Morris Minor - Removing Panels - Part 11

Подписаться 20 тыс.

Просмотров 24 тыс.

50% 1

Whilst cleaning up the engine in the background I have started stripping the body down ready for rust repairs and paint.
These tools from Supercheap Auto came in really handy in this video:
ToolPro Bolt Extractors:
www.supercheapauto.co.nz/p/to...
ToolPro Angle Grinder:
www.supercheapauto.co.nz/p/to...
ToolPRO Eva Socket And Accessory Set - 98 Pieces
www.supercheapauto.co.nz/p/to...
ToolPRO Eva Pliers - 3 Pieces
www.supercheapauto.co.nz/p/to...
ToolPRO Eva Screwdriver Set - 12 Pieces
www.supercheapauto.co.nz/p/to...
ToolPRO Low Profile Garage Jack - 3000kg
www.supercheapauto.co.nz/p/to...
ToolPRO Car Stands - Ratchet, 2000kg
www.supercheapauto.co.nz/p/to...
The car is a 1958 Morris Minor 1000 with the 948cc engine. Last WOF was in 1995 and has been parked up ever since.
Here's the rest of the series:
Part 1
• Barn Find Project Car ...
Part 2
• Barn Find Morris Minor...
Part 3
• Morris Minor - Coolan...
Part 4
• Morris Minor - Cleanin...
Part 5
• Morris Minor - Compres...
Part 6
• Morris Minor Engine Re...
Part 7
• Pressure washing the A...
Part 8
• Morris Minor Cylinder ...
Part 9
• Morris Minor - Cylinde...
Part 10
• Morris Minor - Strippi...
Proudly supported by Supercheap Auto
www.supercheapauto.co.nz/
Music from Epidemic Sound
www.epidemicsound.com/
I use TubeBuddy to manage my RU-vid bits and pieces. Check it out here:
www.tubebuddy.com/badgertronix
Now we're on Ko-Fi:
ko-fi.com/badgertronix
Get in touch:
badgertronix@gmail.com
Check out my Instagram:
/ jdcorr918
Send me stuff:
Badgertronix
PO Box 82
Sefton
7445
New Zealand

Авто/Мото

Опубликовано:

21 апр 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 100

@Badgertronix 5 лет назад

Make sure you check out the rest of the videos on the Morris Minor restoration. Thanks for watching!

@garyphillips7993 5 лет назад

Oh to live in a climate like yours where cars don't rot before your eyes! My split screen moggy didn't have any jacking points, or decent place to jack it up left! It was like net curtaining after I stripped it. Sadly, never finished it, had to let it go for various reasons. Always good to see the Mrs involved 👍

@Badgertronix 5 лет назад

That would be a sad ending. I'm very lucky that this is in such good shape even with our favourable climate. I'm glad I've finally found a project the Mrs is interested in. Cheers

@jimo4449 2 года назад

I keep seeing more tools that I have needed but did not know existed ( tool pro nut extractor ). It is getting expensive watching this channel

@rustybum2 5 лет назад

Well Mr B, this is taking me back over 30 years to the first time I restored my 1970 Traveller, I'm now in the middle of doing it again! Believe me, so far you have been extremely lucky firstly finding such a decent car to start on and secondly with a relatively easy strip down. I ran out of juicy swearwords struggling with all the badly rusted nuts and bolts---that was in the UK---salty roads in winter. Great series, enjoying it immensely, thanks for sharing.

@Badgertronix 5 лет назад

Fantastic, I'm glad this series is bringing back fond memories. Stripping the driver's side is proving more of a challenge, the nuts and bolts seem to be a lot more difficult to get out. I'm getting there slowly though. Thanks for watching

@whatnextsunshine3046 5 лет назад

What a beautiful car!

@Badgertronix 5 лет назад

Just wait until it is finished 😎

@garynumanfan 4 года назад

I'm currently doing this on my wife's moggy. I too haven't done this before, so I'll be watching these if I get stuck. 👍😀

@nickelnoserestos2598 5 лет назад

Want one! So cool!

@Badgertronix 5 лет назад

Should be a fun car once it's finished 😎

@D6Spanky 5 лет назад

Such a cool project!

@Badgertronix 5 лет назад

Thanks Spanky, it sure is!

@D6Spanky 5 лет назад

@@Badgertronix And I can guarantee you it's in better shape than my 66 Volkswagon Beetle!

@Badgertronix 5 лет назад

I can only imagine how rusty that might be. Enjoy!

@andreaalvarez4587 4 года назад

Muy buen trbajo te felicito

@txsviking 5 лет назад

It's really in good shape.

