Monterey on Unsupported Mac [2008-2015] OpenCore Legacy Patcher!!!

Подписаться 88 тыс.

Просмотров 552 тыс.

50% 1

CLICK ON MY UPDATED 2022 OLCP MONTEREY VIDEO! You can Install macOS Monterey on Unsupported Mac from 2008-2015! READ UPDATES BELOW! I'll show you how to use OpenCore Legacy Patcher to install macOS Monterey on your old Mac! I will walk you through the entire process! CHAPTERS & UPDATES BELOW.
OCLP UPDATES 06/22/22:
Check out my 2022 UPDATED OCLP Monterey how to video - • macOS Monterey on Unsu...
#1 - You can use the 0.4.6 TUI app to follow along with this video or use the GUI app. github.com/dortania/OpenCore-...
#2 - If you have a 2012, 2013 or 2014 Mac with an Intel HD4000 or Kepler based Nvidia GT600 - GT700 graphics, You will need to install the post volume patches!!! Big Sur was fine but Apple removed them from the Monterey Installer.
#3 - If you have a MacBookPro11,3 15" Late 2013 or 2014 and you are stuck at the progress bar after install = boot it with safe mode (hold down shift on boot) then apply the post volume patches. Reboot and you can then install OCLP to your internal hard drive. - github.com/dortania/OpenCore-...
Chapters
0:00 Monterey OpenCore Legacy Patcher Intro
0:30 Updates (Check Update section in the description first)
1:04 Requirements for OCLP and Monterey
2:39 How to download Monterey Full Installer
3:44 How to Erase & Properly Format USB Drive
4:50 Create Monterey USB Installer
8:00 Downloading & Setting Up OCLP App and installing to USB
11:42 Rebooting the Mac to the USB Drive by holding down Option
12:10 In Monterey Recovery Option #1 Upgrade
12:35 In Monterey Recovery Option #2 Erase & Install
14:25 Install Finished - Go through setup assistant.
15:00 Installing OCLP to internal hard drive
18:11 Post Volume GPU Patches - Problem with 2011 MBPro
19:22 Install Post Volume Patches (2008-2013 - HD4000 & Kepler)
20:12 Complete! Software update explained
20:42 Inverted or colors flashing use ResXtreme
21:34 How to enable keyboard backlight
22:30 Conclusion
23:00 Thank you + Patreon
I want to thank both Mykola Grymalyuk (khronokernel) & Dhinak G (dhinakg) for your work on OpenCore Legacy Patcher + all of the contributing developers that help maintain the patcher! OCLP will bring new life to thousands of Macs saving them from the recycler!
Support Mr. Macintosh
/ mrmacintosh
paypal.me/mrmacintoshblog
OpenCore Legacy Patcher 0.4.6 TUI app
github.com/dortania/OpenCore-...
Direct Download Link macOS Monterey Full installer InstallAssistant.pkg . - mrmacintosh.com/macos-12-mont...
SUPPORTED MAC MODELS LIST
dortania.github.io/OpenCore-L...
Having a issue? - OpenCore Legacy Support + Discord Server
/ discord
OpenCore Legacy Issues - github.com/dortania/OpenCore-...
MacRumors Thread
forums.macrumors.com/threads/...
Install UEFI Windows 10 Install Video
• Install Windows 10 UEF...
macos monterey old mac
DISCLAIMER: Please understand that installing macOS Big Sur on your unsupported Mac is a best effort by the community. A ton of work went into getting the patcher to work! Some things might not work exactly right but it's really really close. I would not recommend installing on a system that you rely on for work or school. ALWAYS BACKUP YOUR FILES FIRST BEFORE YOU UPGRADE! The good news is that you are getting the latest security fixes from Apple. Some might argue that upgrading to Patched Monterey makes your Mac safer since Apple is no longer fixing security issues on 10.13 and below.
Support Mr. Macintosh!
/ mrmacintosh
paypal.me/mrmacintoshblog
Subscribe to "The Apple Ninja"

Наука

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,3 тыс.

@Mr.Macintosh 2 года назад

Let's keep those old Macs running! I will show you how to breath new life into your old Mac with macOS Monterey and OpenCore Legacy Patcher! Let me know if you have any questions. Huge shout out to all the OCLP Developers, you have done a fantastic job with the patcher! 👍

@dailyvideoconsumption 2 года назад

thank you Mr Mac!

@pbtran 2 года назад

Thank you Mr. Macintosh and OCLP developers,. I was able to get Monterey 12.01. running on 2011 MacBook with 4 gb RAM and traditional spinning drive. It runs faster than Catalina and doesn't require at least 8 gb to run efficiently like with Big Sur. Monterey 12.1 installation is next on 2009 27" iMac.

@SavannahTL 2 года назад

Can we upgrade to 12.1 via the normal software update?

@batman47751 2 года назад

I did install it but now my wife why can't be connected to die Mac is there anyway I can fix this

@batman47751 2 года назад

Can I ask if you just updated your iMac how many times do you have to use open car patcher is it 1 time to update iMac and another time make it load up like normal because when I turn on my iMac I get a bunch of code first the load up screen then it goes onto the desktop after I put my passcode in

@terribrown6550 2 года назад

What a legend!! This was perfectly explained, and a great lesson, everything covered to update a 2011 15 inch with Monterey! Thanks sooooo much

@TheOn3LeftBehind 2 года назад

This is amazing. You made this so incredibly easy. I had zero questions throughout the whole process. Thank you!

@mdiaz0429 2 года назад

The installation of macOS Monterey on my unsupported 2013 MacBook Pro went flawlessly thanks to your detailed instructions. THANK YOU!!!

@vineetvaishnav 2 года назад

Thank you so much for such a clear and concise guide! This in combination of the Windows 10 dual boot video has helped me a great deal! I wish a lot more people are able to view your content.

@AndyHutchinsons 2 года назад

Great video - thank-you. I was disappointed when my Macbook Pro 11,1 missed out on the Monterey upgrade so I was pleased to see your guide. Your instructions were clear and easy to follow and my trusty Macbook is now running Monterey without any issues at all. Cheers.

