MORE ABOUT ANGLE HEAD DOS AND DONT'S

Подписаться 43 тыс.

Просмотров 37 тыс.

50% 1

Do I run the smaller angle first or last?
Disclaimer: Due to factors beyond the control of The Drywall Doctor, we cannot guarantee against improper use or unauthorized modifications of this information. The Drywall Doctor assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. The Drywall Doctor recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of The Drywall Doctor, no information contained on this RU-vid channel, Facebook page, website and Twitter page shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not The Drywall Doctor
**Like our stuff? Here's small and big ways to show support**
SUBSCRIBE here! bit.ly/2yPbgYK
(We also love comments, "thumbs up" and shares :-)
Join our CROWD FUNDING effort on Patreon
/ thedrywalldoctor
*If you do this right (or even if you do it wrong too), please feel free to share! This is a community so your experiences only make this place a better resource for those who want to do their best drywall work!
Proverbs 22:29 NIV Do you see someone skilled in their work? They will serve before kings; they will not serve before officials of low rank.
Leave a comment below or email us at thedrywallphd@gmail.com THE DRYWALL DOCTOR™

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии

@wayneswasey3256 Год назад

I do 2 1/2 3. 3.5

@rickhatesmisleadia7101 Год назад

subscribed.....this guy is a pro!

@davidserrano5089 3 года назад

Show one video how calibrate the boxes and angle head

@johnconwell3160 3 года назад

Yeah, I tried the same thing with the same results.

@dennisgormley6123 2 года назад

Lets see ya pick a corner?

@tommypaintingplastering2854 5 лет назад

you should do 2 inch for tapping, 3.5 inch for finishing . You have great day.

@CForged 4 года назад

I’m a big advocate of this guy! He deserves half a million subscribers

@THEDRYWALLDOCTOR1 4 года назад

👍👍👍

@ingvarz7468 2 года назад

can you do a video about how to adjust the anglehead?

@TH-cl5be 4 месяца назад

lol thats always done my head in setting them up, Columbia will tell you to give it rock tapetech say no rock and push the end of the blade out more, you would think someone has made a on site vid by now on this it can be very frustrating, plus those tiny lil allen key studs are so easy to round off

@jeradblazek677 3 года назад

"This is not an angle head" as he moves the tin snips out of the view. 😂😂

@keithpatton9933 2 года назад

😂 Ames Tool Company was the *original taping tool company and the original instructions to angle taping was use the 3" head on taping skimmer and run the 2" on the finish coat ... this shocks me anyone did it backwards and i cant imagine using the smaller head on tape coat 😇🤔

@standeman 4 года назад

If you push a little harder with the roller, your angles will really turn out good with bigger to smaller. In other words, inbed the tape more before flushing.

@leifharmsen 5 лет назад

VIEWER REQUEST: Okay, maybe this viewer request is stupid but - cleaning tools. How clean is worth the work? Do you clean the handles or just chip them down when they get too fat? Is there a trick to a quick easy cleaning? Okay, even more important.. . how much drywall mud can you safely wash down a drain? Is it okay to wash it down once it's dry little chunks but not when it's still wet? Is it okay to wash a little down but not too much? Is it okay if you chase it with enough water to flush it through? In the summer I wash everything outside with the hose set to highest pressure but it is winter now (well below freezing) so that solution isn't an option. Should I be religious about washing everything in a bucket and dumping the bucket outside?

@ChrisLascari 6 месяцев назад

Ove never seen green board on a ceiling

@THEDRYWALLDOCTOR1 6 месяцев назад

It used to be taboo to put green boards on ceilings, but all green boards now are mold tough and that they say is OK

@David-kg1hc 2 года назад

Does it make much of a difference taking the wheels off?

@THEDRYWALLDOCTOR1 2 года назад

I don't think so

@David-kg1hc 2 года назад

@@THEDRYWALLDOCTOR1 but it does run the same? Like still as easy to push exc...? I think I'll just try it haha

@dorkyvideos5905 5 лет назад

I’m so glad you changed back, it drives me crazy to think of doing a smaller blade or head coat after a bigger one. 🙂

@ihikefar 5 лет назад

Have you ever thought about about doing a multi day drywall academy? I bet it’d be a big hit.

@jamesjams5085 3 года назад

Cmon man… It’s always from smaller to larger don’t be ridiculous I want to know what’s the better brand?

@THEDRYWALLDOCTOR1 3 года назад

Between drywall master and tapetech I think those are your two top of the line angle head

@hamidmakhmour3703 2 года назад

Hello On your next video, please have someone to record your videos for you. Too much movements. Peace

@THEDRYWALLDOCTOR1 2 года назад

Soon I still have two left but don't have a camera guy.

@timotheus3279 5 лет назад

Also, you have to adjust your blades on your dm boneheads. They are not calibrated from the factory to you.

@THEDRYWALLDOCTOR1 5 лет назад

Mine were. They're shop is just minutes from me.

@darenrigby7009 5 лет назад

@@THEDRYWALLDOCTOR1 In in Australia and have learnt a huge amount from you and am very grateful.. We are way behind here in Australia.. I just ordered a mudrunner ( thanks to you). I need to order an angle head.. In thinking the drywall master bonehead 3". Many many many reviews say they are not set up from factory but you are the first person who has said that yours was.. Where did you buy from and can you help me please get one all ready set up ?? Kind regards. Daz

@adamdavi8869 5 лет назад

Can you show all these tools in action. As a remodeler, i'm always trying to learn better ways to do this stuff. Thanks.

@Timmyskills 3 года назад

Hey doc. How much do you guys charge per sq ft to finish out in michigan?