@Badgertronix 5 лет назад

It really is. Not much welding for you to cringe at 😂

@SteveRobReviews 5 лет назад

Nice teamwork with Mrs Badger. Surprised to hear you can still get body parts. Good stuff 👍

@Badgertronix 5 лет назад

There's a huge aftermarket for these cars. Cheers buddy, she has been enjoying getting her hands dirty 😊

@DanafoxyVixen 5 лет назад

"Surprised to hear you can still get body parts" They still make them brand new! in Sri Lanka I believe

@mostlymoparih5682 5 лет назад

Good show mate.

@Badgertronix 5 лет назад

Cheers mate

@joshonthetube 5 лет назад

Good job there, and with good assistance! Overall the car looks super solid. Glad to hear that parts availability is good, but even if you had to make some of those panels by hand, they appear to be mostly flat and easy enough to create. I'm jealous.. I live in the SMA part of the world, where rust is usually a bit more extensive.

@Badgertronix 5 лет назад

I'm glad there are some rust spots to help me develop new skills. It would be a boring project if nothing needed fixing! I couldn't cope with SMA amounts of rust. Cheers

@edwardmckenzie3402 5 лет назад

Nice to have a Mrs Badger to help!

@Badgertronix 5 лет назад

Defintiely! We don't always get to do much together so I'm glad she's keen on this project

@paulmayou370 5 лет назад

Nice to see Mrs B lending a hand and the body is in great shape for its age

@Badgertronix 5 лет назад

Are we talking about the car or Mrs B? 😂😂

@paulmayou370 5 лет назад

Badgertronix either way what makes you happy 😃 lol

@Badgertronix 5 лет назад

😂😂

@1chish 5 лет назад

Blimey mate that bodyshell looks pretty sound. You can hear the quality of the metal when you ding it. Its why they were pretty heavy for a small car. It is certainly worth getting the shell and all the panels to a shotblasting outfit and then etch prime it. Beats hell out of wire brushes and you end up with a sound base for paint. I am doing a '78 Mini 1000 and it worked for me.... Nice work though and I hope you have fun but you were VERY lucky with the wing bolts!

@Badgertronix 5 лет назад

It's very impressive how well it has held up. Shotblasting is an option but I don't like outsourcing work! I'll probably start doing it by hand then get fed up with it and send it to the blasters... The rear wing on the other side is proving a bit more stubborn to get off. Cheers!

@piperdoug428 4 года назад

Ha!! sneaked up on ya bud

@darrylmcleman6456 5 лет назад

That's funny I was just thinking I have not heard from Badertronix for some time. Wonder how Morris is coming along. Thanks for another video.

@Badgertronix 5 лет назад

Sorry mate I've been on holiday 😎 Should hopefully start to make more regular progress from now on. Cheers

@buzzsah 5 лет назад

That is a car I could have fun with. Nice.

@Badgertronix 5 лет назад

It's a satisfying car to work on. Nice and simple

@piperdoug428 4 года назад

Just subbed, i may or may not have just found myself a moggie in the middle of the Canadian Prairies, no one knows yet, shhhhhh!!!!

@Badgertronix 4 года назад

awesome! Welcome

@angeldawnmorningstar 5 лет назад

LoL that car is almost as simple as a Renault 4cv 😏...we like it 🧡🧡🧡🧡🧡

@Badgertronix 5 лет назад

My mum used to have one of those. I want one!

@mikebills9343 5 лет назад

She’s in amazingly good condition , the ones I used to work on the rear springs were always in the back seat , ie gone through the floors ! Great cars though , used to get mine upto 92 mph how far the clock was out I don’t know !

@Badgertronix 5 лет назад

All of the important bits are nice and solid. Hopefully I can give it some performance with the engine rebuild. Not sure I'd want to do 92mph with drum brakes all round!

@parrotraiser6541 4 года назад

How much did the body flex after the doors were removed? (This car looks reasonable sound, but if the chassis's a filigree of rust, the doors may be the only things keeping the car from folding in half.)

@CarsExposed 5 лет назад

Nice to get an extra hand mate 😊... She didn’t look to bad for the age, apart from couple spots as expected 👍👍👍

@Badgertronix 5 лет назад

She has offered to recover the seats too! It has a lot of potential and hopefully I can get it done in a reasonable time frame. Cheers mate

@CarsExposed 5 лет назад

Badgertronix she’s a keeper mate 😊😉, I have to show this video to my wife 🤣🤣, Congrats again 👰🤵👍

@Badgertronix 5 лет назад

Haha thanks mate. Did you get the package I sent?

@CarsExposed 5 лет назад

Badgertronix Yeap i did thanks very much has Been hard not to munch on anything, waiting for another sticker to arrive and I’ll do a mail call video 👍👍👍

@Badgertronix 5 лет назад

Awesome mate. Our post has been shocking recently so wanted to make sure you got it 😎

@rustybum2 5 лет назад

Just a thought, use stainless nuts and bolts for putting back the cill finishers, and MIG welding just takes a bit of practice, I found gasless, flux cored "MIG" is a bit too fierce for bodywork, I use a cheap outfit and a pub cylinder and it always works fine for me. Good luck.

