I have a 2017 Audi A4 allroad … I’ve done everything you did on here and when I put the SD card into slot 1 and go to update it says No readable data on SD
Hello, the link does not open the page from which the patch can be downloaded. Could you make the patch available for download on another page? Thank you very much.
Siemanko. Ja trochę z innej beczki. Widzę na twoich dłoniach niezłą alergie. Jeżeli to alergia to mam pytanie czy próbowałeś na to stosować krem o nazwie Momentazon ??? Mój 3 letni syn też miał podobne dłonie i lekarz w Norwegii przepisał mu właśnie to. I bardzo mu pomogło... Czy stosowałeś taki lek o tej nazwie ??? Oglądam twoje filmy i dzięki nim odblokowałem swoje radio w VW passat b8. Robisz dobrą robotę i moze ja też ci coś pomoge . Pozdrawiam z krainy wikingów
Tried this on my golf and keep Getting a message pop up when trying to install saying unable to read the release information file. Error when reading/opening the file.section common already exists. Have you got any ideas am I doing anything wrong I’ve followed your video and can’t figure out what’s wrong any help would be great thank you
I did the procedure and I stay at the beginning vw connect with ttl uart and I access mib audi quickly to remove the feccontainer error but it doesn't take the code line how is the code entered correctly ??
Great video , I want to double check before i flash mine ( POG11) Just patching will not affect Bose amp ? And i take it updating firmware will update Bose amp , so if i just patch i should be good.
You are talking about backup that the system is making using this sd card. I have a sd card of 1go for this do you think it will be enough or should I get another one more bigger and how much size? because I have selected on the patch the necessary firmware which saved me a lot of place Thanks
I cn't belive how helpfull your videos are. Can I with this software enable CarPlay and AndroidAuto on my device? If so would you please help us out how? Thank you and God bless you SIR!
hi, I installed mib and everything is ok but I can't install the vw alpine mod, it gives me an error and goes back to the stock skin, try to install skin 5 but nothing, still the same error, I have mib2high MHI2_ER_VWG13_P4521 MU1367, in my firmware only 3 skins, 0 basic, 1 current and 4 Arabic, version of more incredible bash is 3.7
Hi! I have a Tiguan from 2017 - i've searched on so many forums and youtube videos how to active Android Auto, will this patch do the trick to active AndroidAuto? If yes you are my hero and saved me more then 500EUR from an official car dealer
Hello. I bought audi q7 4m from U.S. Is it possible to convert us navigation and maps to european by myself. And how to do it? Maybe you have video available about this topic?
MHIG will be live-patched. This means that instead of replacing the original image with one from the patches folder, M.I.B. will actually modify the existing image in the system.
Hi,will this batch bypass cp? I have a amundsen mib 2 from 2020 i believe,and how do i enter green menu on this unit,it's a displays of the without buttons,just touch.
After I had installed MIB for last map update funktioienieren with me the online traffic data no longer. only TMC still works. the annoying thing, the new map update still does not know the 2 year old road. is there also a trick for this?
thanks for your videos. I have a mib1 with component protection, how can I unlock it? download all the patches to an sd card, but it doesn't work. greetings. MSTD_EU_VW_P3163
Hola buenas lo he instalado y ahora en el módulo 5f entro para meter el nuevo código de confirmación de montaje y no lo acepta el que genera en tu página web podrías ayudarme ? Gracias
is this an mib1 system? also using this more incredible bash firmware would it allow me to unlock carplay on mib1? people on forums have told me this is not possible as mib 1 does not have the physical ability to allow carplay?
Hi; I have prepared the card as described, but I cannot activate it and the Audi A6 C7 FL, the US version after conversion, is currently MHI2_ER_AU57xK3663. I wanted to use this to unlock VIM. I insert the SD card into the unit but nothing starts... Edit: OK it Works!!! I watched another video of yours and saw that should start from the red menu
@@MIBhelper good to hear that. of course mate im concern about you and other guys who made M>I>B possible, thanks to your hard working job, we have saved many euro with DIY job :) thanks a lot
Hello and thank you for all informations you give us‼️ If I have a Harman MIB2 unit and I will make the installation like in video I will convert my unit in MIB2.5? Thank you!
hola amigo tengo un a5 del 2019 solo con un puerto de carga, aux y carga inalambrica en el repozabrazos.version MHI2Q_ER_AUG22_P5092 1329,es posible activar carplay con algun parche o actualizacion, gracias y espero su respuesta
Patched system will bypass Component Protection restrictions, bypass signature checks of the FEC container (allowing activation of CarPlay, AndroidAuto, map care, voice control, performance monitor...)
