Most common problem if your brake lights wont turn off on your car , truck , or suv! 

I actually searched for where I can find my break light fuse, to turn off the light, instead I found this. This is the real, unerline issue I had. Thank you bro!

Cracked me up when I looked at the floorboard and see the broken pieces of green plastic. Thank you so much.

This was so helpful. I fixed the problem. Here is another tip for those with the same problem - get a 'flip flop' and cut of the stopper from the underside. This stopper is exactly the right size. Strangely enough, I had cut one off only yesterday, so I took it to the car and it fit. So if you don't have the part, use that bit from the flip flop until you can get to a garage. 😘

I also searched for fuse to shut off my brake lights and found this video and sure enough I found the broken plastic grommet. Thank you for posting this great trouble shooting video.

Thank you that was exactly the problem😊 the part is called "brake pedal stop pad"

Saw the broken pieces on my floorboard this morning and thought it was broken candy , wow very helpful headed out to purchase the piece!

Omg! Thank you so much! I checked and that broken piece was all on the mat. Mechanics are close so I just put a part of the piece in position so the battery's car doesnt die. Thank you. Pura vida 🇨🇷

Thank you! Quick, accurate, and to the point. Perfect RU-vid video.

my dad came home today with the same problem. went on youtube and stumbled upon your video. saw pieces of broken plastic on the carpet under the brake. we put something in between for the meantime to turn the light off till we get that button type thing. thank you so much for this video

So many weird little quirks with these trucks, I had never heard of this one. The Sequoia community is the best thanks for sharing!

Thank you. Just went to my truck to check it out, and I immediately saw the green plastic pieces on the floor mat.

Sheeesh, thank you for the info. My rear lights were stuck on today and I looked down on the car mat and there was my issue. The piece broke off, easy fix. I’m glad we got RU-vidrs like you. 🙏

Same situation here...I was headed to work, came out to start up truck, and had no power... ok I thought, get my battery pack charger and charge my battery. Didnt notice my brake lights were on until it became dark outside... Then I scratced my hea s puzzled to what waa was going on. Checked fuses like one would do first, all checked out... Searched out youtube and saw your video... I laughed so hard when you mentioned the little green plastic pieces... Thats exaclty what I saw on my floor board the afternoon before.... I thought it was something I stepped in and didnt think twice about it..... I piked up the pieces and threw them away.... Now I know.... I feel excited now.... Thanks for your video Sir....

Thank you so much.. I have a 2002 honda crv and it did the same thing. Checked out your vid and it was that. I saw plastic parts on my floor mat. I put a piece of cardboard with tape until I stop by autozone to pick up the part.

Thanks for the accurate and to the point description of the problem. Yesterday my brake lights on my 02 Sequoia would not turn off. So I spent a little time on the Internet trying to find the issue. And I only spent a little time because of your video. After watching it I walked back out to my car and there were the little green pieces on the floor mat. Problem solved. Thanks again for your time.

Ford Ranger 2006. Thank you for your information 🙏

I can’t believe that this was actually the issue for my Santa Fe lol. I found the broken piece on my floor mat after watching this

Very helpful, thanks so much. Found the broken gromet, found a replacement @ a local auto parts store, and after 10 min of angling under the steering wheel, I was able to push in the gromet! This saves me so much time and worrying about my battery before I could get to a mechanic. 🎉🎉🎉

Went to my floor board and yes saw the green plastic buttons broke great vid thank you

It was about 11:30 at night on Saturday when my son saw his brake lights staying on. Your video gave me the temp fix needed until I could get the part or find a substitute. Thank you so much from a mom who is not a mechanic!

I did replace with the rubber piece, but after about 2 years it wore down and the brake light kept coming on again. Then I replaced with the hard plastic piece ( similar to original) I think Auto Zone sells the kit with both rubber and hard plastic.. - may have to shave the hard plastic a bit like me to make it fit. That was 4 months ago, still working. I did this with the engine off and it was very difficult to do. So turn the car on as this video tells.

2001' Toyota Sequoia: Thanks for a very clear and short video of the problem with solution. I bought the piece from O'rileys for &10 and installed it in 10 minutes.

Very helpful. I would have never thought to look there. I didn’t even notice there were pieces on the floor of my car until after watching your video. Thank You.

This was so helpful! Brake lights on, looked for green parts--they were THERE! 2004 Tundra, 220k miles. Actually called local dealer, picked up part for $5 and my husband got it installed with a little help from me and your video. Thank you!

Thank you!!! You are one of the few who actually showed both where the part goes AND how it gets installed. It might seem super obvious to most people, but I fix a lot of different stuff on my 2000 Corolla and it still wasn’t entirely clear what I needed to do to get the bumper in the right spot. I appreciate this video so much!

Hey man all I’m going to say is thank you your saving a lot of money for people 🙏 god bless you

This just happened to me 2 days ago with my toyota echo. I replaced the battery thinking it was that. A co worker told me what this video explained at work last night and it made sense. Thanks

My Toyota t100 had the same issue and I been driving around trying to get a bump to get my lights working and I decided to go to RU-vid and first video I came across and I went and saw my mat with some small tab that broke

my brother in law turned me on to the little clear stick things you put on cabinet doors so they don’t slam! same thickness as the broken plastic thingy.. clean the metal bracket and stick it on.. perfect! If it doesn’t stay for ever.. keep the rest in the glove box!

Thanks. I fix my car after two days unplugging the battery every time i use it

This just happened to me today in my 2003 tundra sr5 found the green plastic and everything thanks alot thought I was dealing with some electrical problem

5⭐️ video! Excellent information. Went to local auto parts store and installed in less than 2 minutes.