@SnowNight 2 года назад

@aliyanshah1713 2 года назад

is there any problems that you faced after updating? or the did the Mac itself overheating? thanks

@TristanBurgener 2 года назад

You are a saint! And for all the 2013-2014 Retina MBP owners out there, there is an option now inside of Open-Core to disable Thunderbolt kexts. After going through so many random shutdowns during boot, this seems to have done the trick. TY @Mr. Macintosh!!

@foreverslighted 2 года назад

holy shit finally, thanks man. randomly found this comment otherwise it'd never work lol

@samrubra 2 года назад

Awesome instructions, thanks so much for taking the time to document it so well. I'm a PC user and a Mac novice and I got it working first time!

@digitalmediafan 2 года назад

Flawless fresh install on a 2012 mac mini thanks to your excellent guide 😀

@rohitbrowsing 2 года назад

Excellent, very quick updates and full guide is very much appreciated…

@sffortytwo 2 года назад

Just tried this now with a 2012 MacBook Pro (9,1) and it worked perfectly. Thank you for the clear instructions.

@Mr.Macintosh 2 года назад

You're welcome! I'm glad your 2012 MBPro will continue to live on!

@GRWHWindowTreatments 2 года назад

Worked flawlessly on Mid 2014 MacBook Pro 11,2 going to Monterey. Thanks for the guidance! Keep up the great work you do for us all. Happy Holidays

@Tmarkr 2 года назад

Monterey 12.3 working perfectly on Mac Pro 5,1... I had to bounce around between a couple videos to get all the steps, but they worked well together.... thanks a lot to you and the OCLP gang

@W7WIL 2 года назад

Just in case anyone else runs into the same problems I did, my Mid-2014 MBP would hold at the Apple logo with a progress bar that would not move. I booted into safe mode by pressing Shift while loading from the OCLP picker menu and once I was in there, I installed the Post-update patches. After that, I was able to boot up and then install the patcher on the EFI of my MBP’s internal SSD. I know that it has been said that the post update patches aren’t required but in my case they seemed to be the only thing that allowed me to get into the system. I’m not certain but I think it was caused by the dual GPU of the system. Everything seems to be working flawlessly now. Thank you MrMacintosh for your tutorial.

@DonaldCollins 2 года назад

I had that same issue and just gave up and went back to Big Sur

@W7WIL 2 года назад

@@DonaldCollins I gave up originally but decided to try it with the post update patching in safe boot and it solved it. Well worth it if you decide to give it another try.

@DonaldCollins 2 года назад

I’ll take your word on it bro.. today will be my third day trying to upgrade it lol

@DonaldCollins 2 года назад

Just to be clear after it freezes on the apple logo, reboot and boot from the efi and press the shift key?

@jplattet 2 года назад

I could not get the install on my Mid-2014 MBP 11,3 to fruition before I read your comment. I wish I could have given you a jillion thumbs up! 💯

@stanleyjones6927 2 года назад

I did this today on my 2021 Mac Mini 6,2. It went flawlessly, including the post install patch for the video. Total install time was less than two hours, installing from a USB 2 flash drive to an internal SSD. I did the update, not a clean install. Your video was well made, with clear screenshots and great explanations. Thank you so very much

@bigsur370 2 года назад

Why do you need the patcher for? Your mac is supported? Bruhh

@CarlosFigueroa 2 года назад

dont you have issues doing it with not clean installation?

@gene_Code 2 года назад

@@bigsur370 typo. u see he typed Mac Mini 6,2. 6,2 was 2012 year

@mikefamm5712 2 года назад

Speaking about 2008-2013 HD4000 and Kepler starts at 19:22, as that is when you start installing the post volume patches. Not 19:48, as the chapter dictates. Awesome video though!!! Very clear, straightforward, and easy to understand- you explain things we might not know very quickly but still effectively.

@DaveHerrington 2 года назад

Thank you so much Mr. Macintosh! Your demo was spot-on and enabled me to install Monterey 12.3 on my Mac mini 2012 with no problems.

@emotionalintelligence776 2 года назад

First and foremost, Thanks. The vast community involved with everything that makes feats like this possible are truly unsung heroes. Not everyone has the funds to drop $2-10k on a Mac, EVERY YEAR, some, probably more than a few people, need to keep using what we've already spent monies on for various reasons. Everyone loves buying something new and shiny. But what never gets old for me is the satisfaction using something I enjoyed maxing out over a period of time, like my 5,1 MP now running Big Sur. I still have various iPods and iPod classics upgraded to flash storage that cost as much when they were new, but no one said hobbies were cheap, but definitely at least for me, the most rewarding. Thank you again.

@Maximara 2 года назад

Why would anyone drop $2-10k on a Mac, EVERY YEAR?! Unless you NEED to be on the cutting edge Mac has an insane live span. My 2013 iMac supports Catalina (came out 2019) which got an update to its OS in 2022. That is THREE YEARS of new OS and NINE YEARS of OS support.

@emotionalintelligence776 2 года назад

@@Maximara Not sure why people post silly questions that APPLE answers every year with their new product releases. And for those who fail to comprehend the obvious, the fact remains that Apple through controlled obsolescence forces you to upgrade. That has nothing to do with I have a decade-old Mac Pro that still runs blah blah, it has to do with money. Apple does not generate its billions with its consumers using old devices that profit is from new purchases. Do you need a new iPhone EVERY year, no, yet Apple makes a new iPhone do they not? But that's not the driving force, the new OS is what forces you to pony up to a newer device and if it was not for modders, many Apple fan lovers would be using a Microsoft PC!

@Maximara 2 года назад

@@emotionalintelligence776 As I said before a Mac will support OSes to at least THREE YEARS after its production date so the claim "new OS is what forces you to pony up to a newer device" is nonsense as parts of the much cheaper PC world are still using Windows XP. Never mind the Mac is not the top dog in revenue. Heck, in 2019, $260.2 billion was in iPhone sales services being $68.4 billion in 2021 (one of the reasons Apple is fighting the EU and US efforts to open up iOS) with Mac seeing $35.1 billion in 2020 (largely due to the M1s.

