don’t let the natural capabilities of the vehicle shine. Love the content and will be following for inspiration.
@Wednesdayat11
@Wednesdayat11 4 месяца назад
i find it interesting that you hated the front shocks of the kakadu. lessions learnt I suppose. I know a fella that went from a GXL to Kakadu and couldnt be happier. Each to their own
@Boz_TOYS4DAD
@Boz_TOYS4DAD 4 месяца назад
yea I found the adjustability wholly ineffective. Actually had the stealership check to see if the adjustable shocks were working. All I can say is the Dobinsons were a massive upgrade! Highly recommended for all models.
@Wednesdayat11
@Wednesdayat11 4 месяца назад
@@Boz_TOYS4DAD what was bothering you about the adjustbility? They don't vary in height as much as stiffen and soften rebound.
@Boz_TOYS4DAD
@Boz_TOYS4DAD 4 месяца назад
hey @@Wednesdayat11 yea i'm aware of that. my 2nd car at the time was a GolfR, with proper electromagnetic fluid adjustable dampers. I've owned a couple of M-cars also and they too had this system. The prado system is a simple electric motor on top of the shock that winds down/up a bolt that adjusts the stiffness of the shocks. Comparatively speaking it was a poor attempt and barely noticeable. Plus, one more thing to go wrong. The Dobinsons were a set and forget adjustable shock that massively improved the ride of my car (along with the 40mm lift)
Далее
80,000kms later PROJECT PRADO
24:49
Просмотров 154 тыс.
RIG RUNDOWN || Check out this  Super Shiny PRADO
28:44
Yeni Özbək Mahnisi Yoxsa Vefali Reqsi? 😍
00:36
Просмотров 1,3 млн
Все кругом Миланы... 🤣
00:12
Просмотров 131 тыс.
UNDER $50K Lap of Australia - PRADO BUILD REVEAL!
14:21
Prado 150 False Floor Build
7:15
Просмотров 4,5 тыс.
2024 Ineos Grenadier Review // Why It's Worth $70,000
24:59
12 Mistakes Every New Off-Roader Makes
14:59
Просмотров 286 тыс.
Toyota Prado Off-road Modified Episode 95
25:36
Просмотров 71 тыс.