You are right! I was wondering what those little green plastics were. 😂

Why evry body is not like you simple helpfull . You are legend . Please more

Great video. Just an fyi depending on your car the piece could be a clear rubber, my Acura TLX was.

I had black crumbles on the floor! Fixed the issue for the night with a penny.

Same thing happen to me I found my piece was broken , so I ordered some more spare grommets and popped it in and bam now my lights are off 😎

Thank you sir you are a huge help. My battery died overnight because of this exact issue and I was wondering what that green stuff on the floor was!

Thanks for the help. We had the same issue, placed a small bolt, washer and nut. It solved the issue without purchasing a new spare part.

Yes, yes, yes-green pieces on my Tundra floor mat.....great video, short, to the point, and of course, accurate dx of the problem..thank you🛻

Thank you so much this was also the problem with my car but instead of the rubber falling off , the little switch has dug a hole thru the rubber making it not press down!

Thank you!!! you hit it right on the target. i was wondering where the green pieces came from and you explained it!

Thank you for this post. We used a Mexican quarter for a temporary fix until we get replacement in, but exactly what you said the green pieces where on the floor

HI, you video is short but very informative in how to put that little piece, appreciated for your video

Exactly what you said is exactly what i had.

My man I thought it had something to do with the break peddle and checked that before your video but didn't realize it needed that plastic there and what do you know I found that plastic your talking about! Thank you so much your the fucking man!

Thanks you and yes my issue ... easy fix except im in the philippines so had to make the part myself ... easy job though

I should have watched this video before taking it to the shop!

literal life saver ty so much i was dealing with the same problem

Thank you so much - this was my problem as well!!!

Thank you for this video! I am not at all a car person but i followed your video and it worked! 🙌🏻

Great video, that was exactly the issue! Thank you!

Thanks for your assist! And I appreciated that you dropped the damn thing before you got it installed because, with my husband depressing the brake and me trying to push the button out of the way? The struggle was real. #truthinadvertising A few words might have been said before I finally got it seated under the switch so that it mounted. Whew! Car yoga accomplished!

I have a 2005 Sequoia This was the problem on my car, there were 2 brake stop pads I replaced both Lights Off

Thanks you vid was a big help

Thannkkkk youuuu.. it worked. Not sure why it also may have corrected an acceleration problem.

Saved me a heart attack... great vid

I have a 2003 Sequoia and this had me very worried. I went out and found the green parts all on the mat! Thank you! Kept jumping the car. I wish you could tell us the name of the part?

Thank you. This is exactly the problem I have. The rubber plate is black on my car 2000 Corolla.

When seen that in the floor bord I thought someone been eating candy in my car and it was green lol but now I know what it was thanks for the info

Thank you simple fix it also fixed my cruise control

Wow, this helped my 2004 Tundra. I am using electrical tape sticky side out until I can get the part ordered. I saw the green plastic on the floor of my truck and laughed so hard

Bro. You made my day. I wish I could venmo you some $$ and buy you lunch. Thank you!

Exactly what the problem was. Thank you!!!

I couldn't figure it out. I watched the video and looked on my floorboard and seen 2 black plastic broken pieces laying under the brake pedal.

Thank you so very much for this video. I was starting to freak out, and God led me to your video. Sure enough, I see the green bits on the floor. Thank you, and God bless you🙏🏽

That was exactly what was wrong! Thanks a bunch.

Thank you you saved me a bunch of time with this info!!

Very useful. Thank you....

Thanks for the show

You saved us God bless you

Wooow awesome, thank you!

Amazing , thankyou for helping fix the problem 🎉

awesome nailed it thats so weird to find bang on what ya want thankyou!

Much love 🎉

Save my night ❤

Earned a sub👍👍👍

Thank you

Thank you brother.

Life saver

Thanks Bro!!

Thanks, this is good stuff

It's the blinker fluid that's losing it's viscosity

Back lights will not shut off after replacing Brake cushion Stopper for 2002 Toyota Sienna. Does something need to be reset?

❤ Thanks a lot, it happened to me just like in the video and it was a simple fix also

Man i’ve had a problem with my Nissan 350z, I replaced the switch and the rubber thingy, and it still happens, but the thing is that it just happens when i turn the lights on, if im driving at night and im lights off, my break works fine, if i turn my headlights or inside dashboard lights, the break light will stay on always!

I’ve yet to go out cause it’s raining. But my 2014 Kia Sorento has brakes staying on. I herd it could be brake switch. OR the brake light I replaced about 3 weeks ago the inside of those burn out badly and short out having brake lights come on and stay. Also having the traction control car show up on the dash. On the way home from work it wasn’t on. BUT early morning going to work it is. So, tells me it’s NOT brake switch.

You're amazing. Thank you

My go to 😂unplug the battery then hook it back up

what is the name of the piece so I can find the part on Amazon?

But what is that little piece called?

Anyone ever have an issue of a clunk noise from the shifter area after replacing the stopper?

Would this sensor not allow the car to pick up speed?

What did you look up on Amazon to get that piece

Nice video. That's my problem. Where is the link for the replacement part? Found it, decent price and installation was easy.

Bravo !!

What is the part called? I just had this issue with my Toyota Tercel. I put a penny in place for the night so the lights went off. Now I’d like to order that part off Amazon but I don’t know what it’s called.

Thank you for your help

Wow! Thank you

What if after you replace the plastic piece, the problem continues ?