@PI-Media 2 года назад

I upgraded my MBP 2011 late 15" to Big Sur from dosdude1 patched Catalina but its top menu was missing, then upgraded from Big Sur to Monterey and working almost perfectly, just needed to install Lab Tick for keyboard backlit. Keep up the good work.

@Mr.Macintosh 2 года назад

This is great news Ali!!! Glad you are keeping that 2011 MBPro still running

@johnny14794 2 года назад

Thank you for keeping our old Mac alive and useful! Much appreciated what you do for us and sharing these solutions! Stay safe and Happy Holidays!!!

@h.v.enterprises3097 2 года назад

I am on an iMac 2011 mid. I am stuck on the less than a minute remaining after installing Monterey over Big Sur. What do I do?

@stephenjones5665 2 года назад

Thanks a lot, @Mr. Macintosh - your guide helped me to install Monterey on my late 2013 iMac. The guide was flawless, and the OS is almost the same on this 'aged' machine. Was going to give up after Catalina stopped being officially supported and switch to Elementary (I'm not tied to Apple, and have used Linux in the past), but this has kept me in the world of Mac for the time being. Thanks again for all the steps being so well laid out and explained, and also to all those who help compile these patches and related bits and pieces.

@caballo_viejo_97 2 года назад

I can't believe it, I was just watching a video about how to do it from another guy. But I was waiting 4 you hehehe

@AllahWinch 2 года назад

Great instruction. Clear and simple. Thank you for your dedication. Everything work well - I use OCLP 0.4.5 to Install Monterey 12.4 on a Mac Pro 4,1 with CPU and GPU upgrade. (now : 5,1 2009 & Nvidia GeForce GTX 680 2 Gb ) - Monterey is running smootly on a 13 years old Mac Pro ! ! Thank you so much again for your time

@umerqureshi7663 Год назад

Is it working fine?

@danielhenderson-yendrys9152 2 года назад

Can’t explain how happy I am with this, was scared I would get lost but i did not and your time stamps are awesome. Was beyond inpressed I liked and subscribed Ill share you with my friends!!

@luiseliasrodriguez4327 2 года назад

Mr. Macintosh, I have two weeks since I installed Mac OS Monterrey in my late 2012 iMac and just want to express you my gratitude for such and well put installation, clear and responsive, my computer is doing so well that it seems like new. Thank you.

@Mr.Macintosh 2 года назад

Thank you Luis!!! Think about it, running the latest version of macOS on a 10 year old Mac. Pretty cool huh?

@giuseppem6833 2 года назад

hi luis, im thinking to update my late 2012 imac. do you find the new system good on the mac? do you suggest me to update mine?

@luiseliasrodriguez4327 2 года назад

@@giuseppem6833 Giuseppe, I think it is a very responsive update only folow up the instructions from Mr. Macintosh.Enjoy. Monterey on Unsupported Mac [2008-2015] OpenCore Legacy Patcher!!!

@nathancharnas 2 года назад

Ahh I forgot to disable that thing in the debug settings before installing OCLP to my drive so I was just greeted with a bunch of white text that went on forever. Quickly changed that and reinstalled the OCLP now it works as intended. Thank you dude.

@Mr.Macintosh 2 года назад

Glad you got it working!!!

@ariesomed769 2 года назад

Disable what?

@paulrosowicz5117 2 года назад

to those users who are experiencing system lag and a jerky mouse even though your computer is Metal-capable, still apply the post-install volume patch in OCLP. it will fix those two issues. i have a mac mini 2012 ssd and 16gig ram and the system works great now. thanks Mr M for posting your videos!!!

@Mr.Macintosh 2 года назад

Great catch Paul. I forgot to mention that Apple removed the Intel HD4000 & GT600 - GT700 from the Monterey Installer. SO you will still need to apply the patch. I added this to the UPDATES Section thanks again.

@pawelrowinski63 2 года назад

I owe you a beer. the second display is alive again :)

@supersaiyanyaaj4219 2 года назад

@@Mr.Macintosh macPro 5,1 I am having issue with GPU lagging I try to re-patch for metal -capable. I have Radeon RX580 I try to re-patch getting the message "The following patch will be applied: -No Root Patches is required for your machine! SIP is disable also. Please help and point me in the right direction.

@castenie 2 года назад

Back again - Mr Macintosh, you rock. Up and running with Big Sur! Thank you very much! Going to support you with $$

@Mr.Macintosh 2 года назад

Hello Einetsac, thank you very much. I'm glad everything worked and you are up and running with Big Sur! 👍

@karlepps8793 2 года назад

Thanks Mr Mac, my 27" iMac 14,2 is now fully working with Monterey 12.0.1 and OCLP 0.31. Hadn't realised that I needed to complete the final step with the Post Volume Patch to cure some graphic board issues (e.g. Sleep, brightness control and video playback). Keep up the good work. :-)

@ptrickf 2 года назад

Same system here so it was good to see this. Thanks Mr Mac and Karl

@MTBchill 2 года назад

Man, this is a game changer. Thank you so much for providing this content. I was able to keep my upgraded 2011 mbp running the latest os, this is insane!

@mohammedmohammadi8238 2 года назад

Thanks for this video. I upgraded my MCBP 2010 to latest OS. It took some tries but it worked at finish. Some graphic issues is still there which are due to my MCBP age. I have Samsung EVO SSD and 16G ram. Thanks again and keep this good work!

@formotu 2 года назад

Hi Mr. Macintosh. Like most everyone here I just want to thank you for making this video. You saved me and my Macbook Pro 2012! I am now running it with macOS Monterey and OpenCore Legacy Patcher and so far it's been working great! No lagging or slowing down, and that's been a problem with this Macbook Pro for a while now. So thank you!!

@RickyAlifNurAzza 2 года назад

still confuse about installing volume gpu patch :(

@kennethkuscher4385 2 года назад

I wanted to thank you for this video and Clear instructions. I did this on my iMac Late 2013 and am very happy. I thought I didn't need to so the patch. My second monitor on the system would not work but I then installed the patch and it worked great. Thank You.

