Montech Air 903 Base and Max - 5 of 6 damaged!

Подписаться 235 тыс.

Просмотров 51 тыс.

50% 1

Today James checks out the new Montech Air 903 Base, and MAX models. These budget cases seem to offer a lot, but are there any catches? We find out today. Read more in the written review here: bit.ly/44rkQ02
00:00 Start
00:58 Model Overview / pricing
03:41 The White Max
04:05 Some damage in shipping
05:22 A closer look at the Max
07:55 Cooling support
09:47 Motherboard and GPU support
10:34 Cable management support
11:21 Design / storage / PSU / ARGB
13:54 Floor of case
15:05 Hardware for the AMD build
17:14 Timelapse build
21:36 Build complete
23:08 Thermal and Noise Performance
24:18 James Thoughts
25:47 We got more cases, more damaged
26:58 Close out
Check out KITGURU MERCH over here: kitgurutech.myspreadshop.co.u...
Discord invite link: / discord
Steam Community steamcommunity.com/groups/kit...
Be sure to support us on PATREON / kitgurutech and read our MANTRA on HONEST REVIEWS Here: bit.ly/2BopnF9
Final output - colour grading/titling etc:
iMac Pro 18 Core/Vega 64/128GB
iMac 2019 9900k Vega 48/64/1TB
Adobe Premiere Pro CC (PC)
Davinci Resolve Studio 14/15 (Mac)
iPad Pro 12.9 inch (2018) machines with LumaFusion
Final Cut Pro (Mac)
Visit our facebook page over here! / kitguru.net
Visit our Twitter page over here! kitgurupress?lang=en
#montech #airbase #Air903

Наука

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@KitGuruTech Год назад

UPDATE 30/06/2023 15.53. Montech has responded to our concerns and have issued the following update, copied verbatim: 'The main reason for the internal damage of the units, which was not immediately apparent from the outer packaging, was due to an oversized styrofoam cutout. This resulted in the units bouncing around inside the box during transit and causing the damages observed. We acknowledge this issue and have taken immediate steps to rectify it. I want to assure you that all mass production retail units are now equipped with a properly fitted styrofoam layer to ensure secure packaging. This improvement ensures that the units remain protected and undamaged during transportation. If any customers who have purchased the Air 903 find their units damaged due to this problem, we are fully committed to providing them with a full refund. Customer satisfaction is our top priority, and we want to make sure that every purchase meets the highest quality standards.' Credit to Montech to responding, hopefully no mass-production units make it through with damage but if you do end up with one in sub-par condition, it's good to see the company offering a full refund.

@horizon4895 Год назад

Awesome response from Montech! I really respect them for immediately recognizing the issue, issuing this response, and hopefully resolving the issue ASAP.

@JahonCross 11 месяцев назад

This is amazing customer service right there, quick response and rectifying it .

@THE-X-Force 11 месяцев назад

Wow .. well you can't ask for more than that. Great job bringing it to their attention. Montech is starting to look like a company I want to support.

@_thevaporz 6 месяцев назад

Montech rules.

@MorganT36999 Год назад

I just build a new PC with Air 903 without any RMA issues, love it! I think Montech had made improvements in the end.

@KitGuruJames Год назад

That's good to hear. 👍

@mikep9418 Год назад

I recently did a build in the Montech Air 100 ARGB in white and was very happy with the build quality, especially considering it only cost £46. Thanks for the review.

@bobsmithson8592 Год назад

what components did you use? my kid brother is thinking of getting that case.

@mikep9418 Год назад

@@bobsmithson8592 It was a build for my young daughter who mainly plays Roblox so nothing too elaborate. An Asrock B550M motherboard, a 3400g I had spare and an RTX3050. But there's plenty of upgrade potential should I need it.

@bobsmithson8592 Год назад

Love the honesty and showing all the problems. I am more likely to believe you than a few other channels who get stuff for free and just say how awesome everything is. Hoping Montech sort their quality control out !

@geofftatesmate7748 Год назад

Well done for getting them to look into this and issue a statement on the damaged cases. Likely this article saved a lot of people having to RMA their cases. Hopefully they do mean they will fix whatever it is they found was going wrong though!

@camotech1314 Год назад

Nice cases, wish the white one had the rear fan as RGB as well. It's weird that only the front fans are RGB. Nice that a 140 fits in the back though.

@Jasontyo Год назад

Montech is the most interesting up and coming brand right now, it seems. Im very interested in their mATX offerings.

@johnerikson2443 Год назад

great review and analysis James, glad I watched this review, much more detailed than other content on these cases ive seen today

@KitGuruJames Год назад

Thanks for watching, I'm glad you found it informative.

@boltsandbraces6261 Год назад

I always admire Kitguru for telling the TRUTH. ive seen another review on this case and its almost like a PR piece with no focus on build quality and other issues which James spotted on so many cases they sent him !