@Badgertronix 5 лет назад

There will be stainless nuts and bolts as well as plenty of rust proofing on the finished product! I have a few welding friends so I should be able to get hold of a better setup and some hands on advice. I will definitely be doing the work myself though, all part of the learning and enjoying. Cheers!

@kenvaughey7255 5 лет назад

Unless you absolutely have too, I would not recommend you removing the rear windscreen, they are a pig to get out and an even bigger pig to put back. The problem seems to be caused by the screen rubbers being thicker than the originals, so you have to exert a lot of pressure to push them home, original glass is getting harder to find. The rusty panel on the inner wing is called the flitch. Welding is not the dark arts that many will have you believe, practice makes perfect and cleanliness is king. If it helps, this has to be the best example I have seen, solid inner wings? unheard of in the UK. Good luck, looking forward to more.

@Badgertronix 5 лет назад

Thank you for the advice. I had heard about the issues with the replacement rear window seals. The current one is cracked and perished and I think it would spoil the look of the finished car if I didn't replace it. I shall consider the options. As for welding, I can make metal stick to metal but I only have a gasless mig which is less than ideal for bodywork. I'm working on a better solution. Even for an NZ car I'm amazed at how solid it all is. I have a late 70s Holden that has been on the road more recently that is in a far worse state with holes everywhere.

@stephenborsbey4350 5 лет назад

thats called the A post. where the bodge filler is. not much rust though as you are not in the uk. and in a drier country. good job.

@Badgertronix 5 лет назад

Thanks for the info. It is a great part of the world to run a classic

@ziggassedup 5 лет назад

Do yourself a favor Johno and get a proper impact universal...I've seen those ones do ferocious damage when they let go..All in all that old bugger doesn't look in too bad of shape...Someone was real pleased with that repair at the time I'll bet...Time for some sneaky product placement mate.?.

@mikebills9343 5 лет назад

Ha ha I never mentioned stopping !

@xbrod7827 5 лет назад

If you can get new panel should be able to get screen rubbers

@TheCowgirlNiamh 5 лет назад

Good job Jonathan! Digging the music lol I feel like I was at a strip club for cars which is apt 👍😂😂😂 Oh and that was a quality repair right there lol superb workmanship ☺️😂😂

@Badgertronix 5 лет назад

Haha I didn't think of it like that but that's exactly what was happening! I'm not sure who could do work like that and be happy with it at the end. Cheers!

@stevegreenwood7837 4 года назад

Hi good stuff just subbed .:-)

@RecordCouncil 5 лет назад

Those sill finishers are a pig of a job. I think I had to angle grind about half of my bolts off too.

@Badgertronix 5 лет назад

I only tried to undo the first one that seemed to be in the best shape. Quickly gave up and went for the grinder.

@jaggass 5 лет назад

Does Morris Minors have 2 subframes like Mini's?

@Badgertronix 5 лет назад

I don't think so

@RecordCouncil 5 лет назад

No, the Minor is unibody.

@edmarkham2632 5 лет назад

I was wondering how long you were going to breathe all that dust and dirt. Nice job, so far.

@Badgertronix 5 лет назад

Just a bit of old mud from clean, green, New Zealand 😂

@howard81 5 лет назад

To remove the windscreen just cut the rubbers and then lift the glass out!

@Badgertronix 5 лет назад

I hope it's that easy! Thanks

@xbrod7827 5 лет назад

Push and peel the windscreen rubbers from inside out use a screwdriver to help move the rubber as you use a bit of pressure on the glass with your feet the glass is pretty strong but just pressure don’t kick it

@Badgertronix 5 лет назад

Thanks for the tips. I think the biggest issue I'll have is getting the perished rubber out.

@bill90405 5 лет назад

Cut the inner lip of the rubber off with a utility knife then push out with foot power

@xbrod7827 5 лет назад

William Schleicher think he wants to save the rubbers

@Badgertronix 5 лет назад

They're beyond saving, I just don't want to break the glass

@johnbrown1835 5 лет назад

Just a tip don’t grease the steering lower trunion if they are badly worn they may pop out causing the wheel to fold under the car actually had this happen luckily at a very slow speed

@Badgertronix 5 лет назад

I had heard about trunion issues. I may well put some new ones in to be safe

@johnbrown1835 5 лет назад

Just another tip to remove windscreen and rear window ,remove chrome insert in rubber this should make rubber pliable enough to squeeze rubber into channel where chrome strip was and loosen glass