@followthetrawler 2 года назад

MBP 5,1 upgraded from El Capitan to Monterey with the aid of the post install patches. Thanks so much for this, so much software wont run on El Capitan now and even though this MBP is 13 years old it still performs well enough for what I use it for.

@GuillermoPaulman 2 года назад

Wow, there are people who still use 5,1? I thought I was the only one :D Well done! It's still a good machine.

@florider_hd 2 года назад

did you erase your harddrive or did you upgrade it?

@khan0-v9d 2 года назад

Is it working fine??!!!

@followthetrawler 2 года назад

@@khan0-v9d a little screen tearing because the video driver is beta - I havent checked to see if its been updated, but its liveable for what I use the Mac fofr.

@vijayradhamanavalan4868 2 года назад

Mr. Macintosh... Thank you so much... I was able to install Monterey on my 2014 MBA. Your step to step tutorial was so helpful.

@garrywatters4456 2 года назад

Just bought an old mac mini 2011 to act as a music and video server. Watched this video and thought "I wonder if I can get Monterey working on it." Followed the instructions and 2 hours later I now have Monterey I stalled and running very smoothly. Awesome video and awesome advice. Thank you very much and keep up the good work.

@SiyabongaMarhaule 2 года назад

Hello from South Africa 🇿🇦, I’d like to say thank you very much for this. I have a MacBook Pro 2011 which I have been struggling with, to upgrade to the latest MacOS update but now my old MacBook Pro looks and feels new. Thank you very much @MrMacintosh. The way you articulate yourself in explaining and guiding us through is very much clear and easy to understand. I wish my lectures at university were just like you. Thanks a lot once again. 🙏🏾👍🏾👏🏾

@aTouchoClass 6 месяцев назад

Hi there, I‘m about to upgrade a similar machine (Macbook Pro early 2011 2.3Ghz Dual-Core i5; 8 GB RAM, 500GB SSD) . Do you happen to run Logic Pro X on your MBP? If so, how does it work, any issues? Cheers mate.

@dennisheffner3818 2 года назад

You are the best Man! Works perfectly on A polycarbonate Macbook mid 2010. As a bonus, It works Even better than MacOS High Sierra!

@hamzak7261 2 года назад

Hi Dennis, I also have a white MacBook 2010! Are you using with a hard drive or SSD?

@Bartem_ 2 года назад

Hey Dennis, does WiFi and Bluetooth work for you?

@joshuasibayan1726 2 года назад

Thank you! Very easy tutorial to follow. Upgraded my 2012 Air from the Big Sur Patcher, and graphics acceleration is a must. My mom got the new M1 air and i immediately wanted a clean install of Monterey.

@jasonrodda98 2 года назад

just installed this on my late 2013 iMac and had no issues doing so and following the steps here. well done man

@parasmoradiya3813 2 года назад

Installed SUCCESSFULLY in my MBP 2012! Thanks for the detailed instructions. This works absolutely fine without any issues.

@choonky 2 года назад

install the post install patches, it runs really badly until they are installed

@parasmoradiya3813 2 года назад

@@choonky yeah, thanks for the information, installed the patches and working absolutely fine!

@choonky 2 года назад

@@parasmoradiya3813 Glad i could help! 😃

@Mr.Macintosh 2 года назад

Great to hear Paras! I'm glad your 2012 MBPro is back up and running 👍

@parasmoradiya3813 2 года назад

@@Mr.Macintosh Got caught up with one more issue. For some reason, my MBP 2012 Bluetooth won't turn on. I tried restarting the system but no luck! Any suggestions would be greatly appreciated.

@cgrubba 2 года назад

Excellent explanation in this video, thank you. I did this OS upgrade on a MBP4.1 (early2008)!!!, and only got success after installing it over Catalina. I tried a clean installation, it gave volume mount error in the patchs post installation process. Another problem found, was the low brightness of the screen, which was only fixed after resetting the NVRAM after installing the patches

@sphico 2 года назад

brother, how did you do it? I have an MBP at the end of 2008 and it won't let me use it after updating, my computer freezes. I don't know what else to do to make it work.

@PatricioBenavente 2 года назад

Planning to do it this week to my MBP 5,5 2009. Any tips?

@tanmaybarot4708 2 года назад

Thank you due to your help i installed Monterey on both of my old MacBooks. Pls keep up ur good talent and upload videos for us

@armandoponce-garcia8494 2 года назад

Beautiful!!!!. I used the latest oclp and it worked great. Thank you, and all the developers for this wonderful product. THANK YOU!!!!!!!

@james_m_ 2 года назад

Massive thank you to you and everyone involved. Clear and concise, as always

@Mr.Macintosh 2 года назад

Thank you very much James!

@keivenrussey2355 2 года назад

@@Mr.Macintosh After completing everything and macOS Monterey is installed my Wi-Fi networks will not show up. How do i fix this problem?

@christya2488 2 года назад

Hi. Thanks for all the great info! I just finished following your tutorial, and I was able to update a late 2011 13" MacBook pro from High Sierra to Monterey using Open Core Legacy 0.4.2, and Monterey 12.2.1. The only major issues I'm having, besides a bit of lag, is that the fans are running WAY more, and the MacBook feels warm. The illuminated Apple logo on the back of the display never shuts off, and the battery is also draining quickly. Any advice?

@map0824 2 года назад

My 2012 Mac mini is working now. I had to follow the instructions. Very happy, thanks.

@DigitalMentorGroup Год назад

I have both a 2008 Mac Mini, and a 2012 Cheesegrater Mac. This process works well on both desktops! Thank you for these updates!