@CFI963 Год назад

Kitguru reviewed many Montech’s cases before, they always give high props to Montech’s products. So I believe Montech’s quality is good, this case may just a packaging issue like their response.

@camotech1314 Год назад

@@CFI963 agreed, I almost got the Montech Sky Two case a little while back.

@markhickey153 Год назад

Nice to see you back James. !!!

@KitGuruJames Год назад

Thanks! Nice to have you watching again 😁

@shredman59 10 месяцев назад

Looks great and has pretty much every feature I want in a case, fans (argb or not) and controller), all the connections on top and good airflow. This is a real winner. When I need a case, this is on the top of my list.

@erginuludag9693 Год назад

Always respect a James review.

@KitGuruJames Год назад

Thanks! 😁

@damla7621 Год назад

Thats a really slick build Its so neat!!!!

@KitGuruJames Год назад

Thanks!

@fatrob88 Год назад

Thanks for the great review!

@KitGuruJames Год назад

No problem!

@christopherjames9843 Год назад

Good job James. Great review.

@KitGuruJames Год назад

Thanks! 👍

@rangersmith4652 8 месяцев назад

A nearly indiscernible bend in the mesh may well be the price paid for saving about $30 compared to otherwise comparable cases. Montech has a winner here. I just ordered a base in white to receive a gaming build that's currently in a black Corsair 540. I'm so done messing with RGB, and the few dollars delta in the price for the Max tells you a lot about the quality of the RGB controller it includes. This will color match the rest of the PCs in the room, and white makes the build quite a bit easier.

@ffyy1372 Год назад

Love getting to the bit of the build where you put really expensive components in.

@VideogamesAsArt 10 месяцев назад

The black one without RGB looks really really good! Would love to make a void build with no lights at all. And budget too, very cool

@lucus23203 3 месяца назад

good to see a company that took care of their products

@hack_oyunlar Год назад

Love a magnetic dust filter its such a simple idea.

@camotech1314 Год назад

Yeah it's a must have for me on any pc case, I don't like having just the metal front without any dust filter. Probably why I like my Corsair 4000D Airflow so much.

@ebrarzisancelik9184 Год назад

Glad they made provision for a 3.5 inch traditional hard drive.

@iamahappybunny7640 Год назад

These are cracking for the money. some of the damage isnt so noticeable, but that failure rate is terrible. as always KitGuru your HONESTY is so important for me - never covering up problems.

@KitGuruJames Год назад

The damage isn't that noticeable, it was difficult to capture it on camera, just a shame to have something new that arrives damaged. Montech has issued an update and hopefully retail units will not suffer from these issues.

@pie_stains Год назад

I built in an Fractal Pop Air i got for $63 shipped recently. No argb and un fortunatly the windowless version went on sale for the same price a few days after building.

@georgelowrielowrie5428 Год назад

Look clean! Good value also! Win.

@QuentinStephens Год назад

It's always a pleasure to see a James build. Great work and top commentary. Really well done to both you and Montech for spotting and acting on the QC problem. Now, what are you going to do with six of these cases? At 12:01, are those front panel ports and buttons socketed? It's a pity the cabling on the white version isn't white. I think I asked it on your Computex piece but how sharp are the edges of the holes without grommets? Indeed, are those holes a size for which grommets are readily available? I suppose it's attention to details like that that turn a budget case into a premium one.

@KitGuruJames Год назад

White cabling on a white case always looks better, it's often a detail missed by vendors. The edges of the cable cut-out holes without grommets are not sharp at all, the steel is folded around the edge to create a smooth dull edge.

@buyingastairwaytoheaven5252 Год назад

great build - as always James ! such clean builds, comes naturally to you. I know these cases are cheap and 6 out of 6 cases had some damage - but could it be the mesh is just too thin to save costs and its bending even when being packaged?

@lucifersheadscarf6988 Год назад

I think it was 'only' 5 out of 6 of the cases. but still, thats not good.

@FreelancerND 6 месяцев назад

Bought mine Air 903 Max just yesterday here in Russia. Packaging was spot on, no wobbling and bouncing, so I guess, several month later - Montech was true to their response and took steps to negate this issue. Also, I LOVE the case, had Air X before that and it become a bit small for my Radeon 6950XT paired with 5800x3d, not that much room for AiO 3 fan cooler. But 903 Max, swet sweet case, I just love it. Montech nowadays ships the best value hardware for your buck. Also, their case fans should not be ignored too, very good for their price and you can even get reverse blade ones.

@overclockingdemon7179 Год назад

I love watch the master at work building a PC !

@KitGuruJames Год назад

Shame you got me instead right? 🙃

@overclockingdemon7179 Год назад

@@KitGuruJames too modest !

