Hi mr-fix, thanks for your very good and helpful videos. MIB installed in my Audi Q2 and it works perfect !!!! Not a single issue observed during the full installation and patches process. Thanks again
Hey you forgot to mention to download the patch file and place it in the “Patch” folder (without extracting the content - I.e. the specific folder itself. Thanks for the vid btw :)
I installed this and managed to get Audi smartphone interface appear. But Android Auto says "no device supporting the audi smartphone interface is connected.". I have tried different phones and cables.. 🤔 Q7 2016
Hy Mr-fix. I have a problem with the MIB2 unit of my AUDI TT 8S 2016. MIB2 drain a current of about 1.5 amps even the engine car is stopped. I hear the MIB2 fan continuosly running, also after several hours with car stopped (with windows open in order to hear the fan). The MIB2 unit works correctly (sound, radio, phone, navigation, USB, etc.) with no warning/alarm messages on the virtual cockpit. The normal operation is that some minutes from turning off engine car and the virtual cockpit and open doors, the MIB2 fan should turn off. Could the problem fixed with a M.I.B. ? How? Thanks
Hello I have a big problem After installing the patch, the sound in the car stopped, only the squeak What should I do? Other thing that CarPlay is working but with squeak again Audi q7 (fw: mhi2-aug22-k2161)
My Audi Q7 has another version for the MMI version 1421, it just shows me that in the MMi version I tried to update but unfortunately once the sd card was inserted the car did not find it from update to install Solutions?
I have mhi2q unit and 5092 software. Could you please share if there is a video explaining how I can activate the 2022/2023 ROW map?? or a text document.
Added the green menu but cannot get ASI or carplay to activate… am I missing a patch? I feel so close yet so far🙄🤦🏽♂️ 2016 A6 3g High - MIB installed can access green menu but not upgrade firmware
Please can you share with me the MIB 3.2.0 file so that I can install it to able to have the GEM (Green Engineering Menu) which will automatically add the activation key 023000ee (Maps) ?
Hey! Awesome work! Would you be kind to share ways of patching mib2 delphi units to be able to install generated SWaP codes (from another tutorial of yours)?
Hey is it possible to update the MHI2_ER_SKG13_K4524 with MHI2_ER_SKG13_P4526? I don‘t know what K or P stands for. I just want to unlock Apple Car Play. What tool should I use? Best regards from Germany
Great video, maybe in english menus also would be nice. Do you know if we can activate the audi connect and/or trafic with this MIB solution ? do we need to patch or acces another menu insed the tool to make it happen? thanks.
Hello, thank you for this video ! I have an Audi Q7 4M with version MHI2_ER_AUG22_S2140, can I install M.I.B directly ? Without updating the firmware because I have the Bose system..
Great video! in the github instructions it says "It is not recommended to flash with running engine" do you know why? How do you even use an external power? Like the one that charges car batteries?
hello, I have a 2017 Audi Q2 and my mib2 version is MHI2_ZR_AU276_XXXXX. Unfortunately, I do not find any compatible version of your patch, and also I cannot update my maps (which is my goal). Could you help me ? Is there any issue with Audi Q2 ? Anyway thanks for you job.
Hej, świetny poradnik :) Czy żeby włączyć Green menu za pomocą obdeleven to trzeba mieć jakieś kredyty na koncie ? Jak to technicznie wygląda z tymi kredytami ? VCDSem też można to zrobić ? Pozdrawiam.
Rozumiem, wracając do pytania do włączenia zielonego menu potrzebne są kredyty? Przepraszam że tak drąże temat, jestem zainteresowany zakupem obdeleven, stąd moja dociekliwość.
I've watched the video several times now and I can't see how you have installed the CarPlay patch? It appears from the start you already have CarPlay installed, is there a video showing how do do this please?
Hello @MrFix,first thanks for the video. I have a Q5 2018 with unit with Bang Of Lousen, can I install it? or I need to do something more for the B&O system? Again, thanks so much from México.