@bjorngrauers 2 года назад

Hey @Mr. Macintosh and thanks for a great tutorial and help! just two questions, first relates to this segment in the video where you choose to install on the internal drive, which drive should I pick if I have a fusion drive i.e. should I pick the SSD or HDD part of the fusion drive? also does it matter that I have a BootCamp windows partition. Id like to keep it if possible(16:43) Second I wonder if there is a way to use airplay in 2440x 1440 resolution on an 2013 imac. i only get the option of 1920x1080 as max resolution when connecting a 2021 MacBook 14 inch. Thanks for all the help I can get

@samsittikul 2 года назад

Thank you so much, my MBP mid 2010 is working like charm.

@vasyltokar4062 2 года назад

Any issues? With sleep mode or something?

@TheLostboysix 2 года назад

Thank you very much. Always used Windows and just bought a Mac Mini 2012 out of curiosity. Although I don't have any experience with Mac OS thanks to your Video the Installation worked flawlessly. Great Job! And of course also big kudos to the Devs of the patcher tools!

@planetvng3426 2 года назад

Great tutorial! Followed it step by step and successfully upgraded my MacBook Pro 15 inch Mid 2012. Thanks!

@DDDINC420 2 года назад

I HIGHLY recommend making a partition at the end of the install USB and have OCLP on it to avoid having to download again. Before the acceleration patches are installed the machine is SLOW, so this avoids having to deal with that

@edwardpickett1760 2 года назад

I was just going to say stick the OCLP on a separate USB stick 😎

@methanoid 2 года назад

@@edwardpickett1760 does it NOT work from the SAME stick? Works for me I think. No sep partition needed

@edwardpickett1760 2 года назад

@@methanoid It really doesn’t matter does it. It was just a suggestion so don’t call someone up for minor details.

@methanoid 2 года назад

@@edwardpickett1760 get off your high horse. I didnt "call someone up", it was a SUGGESTION and a plus as it avoids 2nd partition and 2nd stick. Get a life if constructive suggestions bother yoU!

@edwardpickett1760 2 года назад

@@methanoid there was no need for you to comment as DDINC had already suggested and my comment after his entry was more a passing comment followed by an emoji with sunglasses. I am sure they took it as it was meant unlike yourself.

@Blahshog 2 года назад

Tried this today and it went without a hitch on my late 2013 Imac 27". Thank you.

@Kammreiter 2 года назад

🤔 did you download the oclp directly from his website to the USB drive in your older 27“ iMac? Or did you need a newer machine for THIS? I had problems to download the pkg to the older iMac (it was only impossible and couldn’t be installed either)

@Blahshog 2 года назад

@@Kammreiter I downloaded direct to my iMac and followed the tutorial, it worked fine for me, I had to try the download a few times as the server was incredibly busy and took a long time to connect and download.

@chiranjeevgorur7867 2 года назад

Does Every feature work??

@mikelmarion 2 года назад

@@chiranjeevgorur7867 this. What works and what doesn’t. Does the Wifi work?

@eel64 2 года назад

Absolutely Brilliant !!! New to Mac. This by far the best tutorial I've seen, that's MacOs related. Again Thanks.

@SoloRider831 2 года назад

Thanks for sharing this knowledge. I just updated a 2012 MacBook Pro Retina (with the HD4000 graphics card you mentioned) using your video as a guid and it went FLAWLESSLY. Thanks so much for helping restore my old Mac was stuck in a box back in 2017 and forgotten about. I will now get a lot more use out of it (especially after having just replaced the left speaker for the issue on that).

@GP15Baller Год назад

Dude i really beed your help I have the same model but have issues on Big Sur with the wifi

@AnthonyChopra 2 года назад

i will be upgrading on Tuesday for my MacPro5,1 since i tested the install on a second SSD and it worked really well again. felt as if it was a mac that apple should of still supported. opencore is way smoother now days

@gbaren 2 года назад

I'll be interested to see how this goes for you as I have a 2010 5.1 Mac pro w a OWC SSD boot & flashed RX580. It's still my main machine so I need it solid.

@brianheenancomedy 2 года назад

Will be following this aswel as i have the same device with a metal supported gpu.

@gbaren 2 года назад

@@brianheenancomedy Sympatico :) What a great machine, right?

@VenturaWeddings 2 года назад

Its been 3 months now. Wish we would hear back from Anothony.

@VenturaWeddings 2 года назад

@@gbaren 2010 5.1 Mac pro w a OWC SSD boot & flashed RX580--- same machine here. Did you get Monterey running?

@chikombechela2460 2 года назад

Mr. Macintosh!!! Totally a legend! The video walkthroughs are absolutely the best!

@Mr.Macintosh 2 года назад

Thank you very much Chikombe!!!

@ValerioModica 2 года назад

Great tutorial! Followed it step by step and successfully upgraded my late 2012 MacMini!

@HugoCervantes-HARO 2 года назад

Mr. Macintosh, I just want to thank you for your dedication and outstanding work on creating this masterpiece video. Each step, each detail, is clearly covered and explained. I was able to upgrade my old MacBook Pro (7,1 mid 2010) from Mojave to OCLP Monterey 12.01 with no issues at all. Once again, thanks for your professional work. After testing the new installation for a while, so far the only problem I have found is with the Books app. Book covers are not showing up, and text on book pages (reading text) tends to disappear.I wonder if you have faced that issue and have some possible solution?

@Mr.Macintosh 2 года назад

Hello Hugo, thank you very much for your comments! I've heard some complaints with the books.app. I think the devs are looking into possibly trying an older version.

@HugoCervantes-HARO 2 года назад

@@Mr.Macintosh thank you for your quick reply. Replacing the Books app with a previous version is something that cold be accomplished by end-user, or must come from an updated patch?

@PKHari-ed5py 2 года назад

Hi Hugo, your reply is really a confident-booster for the hesitating starter. I am not that tech savvy. Thank you.

@furelkan 2 года назад

hi man i have a 7,1 too, and i did everything in the video including the #4 of the description, but i'm stuck at the installation it says 'less than one minute remaining' but doesn't finish.. did you do the steps in the description or just in the video? and does the installation take a lot of time ? (i waited 45 minutes, internal ssd, with ethernet plugged)

@HugoCervantes-HARO 2 года назад

@@furelkan hi man! I followed all steps in the video (not in the description) and it worked fine for me. I got as well the "less than one minute remaining" message, and it definitely took much longer than that (about 10 more minutes), but the process was successfully completed and my MacBook rebooted fine. I would suggest to follow just the steps as described by Mr. Macintosh, taking special attention using the correct disk formatting. That was my only issue, so I had to start the full process again. Good luck!