@monkeh86 Год назад

Nice review. Seems a decent enough case for the price. Reminds me a bit of the Phanteks G500A but with not as good build quality.

@tallsz559 11 месяцев назад

Also half the price… lmao

@isidrocastanon 2 месяца назад

Hello, I have this 903 max. I want to change the front fans for 3 ARCTIC P14 PWM PST A-RGB. These Artic fans are connected in a chain. My idea is to connect the last PWM connector in the chain to the FAN 1 port of my motherboard and the 3 ARGB of each fan also go in a chain. Could I connect the last ARGB connector in the chain to a single connector on the hub or do I necessarily have to connect each front fan to a 3-pin connector on the controller hub?

@lucifersheadscarf6988 Год назад

I love the white one, very nice cases to look at. shame about the bent panels. if there is no damage on the boxes (are you sure?) - thats a rather massive concern. thinner metal in transport from China - maybe they need to ramp the box protection up more if they are warping so easily. love the builds james as always - top notch

@KitGuruJames Год назад

There was no damage at all to the external packaging. Montech has issued an update today and it seems that the internal Styrofoam is to blame. Mass retail units should not suffer from the same issue.

@taomahNEGEV 3 месяца назад

Looks sleek. I am wondering how it compares to the Endorfy Arx 500 Air?

@popsmokekingthewoo Год назад

Montech Air - getting dangerously close to an Apple trademark there Montech!

@alexisjavier84 10 месяцев назад

one of the fans on mine hums, I wonder if it got slightly damaged in shipping or if it's just how it is.

@tuanphung7369 3 месяца назад

I was unable to fit 3 140mm fans on top. Was only able to fit 2.

@canarychrome7012 Год назад

its pretty much indicative of what montech make - budget friendly cases that seem to compromise on quality but look ok and make for a decent first system build. I can't help but always consider them a bit of a budget cutting corners brand.

@sfx89 Год назад

I hope there will be a matx version.

@hairsprungdutchtechnique9626 Год назад

really good prices for those cases for what you get, bit concerning to see so many damaged however. how did that happen? what are they changing to fix it?

@KitGuruTech Год назад

Montech confirmed to us that they identified an issue with the product packaging and it has since been ‘rectified', but we've not heard any specifics as to what's actually changed.

@inlovewithmycar7085 Год назад

wow 6 out of 6 damaged. thats not a good fail rate. Are these pre production cases? I saw another review of them up by some irish guy, but it wasn't very good. thanks for being completely transparent james and showing all the problems - looks like a brilliant case for the money if it arrives without damage

@VinnyAGil 6 месяцев назад

how's the thermals between base/max?

@robotikcocuk5765 Год назад

Not a bad idea having a non RGB at the rear of the case given you’re not likely to be looking at that that often.

@Ttblondey 3 месяца назад

Only thing is the side panel are thin.. since the price is cheap so no complain😊

@doingbartthings Год назад

Wow very competitive case for the money it looks like. Montech seemed to be really upping their game at Computex. What I think the REAL story is here, they worked with Kitguru to see if this was a one off issue. Then took immediate steps to resolve it and insure as few of their costumers would be impacted as possible. They didn't try to slink away from this issue, they investigated, got to the bottom, then fixed it. That's the kind of company I want to do business with in the future should I find myself in the market for a case.

@KitGuruJames Год назад

If the issue is resolved then fair play to Montech for acting quickly. I am tempted to buy a couple when they come on sale in the UK to see how the packaging has changed compared with our six review samples and if it has fixed the problem.

@doingbartthings Год назад

@@KitGuruJames That would be great, to put a wrap on that QA issue if you could do it. Great video, great work!

@yup458 8 месяцев назад

biggest thing for me is is the fans are pretty loud, they dont go below 600 rpm in pwm mode.

@markmontes007 10 месяцев назад

That's so elegant..

@LG-ml7jn 11 месяцев назад

Anyone know where you can buy this in the UK?

@vakke 9 месяцев назад

Thank you for an excellent review! How would you compare this to the Endorfy Arx 700, which one do you prefer?

@KitGuruJames 9 месяцев назад

Very similar cases, difficult to choose between the two. I'd say whichever you can pick up for the best price would be the one to go for.

@vakke 9 месяцев назад

@@KitGuruJames Thank you for your response James!

@nedemerdegani4575 Год назад

The white one looks the part understand why it is a slight premium.

@yigitmertkeskinklc1299 Год назад

Would have been better to see it built into the white chassis!

@BlackVScarab 10 месяцев назад

The standoffs are built in right?

@amdforlife5591 Год назад

I like Montech, good wee cases for little money. Bit concerned with seeing so many bend panels and mesh covers in this one. so many cases they sent you and finally admitted they noticed a problem! How exactly are they fixing it ?