How can I reset the mmi. I did all the steps and successfully entered mib and patched it successfully. But then I don’t know that happens my system locked..😢
absolute great job One Question if the Launcher Install have success and after reboot and waiting 10min... the Green engineer menü not come up with the key combination any solution or did it happend someone this phänomen ???? next step i will try log with vcds check but normali combination should work right audi A5 2017 MHI2Q.....
What METHOD do you recommend to activate CarPlay/AA for a MHI2_ER_AU57x_P3634 - Audi A6 2018. This one with M.I.B or the one with updating to "MHI2_ER_AU57x_K3663_1_MU1425_AIO" ?
@@mrfixpl Hi, I just activated with 3663 AIO method but only Android Auto is working. CarPlay not. Both USB don't have smartphone ICON on them, it''s because of that?
Cześć mam mam MHI2_ER_AU57x_S2519 chciałem wgrać M.I.B, żeby odkryć zielone menu, zrobić aktualizację oprogramowania na K3663 oraz zrobić aktualizację map mam teraz 2018/19 na 2022/23. Jaką zalecasz kolejność instalacji? Z góry dziękuję za odpowiedź. Pozdrawiam
Wgraj 3663 AIO. Z automatu wrzuci najnowszy soft, odblokuje GEM, aktywuje CarPlay/AndroidAuto i wrzuci kod na najnowsze mapy. Tu masz filmik: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VS21Lyess7o.html
Hi, could you please help me how to reactivate the original Audi Rear seat entertainment - it sopped to communicate with AUDI MMI - everything else with tablet works well, even connection with audi hotspot is ok, but both tablets shows that there is no connection with mmi.
what happens if I uninsatll MIB?, when I put it in reverse gear the 360 camera does not show me the car, just a black square - this happened after I patch with 3.6.0. m.i.b. If I unistall this patch will I have the original SW installed?
Hello i have successfully followed the guide till the end but after the reboot I can't see the mib option in the green menu anymore. And where should I download the carplay and android auto patches?
Hi, I have a 2015 Audi TT with the following train version: MHI2_ER_AUG24_S0530 MU Soft: 0139 I've ran the M.I.B2 SD Card update successfully, but cannot access the green menu with the key combination. Checking the logs, it would appear that i get a lot of "Memory Fault (core dumped)" messages. Googling this and looking on your wiki sugests it is an out of date firmware. I downloaded the latest firmware for the TT from your website, but when i try to install it i receive an error message saying that the train is blocked. What am i doing wrong?
Hi :) I have MHI2_ER_AUG22_S2140 software version. Is it safe for me to do this procedure to my mmi? After doing this, what do I need to do to enable android auto? Thank you very much 🙏
Czy za pomoca green menu mozliwe jest usuniecie bledu ktory wpadnie do 5f po anulowaniu"dokumentacji wstecznej" ? I drugie pytanie bo tez gdzies czytalem ze przy instalacji lepiej podlaczyc prostownik niz instalowac przy wlaczonym silniku (jak dla mnie to obojetne, byke by niczego nie dotykac podczas instalacji). Poza tym swietna robota !! Pozdrawiam.
can not find any info about mhi2_er_vwg11_p2125_1, who can help? Don't find how to go to the red menu. after installing this on sd card, try to do through the menu for 3 sec and update, get 146 error and don't know what to do with this(
@mr-fix, the MIB was installed according to your video. I also selected continue & cancel, before the third reboot. However, I'm unable to get the green menu with the combination you've provided. My car is AUDI Q5, software is MHI2Q_ER_AUG22_P4170.
@@mrfixpl Thank you. so we also need to enable the Developer mode first with OBDeleven tool to access the green menu. In the above video, you mentioned some systems get the green menu with only the software. I have exactly the same MHI2Q version. Is it because my car is a Q5 and not Q7, that is why it's not working? While using the button combination, it directly takes me to maps and nothing happens even holding for 10 seconds. The red menu works fine with combination shown.