@felix-antoinelebel755 2 года назад

I followed the instruction thoroughly, and it worked! I got a couple bugs here and there, but thanks to the community on discord and this video I could figure out my way to install Monterey on my early 2009 Mac Pro!

@HoniSoitQuiMalPense 2 года назад

Hi Felix this is interesting for me too. May I ask what configuration are you running n terms of hardware and if you use your set-up professionally? I.e. is it reliable? What software are you using (ex. : Final Cut Adobe Premiere After Effects, Logic etc.) and is it running smoothly?

@felix-antoinelebel755 2 года назад

@@HoniSoitQuiMalPense I have run the procedure on 3 machines successfully. First I did a late 2009 MacPro 5,1 12 core Xeon 2.66GHz 128Gb DDR3 1Tb NVMe Nvidia quatro K5000 4Gb, with upgraded wifi bluetooth card. Then I did a late 2013 15 inch retina macbopok pro 8,2 16Gb Ram 1Tb NVMe. The latest i did is a late 2008 MBP5,1 8gb ram 240Gb SSD. In all cases the install was nearly flawless and I got help from the OCLP community on discord. The Mac Pro is the workhorse I use for heavy computing. I almost use it for Matlab/Simulink only. Sometimes I get laggy mouse response, but I think it has to do with the logitech mouse itself rather than the computer. I have also tried using this computer as an airplay device and i get tiny interuptions in streaming every now an then... But still I am pretty amazed with the performances I get from that 12 yr old machine! The Retina I use as a lab computer on which I run parallel desktop and windows 10. It is a good computer for misc tasks so my main MBP M1 remains for office tasks. The third computer (2008 MBP5,1) was just for the sake of trying to save this machine from going to the junkyard. It is decent for very mild applications such as web browsing but I would not want to use it as my main. I notices some gitches her and there with the color of the windows when I move the cursor around. All in all I find it pretty great that we are able to save all these machines from planned obsolescence. I get when apple would want to stop supporting older machines, but still find it shameful to throw away perfectly fine hardware. The fact that macs can last so long is a testimony to the quality of these computers in the first place.

@Aviftw 2 года назад

You are a legend. Verified. Undisputed. Keep it up. Thanks a million! On a mini 2012 i7, I had a few "Don't panic" moments. Just the installer will reboot on its own during the install, and you will get a "Mac OS X is not supported on this machine" message in the preboot environment, don't panic. Just reboot again, press option key while rebooting, choose the legacy patcher and press option key simultaneously, and then choose the "Install Mac OS" or something like that option that you will see next. NOT the "Install Monterey" you should have on your USB stick. Installed 12.0.1 and the computer feels much faster. I'm proceeding to update to see if anything happens. Also make sure you have your Apple ID up to date with all your contact info, such as phone numbers and alt emails, so that when you have to log into your account on your new machine you may not find yourself locked out of your account by accident. Just saying. I've seen it happen quite a few times.

@HarshaAtta 2 года назад

Thanks so much for the step by step video. Could you please let us know on a 2012 MBP (9,1) non-retina with dual graphics whether Post-Install Volume Patch is needed?

@CoachHectorPena 2 года назад

i have same cuestion

@RickyAlifNurAzza 2 года назад

@@CoachHectorPena me too

@mirabulhasan293 2 года назад

Hello Sir. I am from Bangladesh, Thank you so much for your outstanding work on creating this masterpiece video. Each step, each detail, is clearly covered and explained all the great info: I just finished following your tutorial, and I was able to update MacBook pro 8.1 in late 2011 13" from lion to High Sierra to Monterey using Open Core Legacy 0.4.3, and Monterey 12.3. The only major issues are startup is very slow and the battery is also draining quickly. Any advice?

@sambarrado 2 года назад

Slow startup even with an SSD? 🤔

@souvikbabanhazra 2 года назад

Thanks man for it, I was very sad after Big Sur for my MacBook Pro 2011 13" as I couldn't found any patch for GPU acceleration, now I am very happy that my old mac can still run the latest.

@WajidAli-vt7ut 2 года назад

Was stuck in installing monterey OS from couple of days, this video works, thank you sharing.

@Mr.Macintosh Год назад

Awesome Wajid! Thank you👍

@WajidAli-vt7ut Год назад

@@Mr.Macintosh Wellcome

@denzzila 2 года назад

Perfect tutorial like always! Thank you very much.

@chaiyaritpiyabootr9268 2 года назад

Thank you. Just finished the Monterey installation on my Macbook Pro Retina Late 2012. At first the screen displayed very small fonts (Sh_t!) and kept rebooting itself after the Apple Logo (SH_t, SH_t!!!!). Oh -- , I forgot to press option key after the reboot, so that problem solved :). I got panicked when the screen show 42 inches monitor on my laptop. And again I remembered that you I need to install the post installation. That took care of the problem :) :) :). Well, a million thanks to you now I am running Monterey on my Macbook Pro late 2012. I will recomment this video to all my friends.

@doogieball2464 2 года назад

Same happened to me with the small fonts and 42" screen. Good thing I saw your post. 2012 Macbook Pro Retina. Did the post installation and got stuck on the final reboot with progress bar seemingly stuck at 50% for almost 30 minutes. Forced reboot and cleared PRAM and it's all working fine.

@chaiyaritpiyabootr9268 2 года назад

@@doogieball2464 I am glad that my experience (more like blunders….Ha ha) helped. First it showed 42 inch and very small fonts, I thought I would probably have to fresh install my MacBook. Enjoy your NEW MacBook.

@saucedah 2 года назад

worked like a charm, thank you so much for putting this video together, great instructions and easy to follow.

