Monitor Modification For Street Fighter Arcade1Up Pandora's Box or Raspberry Pi Install 

Thank you for the video. I bought on Amazon and it came with no directions. Awesome video.

I’m making a Cruis’n USA cab complete with steering wheel and pedals, and even a plastic racing seat like the arcade had. I’m going to be using an N64 with the three Cruis’n games. I bought this adaptor for the purpose of hooking up my N64 to a 1up monitor. I guess for sound external speakers can be used. I guess you remove the Arcade1up game board and metal enclosure to hook up the adapter board to the monitor like you showed. I’m going to leave the kickplate off and put the pedals on the floor inside the cabinet to sit closer to the screen and put my feet inside the bottom of the cabinet for the pedals.

Worked for me, thanks!

very helpful!!! Thanks!

Mine doesn't ever work the LED light turns green and then turns red for a nanosecond and repeats.

Do you ship to the UK? I basically want all the stuff to convert my sf cab to a pi3, sanwa sticks and buttons. Do you sell these as a whole package?

So question, the cables coming from the monitor on mine aren't long enough to get the board to mount to the wood. Is it safe to pull those cables for more slack?

Yes we ship worldwide

Hey Shane so would using this board allow me to duplicate the display from the 1up machine to my PC via El Gato Capture card? Trying to figure out how to duplicate the 1up gameplay for a convention I am doing in a few months. Thanks.

Just wondering... Is there a way to adjust contrast, and brightness on the stock LCD panels in the A1U cabinets? I noticed a hole above the old PCBA placement location. It's directly between the upper plastic mounting brackets. Is there a knob behind it, or is it just an alternate mounting hole for the PCBA, for when the monitor is installed in a different orientation. Thanks. :)

is the GEN 2 kit on your site good to use with my Marvel countercade? the vid conversion board i currently have is a 2av-1vga-1hdmi-ttl-50pin-lvds-acc pcb800099-v.9 the pin connector is way too big for the 8in monitor.

I bought one and my stock sound isnt working with the wire (got it working with an amp through the hdmi converter on the ps2). The marquee is also not lighting up (is that supposed to happen?) i tried the wire hooked on next to the audio cable as thats where it fits but wont light up. Also the colors even after adjusting are a bit too desaturated even after adjusting the color temperatures. Is there a way to add saturation to make it more vibrant and not just brightness and contrast and white balance? Im using my ps2 with hdmi.

I turned the arcade one up on with the 60 in one Jamba and the light turns green and then red can you please help me with this problem

I just saw the new pacman 40th anniversary cabinet. Is it possible to swap out the PCB in my 1st generation cabinet to get all the games offered in the 40th anniversary cabinet? Thanks.

Hi so with this new board, how does the joystick 🕹 works.? Because the original board has a wire that goes from the board to the joystick. I change my to the new board and now I don’t know hoy to or from where to connect the joystick

Why wont my Marquee light up now after this mod ?

Great video, thank you. But my board keeps blinking green :(

thanks so much. was wondering which way to connect it.

I have a question about the ground screw.... can I use the same screw from the old card and screw the monitor controllers and ground cable on the wood panel just below the monitor? Practically, ground screw from the old card --> ground cable --> monitor controller card --> wood, this way nothing is moving.

How do I connect a Dell 19 inch monitor to the converter board for Raspberry pi4 in Arcade 1up cabinet

How can I get the audio to work on my arcade 1 up using this board when connecting my Pandora’s box the speakers on the arcade

how do you configure the raspberry pi with the Dell 2007FPB 20 inch monitor resolution?

Great vid...

I dont wanna switch to a pi or anything. I simply want a different screen but to use the stock 1up arcade system.

Is it possible to connect the speaker on the arcade machine to the speaker header on the board or do I need to use a separate audio amp?

Would I need this if I wanted to use an original PCB instead of a pandora or raspberry? It seems like I would.

Great video but you didn't finish and show where the ports go my Marquee wont light up now and the speaker is barely noticable

Where can you purchase one of those driver boards

What happens if u use the other hole for the ground?

Question I'm running a splitter with my power and my Marquee plugged into the HDMI converter board to light up the Marquee the light won't go off lol no switch i need another switch I'm just asking will it over jest then system???

I bought the LCD/HDMI screen driver board and intend to hook it up to a Game elf 750 for my arcade1up mod. My question is what cables do I need to connect from the PCB to the LCD/HDMI VGA driver board?

I have tried with a card similar to but I only get half a picture on the screen and it is very faint and in green colors, what is the reason for this?

I plan on buying this board to connect my stock monitor to a PC and then run 3rd party fight sticks from the PC, will this work?

Do u sell the Pandora box or Pi I’m trying find a one stop shop for all to mod my street fighter

where does the ribbon cable from the joy stick hook box up into?

how do I detach the back metal place from the LCD screen cover because what happened was I went to mount the LCD controller board on the back of the arcade1up and it didn't have enough slack to put it underneath oh, so I pulled it a little bit and I disconnected the connector that goes into the cable into the TV screen

What about the controll panel where do you plug it in

Is it possible to hook a PS2 slim up to this driver board? If so what cables/adapter do I use? Thanks for any/all info

Do you sell or know of a 30 pin cable extension? On my mortal Kombat cab the 30 pin is just too short and won't allow me to place on the wood below .

I don't understand what I've done wrong. Watched Eta Prime's video on this and ordered his exact parts and no luck. Made sure everything is connected properly a dozen times and I've even used different hdmi plugs. Because of all this, my arcade 1up doesn't even have a display when plugged properly back into the original board. The hdmi lcd board even has power, I just cannot get a display to appear on the monitor. All these videos showcase the same instructions yet my arcade 1up won't even function properly anymore. Now having to reach out to them personally for a new monitor because I am now pretty sure the monitor just doesn't work at all. If anyone has had the same issues, any input of advice would be extremely helpful as I now have to replace my entire monitor for no apparent reason

Hi what power cord do you use with this ?

My board came with a second small board that is not shown in the video. Do I need to use it and what does it do?

Whats your jumper set at 3.3 or 5v i cant get my board to work, same as yours

My street fighter 2 panel cld has one blue horizontal line. :((

Me: Goes to eBay and buys a Dell 2007FP. Win!

What kind of monitor is that

What does this do exactly?

does the monitor power on automatically as soon as it gets DC? can it be turned on and off simply via power strip?

How do I rotate the screen