@KitGuruJames Год назад

A change to the internal packaging is the suggested fix.

@historianfabulousio5128 Год назад

Are you doing any more mods this year James? miss them from 2022.

@KitGuruJames Год назад

Nothing in the pipeline yet but you never know whats coming around the corner. Watch this space!

@shaynemorgan6991 Год назад

This looks like a such good case. The fans are all PWM right ? If not for the shipping damage this is the best budget case of the year man !

@KitGuruJames Год назад

It is a good budget case for sure. The fans are all PWM. But the damage was not due to shipping. The inner and outer packaging on all samples had zero damage. How the side panels fit is also a poor design. If the bent mesh issue is fixed, it's certainly great value.

@CFI963 Год назад

I have to agree for today’s market, this is an insane price for what we are getting.

@historianfabulousio5128 Год назад

@@CFI963 well its only insane pricing if they arrive undamaged. 6 out of 6 damaged cases isnt a good indication of quality control, especially if the boxes arent damaged.

@overclockingdemon7179 Год назад

I agree its a great case for the price. one of the best I think I can find at this price point. What are they fixing though to stop the damage during shipping issues (or where all 6 damaged before shipping? ??!!)

@pandaoyunda9514 Год назад

Its annoying manufacturers have given up on front drive bays.

@noslen27185 Год назад

😊

@larwiemcdonnel5322 Год назад

Are we sure their quality control and packaging is fixed? you got 6 cases and they all had problems? seems like quite a bad fail rate. would be hard to jump into buying one of these without ensuring you had good dealer support.

@THE-X-Force 11 месяцев назад

Just sucks how the CPU cooler covers the RAM. Obviously that's not Montech's fault. I just hate the way it looks. I guess the only way to avoid it these days is to go with liquid-cooling. Anyway .. thanks for the thorough review!

@luizfernandodesouza7146 3 месяца назад

Qual é a parte que ele fala do peoblema??

@stevewatson6839 Год назад

Good case provided, as it looks like they have, Montech rectify the dint issues. Examplary review from yer man as per. It takes 3x140mm fans at the front, could a 420mm rad be fettled? That GPU screw alignment problem comes up regularly for me; imho EVERY case maker should put more wiggle room in for the screws that attach the GPU I/O bracket.

@KitGuruJames Год назад

A 420 rad might be a struggle even with some serious fettling.

@stevewatson6839 Год назад

@@KitGuruJames Thanks, James.

@_thevaporz 6 месяцев назад

Snagged the black base model on sale off newegg $54 shipped.

@vrekman256 Год назад

@donaldgray2501 Год назад

When will it be available in the UK?

@KitGuruJames Год назад

Montech told us that it will be available in the UK soon after launch, but no official date.

@iSwearToCod 4 месяца назад

got mine in UK the other day

@edwardhuang2475 5 месяцев назад

The fans are too noisy. What Can I do? Do they have a case fan controller to buy?

@KitGuruTech 5 месяцев назад

If you bought the Max version it comes with a fan controller. I would connect the fans/fan controller to a motherboard header and set the fans at a static RPM in BIOS which you are happy with noise levels. I usually go for around 900-1000RPM.

@s1laweyxww Год назад

James looks like hes been out on the town the night before this video.

@KitGuruJames Год назад

That's just my usual everyday look. The Mrs says I should put more effort in, maybe she is right but I don't have the time for that in a morning 😂

@samiakcan3008 Год назад

You can see eventually a PC case is just going to be a bunch of mesh netting with fans inside.

@iSwearToCod 4 месяца назад

mines fine

@biggsam117 Год назад

How can this case that cost half of a 5000D airflow can fit 3 140mm fans up front but cannot do that with a 5000D airflow? Corsair...you're failing us!

@tallsz559 11 месяцев назад

Yeah, 4000D/5000D are ridiculously overpriced and overrated for the price

@Elifiniz_Civciv Год назад

Such a shame they got a knock in shipping but given how packages are literally thrown around by the drivers cant really be surprised.

@KitGuruJames Год назад

The damage was definitely not due to mishandling during shipping,.All the cases arrived with 100% perfect outer packaging, with no sign of being mistreated during shipping.

@malcolmclenton1663 Год назад

You get what you pay for. I purchased a Montech Sky Two and the power button failed after 2 months! Trying to get just the switch panel under warranty was not an option.

@ikilikaracalar6353 Год назад

Really cant complain about that pricing.

@KitGuruJames Год назад

Not at all, with fans and an ARGB hub the MAX seems like superb value.

@SJHD Год назад

One thing i love about montech is they always seem to have the perfect cutout placement for the gpu cables. So many other cases force you to loop it over the gpu to the back, looks so ugly, montech does it right