@evilmonkeylopez 2 года назад

Hello Mr Macintosh, My 2020 my book pro was stolen. I was not able to recuperate it. I had a fantastic 2010 - 17" Mac book pro sitting in my studio. I couldn't buy a new Mac right away so I decided to use this "old MacBook Pro". Obviously al the apps were old and I need it to make it work to my todays standards. I follow all your instructions and video an I want to THANK YOU!!! My old work horse is like a new pony! The only thing I must comment is that when you explain the the Open Core patcher in terminal... you go a bit fast... but its ok. Thank you again an I wish you the best!!

@patriciapaulus1176 2 года назад

I just completed upgrading my 2012 MacBook Pro from Big Sur to Monterey by following your RU-vid video. I’m not a computer whiz by any means, but I was able to follow your instructions successfully. My MacBook is running beautifully. Thank you so much for your input. I didn’t know you could talk so fast while being so articulate. Steve Paulus

@Mr.Macintosh 2 года назад

Steve, that is great news!! These are the comments that really make me happy. I try to make these videos in a way that anyone can watch and follow along. I'm really glad that you were able to upgrade successfully to Monterey on your 2012 Macbook Pro. How cool is it that your almost 10 year old mac is running the latest OS?

@olatunjiyusufolaide5026 2 года назад

Thanks, I follow your instructions and it great I’m using Mac mid-2012, after successfully installed have got two issues with it Display brightness isn’t working and system preferences some settings aren’t open too pls help me out

@cl8505 2 года назад

Is your macbook pro RAM 4GB or 8GB?

@rk.7 2 года назад

Thank you, sir, for the detailed video; you went over everything, which was quite useful. My device is an iMac 27 Mid 2011, i5, AMD 6770M, and I'm having trouble with video/graphics. After installing ResXtreme, it was resolved successfully,; for example, when opening any app(music, safari, imessage, safari) some areas still display minor colour variations, the scrolled portions of the mouse pointer return to normal. Any suggestion/solution will be apprecited. Thank You

@Mr.Macintosh 2 года назад

Hello R K, I'm glad you made it to Monterey! If you are talking about shading issues when clicking a menu bar item, this is normal and is something very difficult to fix in patches.

@rk.7 2 года назад

@@Mr.Macintosh thank you for your reply sir, so is there any solution/fix for big sur, if ao then i will downgrade to big sur. Thank you

@Sol5t1c3 2 года назад

Quick question on either the Big Sur/Monterey; if the Software Updater is trying to update to a newer version or if Big Sur is trying to go to Monterey, will updating the Mac through that method break it because we're running OpenCore? Amazing tutorials by the way.

@mw7967 2 года назад

The quick answer to your question is no; nothing will break, if your MacBook is the 2012 or newer.

@Eduardo_1970 2 года назад

From Portugal: Thanks a lot! With this superb video with all the How-to do, tips and tricks I was able to install Monterey on my MacBook Pro 13" (mid 2012). Thumbs up!!

@Mr.Macintosh 2 года назад

Awesome Eduardo!! Keep that 2012 running strong!

@adriananzano2292 2 года назад

amazing info! thank you for taking the time to compile all of this

@makochimunye5299 2 года назад

My laptop doesn't seem to be loading to the recovery part where you select your language. It gets to the apple loading parting and gets stuck at the beginning of the loading bar. I've restarted it a few times as well.

@Mapelie7 2 года назад

Same thing here! I couldn’t instal Monterey, try a few times and nothing 😢

@vssrbhat 2 года назад

I followed the instructions. I was upgrading my late 2013 Macbook Pro from Big Sur and got stuck at the end with 25% bar done and Apple logo. I tried clean install with same result. Reverted back to Bug Sur. I didn't work for me.

@pradeepkulkarni2631 2 года назад

I too had the same issue with my MacBook Pro 15" Model Late 13. It is used hang while booting. I noticed my Macbook Late 13, always booted in Safe mode. So boot using Safe mode and then apply Opencore Legcy patcher (0.3.1) install post patcher. It works fine.

@robbieboi78 2 года назад

You are awesome! Thank you very much for the great video! After months of trying to get OpenCore working, you video got me up and running!

@nnaannnd 2 года назад

Glad to see my old macbook runs monterey now… thank you so much!

@hartefbrown1 2 года назад

Thanks so much for this video. It was exactly what I needed for the Monterey update, But everything shrunk down in size, is there a way to get it back to my previous size? In Display Setting I have no tab "Display" "Color" No option to change the scale, only 2880 x 1800 on my macbook pro Early 2013. Thanks

@zacmizampa 2 года назад

I have the same problem with the same model....just waiting for an answer for solution the problem...

@ElMalito187 2 года назад

Download and run OpenCore Legacy Patcher. Select 3. Post-Install Volume Patch. Then select 1. Patch System Volume. Follow the instructions by pressing Y and hit Enter, eventually it will prompt you for your password. Type it in and let the program do it's thing and once done, reboot the computer.

@steveb8200 2 года назад

@@ElMalito187 Thank you thank you thank you!!!

@shipwreckmisery4569 2 года назад

I updated to Monterey on my 2010 MacBook Pro7,1 and the installation went great. My problem is my Wi-Fi no longer works. I tried to use my Big Sur installer to downgrade and my computer now tells me it can’t read off of that disk. I made sure to update the OCLP to the newest version and installed the post install patch drivers as well.

@daguilar5244 2 года назад

Same issue here

@fabianokrehnke 2 года назад

Same here

@katana4615 2 года назад

Did you have any weird colors in the translucent menus? I've the same model and when finishing installing I had that.

@SleepysCats 2 года назад

you need to Connect to ethernet to install the patch

@mitchwhite1859 2 года назад

Hi,I had problem with WIFI,but it is fixed now,I followed video on youtube How to Fix Wifi or Network Issues on MacBook, MacBook Air, iMac, Mac Mini | Can't Connect to Wifi.Hopefully it helps.

@emredogan334 2 года назад

Perfect thanks! The best video from all the other mac support vids!

@Mr.Macintosh 2 года назад

Thank you very much Emre!!!