Hello mr fix once I followed all your instructions but when I press update a pop up comes up saying the sd card couldn’t be released any help??? Thanks
Hi thank you very much for your video. I got MIB installed and run the AIO, carplay / android auto is now visible from the main unit but android phone is not visible. Android autois installed and BT active. I think I miss something ? AIO should also install the lifetime maps FEC but this is not avaible in the list after running the patch. Do I need to do some additional steps ? Thanks a lot...
@@MIBhelper thank you for your replay, I am unsure about the meaning tough. May be you are asking if the android cell phone is able to read via the USB c port ? But may be your ment sonething else. What about the missing FEC ? I appreciate your support.
Hello Mr Fix, just to know correctly, if in the "20230412_M.I.B_Patches" directory, there is not my version (there is only the latest firmware), can i use instead the patch ? or should i put the last firmware wich is good in the "20230412_M.I.B_Patches" directory ? thx by advance.
for example i have the 150 version, and on the patch directory there is only for the 155, so i need to update my FW to the 155, and then, use the patch or ?
thanks for the job. I updated my VW 5G0 035 043 C mib high post with the K1550 version. after I installed mib 3.7. after I patched it all in one aio. everything went well. I noticed the number of the unit became 5G0 035 043 D. I wanted to have mirror link or app connect. but nothing. is there a way to have at least the mirror link? thanks in advance
Hi , i updated the unit, installed GEM and patched , but i get the AndroidAuto / Apple Carplay / Mirrorlink screen , but when i connect Android or Apple cable nothing happens , what could be the issue ? i have VW MHI2 unit
Hello, the link does not open the page from which the patch can be downloaded. Could you make the patch available for download on another page? Thank you very much.
How can I convert from EU to RW train? I have successfully converted my MHIG unit from Japan to EU (MHIG_EU_VW_K1550). Since there is no convert to RW option, how do I manually convert to MHIG_RW_VW_S1534?
Hello MIB Helper.. I need some help.. Im not able to use carplay in my car... at the time I connect the phone, it is recognized and the messages to accept the carplay function are correctly prompted, and both are accepted, however nothing happens, there is no prompt message in the iPhone (just the charging icon), in the device controller of the mmi the iphone it is displayed as available for the Audi smart connection but after few seconds it gets disconnected... so looking for a solution I found your videos, and so far I have updated my mmi from MHI_US_AUG22_P3252 MU: 0692 to MHI2_US_AUG22_K3345 MU:1439, also I have installed M.I.B and applied all the available patches... but no luck... still not working... do you know if there is something else I can do? or definitely my system is not compatible with car play?
try this: remove iPhone from MMI bluetooth list, remove MMI from iPhone BT devices, make sure Siri is enabled, make sure USB restrictions on iPhone are disabled, make sure there's no lint inside the lightning connector, make sure iPhone is unlocked and on homescreen before you connect the USB cable.
Hi, thanks for the video. I have a Polo 2021 car and software version installed is : MOI3-RW-VWMQB-P27800P (version 278), I need help wich version can be installed on it and can app connect be activated ? Your help is appreciated 👍
Honestly that’s just a precaution since I’ve seen reports about recovery modes stuck because of this setting. Not sure if that was SD card specific, recovery version specific or what.
have a question bought 2019 tiguan japan import Software version is "MHI2_JP_VW48x_P1101 AW7"... and I want to install "MHIG_EU_VW_K1550-AW7".. I prepared everything according to your videos.. just want to make sure if I can change patch, not only upgrade the same version.. you are great by the way.. thanks for all the explanatory videos 🙏
Witam i dziękuje :) bo dzięki temu filmikowi udało mi się aktywować android auto , ale niestety po podłączeniu telefonu do USB nie ma żadnej reakcji , ani na AA , Car Play , czy Mirror Link. jednostka zaktualizowana do MH12_ER_VWG11_K3342 Pozdrawiam
Hello, i followed your video step by step and when i insert the SD card i get an error saying that file “release info” cannot be read and section common already exists. What should i do? Thanks
I managed to enable the green screen, but I'm getting "unable to read the release information file. Error when reading/opening the file." please assist.