@THEDRYWALLDOCTOR1 3 года назад

I'm not from Michigan I really don't know what the prices are there 40 - 50 cent

@kirkdunn1379 4 года назад

Must be tough, because in 35 yrs I rarely see square anything in a house...new or remodel, it just doesn't happen that often....too many variables and especially when dealing with wood framing......commercial with steel studs probably more consistent.....from framing to setting cabinets its hard to find true af square walls floor to ceiling I am sure angle heads have few degrees of play which helps I hung crown moulding for along time and it was odd to find true 90 degree walls....we have tricks and acct for it but if everything was true, plumb and square construction would be easy (like the TV shows. Lol)

@cb550rider 4 года назад

Who are the 3.5 and 2.5 heads made by?

@cb550rider 4 года назад

Im in commercial drywall and have always taped by hand. I realize what a game changer tools are.

@THEDRYWALLDOCTOR1 4 года назад

Drywall master they make very good tools

@wayneswasey3256 5 лет назад

I use drywall master I use 2 1/2 then a 3

@timotheus3279 5 лет назад

I too have tried it 3.5 then 2.5. Was told they are designed to work that way but I ran into problems. Scaring and scratching mostly. Went back to the way that makes sence to me. Maybe I did something wrong I don't know. Just gonna stick with what works (for me).

@THEDRYWALLDOCTOR1 5 лет назад

Yeah it didn't work. Told along time ago if it works don't fix it.

@kidjetrecon7153 5 лет назад

Personally better finish going up than down always can learn something new. Usually tape with two finish with 3.5.

@craigealbarenga100 5 лет назад

0:53 "this is not an angle head" LOL

@artisticdrywall7368 5 лет назад

With apla tech you have to soup your Mudd ... But I still love the Mudd runner for small jobs

@artisticdrywall7368 5 лет назад

But damn for years I pushed that angle box and omg my neck my shoulder my elbow lol

@joshuahagan9739 5 лет назад

I use alpa tech Air powered systems and I’m able to run thicker mud than I have with any other tool effortlessly. I also own I tape tech angle box and a mud runner

@artisticdrywall7368 5 лет назад

@@joshuahagan9739 nice

@str8cndian 5 лет назад

I just apply and flush, separately and i'm pretty quick

@akdrywallguy60 5 лет назад

Hey Doc, I'm with you - I'm running my 2 1/2" for glazing and my 3 1/2" for the finish skim. Besides less sanding on the edges, I've had issues with the 3 1/2" head grabbing tape from my butts and flats before it has had a chance to fully adhere to the walls. I do like the way that the 3 1/2" head skims out though - beautiful. You did have me scratching my head for a while there though... Cheers sir!

@elfindelnombre9803 5 лет назад

Eres un poco loco pero trabajas muy bien good jod very good tools and very practical what is the price of all the equipment you use

@lucabulfone937 5 лет назад

Have you ever tried the same inverted sequence with flat boxes?

@THEDRYWALLDOCTOR1 5 лет назад

No I did 7box and then 10box when +3 first came out but it crowned all the seams.

@anthonycasey6064 5 лет назад

You're like me you'll try anything and the reason I'll try anything is because I used to be an auto technician and I'm mechanically inclined so I'll try it all

@Ocanadakiter 3 года назад

Do you strip the edges when it's still wet or next day? We do it the day after. I might get a 2.5 to try this one day.thanks man👍

@THEDRYWALLDOCTOR1 3 года назад

Same day but after it's dried up a little

@Ocanadakiter 3 года назад

@@THEDRYWALLDOCTOR1 I tried it that way today but I end up leaving little lines sometimes .maybe need a knife with more flew or wait a bit longer

@THEDRYWALLDOCTOR1 3 года назад

It does really help when your knife has more Flex and sometimes if the job is small I can't do it the same day it's just to wet

@mennyvallejo6508 4 года назад

Hello God bless.sr i am a painter but i want to start to do drywall jobs.sr i got a question its the brand level 5 tappings tools good for to do drywall jobs?.i am thinking buy these tools for to start.thanks

@THEDRYWALLDOCTOR1 4 года назад

If you can get parts easy and your getting them at a good price get them. I can only recommend Drywall Master and Tape tech tools.

@biggsbiggs5336 5 лет назад

I use a 4´´ flusher the cheap one. And i finish with a 3´´ angle head. And fix when its dry with a skim with my knifs Its good for 3ways. More mud

@joshuahagan9739 5 лет назад

It seems to me that if one was to use the smaller head for the fill coat that it would leave scratch’s in the wider mud tape coat

@randyu8688 5 лет назад

I have the 3.5 tape tech angle head. I'm buying a roller and handle. Which one do you recommend? Should I buy a smaller angle head and if so which size to glaze? Thanks.

@wayneswasey3256 5 лет назад

The other thing if your up to change go with a Columbia angle box they have a no swell gasket system and they push so easy I have had mine for 3 years now still pushes the same I will never go back to tape tech

@joegrimes6485 5 лет назад

Mr ray do you star out your corners so that when u running the angle head into the corner it doesn’t dig out the wet mud from the other sides

@22shroomster 5 лет назад

Drywall doctor: Totally different topic but what types of air compressors are good for spraying knockdown/orange peel. Or any type of texture? I don't really want to spend almost $800 for the Marshalltown one

@tylerkrug7719 5 лет назад

I have a tape tech angle head that does the same thing with the spring

@sirgod9606 5 лет назад

Hi mate, what are you putting the tape on with? A banjo? Are you using a roller? Ive got an 3.5 angle head on an internal angle box, would this work with your new method for the first glazing coat?