@teroxaf 2 года назад

Just installed on a 2007 iMac. Works seemlessly. Thanks!

@mattkeller7100 2 года назад

I am using a MacBook White body 7,1 mid 2010 that I used Open Core Legacy Patcher to upgrade to Big Sur. I just got a notification of the Monterey update. Can I just update natively or do I have to use this video to upgrade?

@drvoodoo3073 2 года назад

You do it natively from now on. That’s the whole point of the OpenCore Legacy Patcher.

@macpar7833 2 года назад

Thank you and to the developers of OCLP. I installed Monterey on my MBP mid 2010 and it is working flawlessly. The only problem that I am having is to get garage band running. I am getting an "Unable to initialize. This typically happens when running inside an unsupported virtual machine environment, or when running on an unsupported mac." I there a work around for this? Thank you.

@charlespilling1254 2 года назад

try reinstalling the app?

@triderg7-816 10 месяцев назад

I think you can’t solve, new programs use metal libraries. The video card on that model can’t handle them. You must find an old version of the program. I gave up

@HugoSnellenvanVollenhoven 2 года назад

Perfect solution! I was using dosdude's Catalina update on my 9.1 but have moved along to Monterey now

@cortjezter 2 года назад

Omg…so awesome. And not really complicated for intermediate to advanced users 👍 cheers mate!

@xKevss 2 года назад

Hey, Mr. Macintosh! This tutorial was such a great help. I was able to install Monterey rather easily. Thank you! I do have a couple of questions, though. I just realized that Bluetooth doesn't seem to be working properly on my Late 2011 MBP (Macbook Pro 8,1) It won't let me turn on the bluetooth. Also, there are some graphical glitches, more specifically with transparency, when transparency is active, you'll see how the dropdown menus would change color when the cursor is over that menu. And one more thing that is bugging me: I'm unable to use the "Swipe between pages" options. It doesn't let me go back by swiping with my two fingers. I'd appreciate your help on this.

@Scruffypop 2 года назад

Same issue with menus changing colour

@Domas7878 2 года назад

Me too

@abatall 2 года назад

Read the description I don’t think the Bluetooth and Wi-Fi drivers are proper

@canismajorbeats 2 года назад

Can I do this but to a external ssd?

@fredbolger 2 года назад

Yes, but Monterey boots several times during the installation and you will always have to choose the right installer in Open Core. Keep pressing ALT during boot.

@canismajorbeats 2 года назад

OK thanks guys will try it

@mavicmini2videos387 2 года назад

Yes. Complicated. Yes/No? However! Make it easy by following the tutorial but use 2 USBs. One to follow all the main stuff and instead of installing it to your Mac HDD install it to the other USB.

@jhonrheyalcantara5638 2 года назад

@@fredbolger how many times monterey reboots while installing?

@fredbolger 2 года назад

@@jhonrheyalcantara5638 Didn‘t count. Something between 5-10.

@artistmr1986 2 года назад

This is awesome! Thank you sir! My Macbook Pro 2012 is running really well. Going to try and do the same with Mac Pro 2009 tonight.

@IAmRobertAndrews 2 года назад

I used this video, along with some help from the Discord channel, and it worked. Thanks. Process for a Fusion drive has a slight extra consideration that I hit.

@matejaem 2 года назад

Man I love your content but sometimes it’s hard to follow what you’re saying because you’re talking way too fast and with no pauses in between sentences

@TdogSSC 2 года назад

Click the Gear on the RU-vid Video and slow down the playback speed.

@matejaem 2 года назад

@@TdogSSC Not the same as him speaking slower

@raphaelgastro 2 года назад

I used your last tutorial to install macOS BigSur on my mid-2012 MacBook Pro, and since yesterday the system is showing that there is an update to Monterey, giving me the option to update natively. Is it safe to use the native macOS updater to install Monterey on my mac or it can give me some problem?

@trytogetit 2 года назад

I have same situation. I'm using mbp 2009 with latest OCLP and latest big sur, It prompt if want to update to Monterey, is it safe to update like as usual via official method ?

@ClaudiuTomescu 2 года назад

Same situation here. I'm on a MBP early-2013, upgraded to BigSur using the tutorial and now I have the Monterey upgrade in Software Update. Would it work? Thanks in advance!

@JasonSantos21 2 года назад

i had bluetooth issues and overall lag after updating this way, i have the same hardware specs. i have the i7 too so i hoped it'd still run smooth but i ended up reverting all the way back to catalina since it's fully supported following this thread to hear others' experience IMO not worth updating yet i spent all day reformatting the internal ssd

@trytogetit 2 года назад

@@JasonSantos21 you can follow mr Macintosh other video of direct upgrade using OCLP. Or alternatively do another clean install. Works for me now

@juans1606 2 года назад

The best of all and for his magnificent explanations I was able to install Monterey 12.2. Thanks

@ex2ex2ex2 2 года назад

Best and simplified tutorials, To the point, No bullshit. Like it

@Mr.Macintosh 2 года назад

Thank you very much @S A

@FlagsandHonor 2 года назад

My 2012 13” Pro is up and running and is working amazingly well, I’m excited to see what the OCLP developers have in store for Ventura

@djfaheem37ify 2 года назад

This is one of the best videos with explanation I have seen, down to the last detail. AAA+++

@Mr.Macintosh 2 года назад

Thank you very much Frank! 👍

@SheriffKoder9 2 года назад

Thanks for making it possible, clear and simple 👍

@PR3SHUSPRiNC3SS 2 года назад

Thank you so much for this! If anyone is having issues with WIFI (not finding any networks or cannot put passwords in to connect etc) - you need to download the offline version of the Open Legacy Core Patcher. Connect your mac via ethernet cable, download the offline version and once installed, open it and install the post patches you need, and then restart for WIFI to be working again. I was stuck on this for hours!

@Mr.Macintosh 2 года назад

Hello Liya, You must have one of the models that had the wifi drivers removed. For the next update all you need is the latest OCLP Offline version. You will not need wifi to download the patches next time you run a macOS update 👍