Thank you, the green menu combination worked. According to another forum, i selected the option "patch_ifs_root_aio" from green menu to fix FEC codes map updates. I'm still not getting the maps update to work, it says "no valid update data found on the medium". I have all the activation codes legal including one of them starting with 023. could you please help me how to get the 2022/23 maps to work.
Before selecting this option you need to download patch package (around 400MB) and place it on the SD card. Only the patching can be done successfully.
@@mrfixpl Thanks for the information, already downloaded the patch package but didn't know what this one will do. Is there a way to only update the FEC codes for maps instead of running the "patch_ifs_root_aio", as I already have the wired carplay functionality. I want to keep my software updates to a minimum if possible. Also please let me know if there is a way to convert my wired carplay to wireless using a software update. There are adapters online which make this happen however prefer if there is a software fix.
You write in your guide: No SD => No GEM. Meaning that a USB drive cant be used instead of a SD card?? I dont have access to a SD card reader, which is why I am asking. :-)
@@mrfixpl It should work just fine if Audi hasn't made some sort of prioritization on their input sockets whilst updating the firmware of the MMI. One more question tough, how do I open the green menu in a Audi A6 from 2017? And thanks for your rapid response. 😊👍
Hi thank you for your video or update after 2 reboots but asked to connect diagnostics to clear errors .. I was unable to complete the installation though or noticed that the new series encoding has been changed I ask how to activate the car play from the green menu is it possible? Thank you
Hi mr-fix I have MIB2 high headunit in my B8 Passat from 2015 I managed to update my sw and navigation thanks to your videos. I even activated android auto and performance monitor with your MIB toolbox. So first of all a big fat thank you 😊 But there is one thing what I noticed recently, I dont have bass on my rear door loudspeakers only high pitch (I dont have woofer in the trunk). I had bass before. Is this something what I messed up durring updates and activations or my speakers are just broken? Previous sw version: Mhi2_er_vwg11_s0259 Current sw version: MHI2_ER_VWG11_K3342 I updated my sw in 2 steps but I cannot remember it was K0261 or P3301
Thanks. Is this tool solve this problem? We have a problem about map installing. We also watched your MIB update and did it, it works. And then we try to update the map and we faced with "No valid update data were found on the medium" error. When we install this tool can we activate personal options of map update? For example we have only one map licence code on the medium and we think it includes only our country. Maybe we should chose only our country's options when we try to update the map.
Hello mr-fix can i use this to enable vim (video in motion) ? My SW Train is : MHI2_ER_AU57X_K3663 I already have carplay and AA but i want Video in Motion can you answer thank you ? And probably dont need patches for VIM?
Witam.Wszystko zrobiłem tak jak opisałeś pomimo tego moje auto nie widzi tego patcha.Po rozpakowaniu mam za mało opcji.Jak będziesz miał chwilę mógłbyś zerknąć?
Hi, thank you very much for your videos. I did all todos like in your video to get the MIB Entry in the green menu, but is not display. Do you have any idea?
I installed the tool and have the green MIB menu, but the VIM unlock does not work on my Audi A4 2018. It says VIM is set to 199km/h but still it won't play the video while car is in motion. Any advice? Thanks
Hi. After installation my unit(MHI2_ER_AUG22) can not see SD card with map update. Before it could see it but license was expired, now I have 023000ee but can not see an SDcard.
Hi,MST2_EU_SK_ZR_P0369T mib2 bolero software version is installed. mib2std.toolbox does not appear in the green menu, how can I do it? Can I bring the mib2std.toolbox command to the green menu?
Hi! Thank you very much for all your tips! Do you know if this is going to work on audi Q3 (F3) without Audi Smartphone Interface (only charging USB)? I can't find "hidden menus" key combinations for my MIB2 High because I only have a touch screen! Thank you!!