Motopower Car Diagnostic Tool Code Reader- Demo, Unboxing, Setup

Подписаться 16 тыс.

Просмотров 54 тыс.

50% 1

Buy this diagnostic tool on Amazon: amzn.to/3NiyFoi
*Use the above Amazon affiliate link to check out the highlighted product. If you make a purchase, you help support our channel through a small commission at no extra cost to you. Thanks so much!
Support this channel so I can make more great videos (Paypal): otcslappys@hotmail.com
In this video we check out the Motopower MP69033 Car OBD2 Scanner Code Reader. This is a great entry level Engine Fault Code Reader and Scanner, with CAN Diagnostic Scan Tool for all OBD II protocol cars since 1996. In this video we unboxed the scanner, walk through the set up process, and show you how to scan codes using our Nissan Titan. We currently have an engine fault code that needs reading and this tool was able to catch it and show us exactly what the code was. Most codes will give a brief description of the associated problem. We then needed to look up the code on the Internet to figure out the fix process. We hope this video helps you make the decision if the Motopower car diagnostic tool is right for you. Thanks for watching.
We can review your products on our channel. Contact us here for business partnerships: techtalkaccess@gmail.com
#carscanner #cars # mechanic

Опубликовано:

22 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@JherneeBrowne2014 2 года назад

I just got this today and ran a test on my Jeep to check engine light. It worked very well.

@ScottsGarage 2 года назад

Great to hear. It’s worked well for us for the last couple months now.

@johnjkizer6399 Год назад

Your actually not suppose to turn the engine on but to leave it at accessories to retrieve error codes, the engine only needs to be on if you need to retrieve live data. Peace

@SR-ir2gk 2 года назад

Thanks so much for the info on the OBD II Reader! I’ve been researching which one to buy, and I think I’m going to get the one you posted in the video. It seems to be sweet and simple. Many thanks for your help! Keep on Toyota truckin’ !!

@ScottsGarage 2 года назад

Awesome to hear. So glad we were able to make the decision a little easier. Good luck with your job. Thanks for watching.

@FORGIVENANDLOVE Год назад

My odometer is glitched cna I use this odb scan tool to see my current milage? Thanks

@susanlamprecht6404 Год назад

I have the exact same thing and my manual says to NOT turn the engine on. Curious.

@stephenm8126 Год назад

exactly wth

@jeffkinder6865 Год назад

If u are just scanning codes yea but if u are trying to get live readings like rpm and coolant temp or load value the engine would have to be running

@msgoldie111 Год назад

Also, mine says not to turn the engine on.

@kasperscream4341 2 года назад

Can the abs reset

@trixiecan2223 Год назад

So I just got mine, it's the same as yours .page 8 says turn ignition on.DO NOT start the engine. So I'm confused you started it so ,does it matter or not if the car is running.

@johnjkizer6399 Год назад

That’s what the instructions says but I find out that it does not matter, with the engine on you can retrieve live data, like rpm, engine temp for vehicles that don’t show detailed info. But just a mark, peace

@melsiwe333 Год назад

Thanks for the video! Mine won't clear codes for some reason. I can scan and find codes, but when I try to clear, it says clear failure and to turn on with the engine off. When I try to do that it says that no codes are stored. It is a P2200 code related to n0x circuit bank 1. I might be doing something wrong, but I have literally tried for hours. If you see this is there any chance you have an idea of whats going on? Thanks and nice holidays to you!

@Arvord Год назад

I have the same problem can’t figure it out

@bigmuller1 11 месяцев назад

It wont clear certain things. Like airbags.brakes abs

@Armageddon-qo4wy 10 месяцев назад

@@bigmuller1will it scan airbag light, if so, what vehicle did you use this on

@TillyOFFICIAL 7 месяцев назад

⁠@@Armageddon-qo4wyit’s not made for ABS

@icemancometh8679 Год назад

I can't figure out if I'm supposed to start my Truck or not when I use this. It says turn the nation on. There's turn the Ignition on and there's starting.

@daveclark8337 Год назад

To READ the DTC (Diagnostic Trouble Codes), you want the Key On but the engine Off. Obviously, if you want to check Live Stream data, then you'll want the engine running.

@alsonscar Год назад

All support car

@plazibat281 Год назад

Can this tool find the problem on the car even if check engine light is not on but car is not running well?

@michaelkaliski7651 Год назад

It will show any stored codes with the ignition on and show engine data when the engine is started. So yes, it may show a fault code that doesn’t cause the check engine light to come on, but there are other reasons why an engine may not be running properly which may not have a fault code such as partially blocked filters or burned valves for example.

@wqytss 6 месяцев назад

Can you erase codes without fixing the mistakes? What will happen if you just erase the code right away?

@soulfester6241 4 месяца назад

If a code gets erased and the issue isn't solved then it will pop up when the issue happens again

@staypress Год назад

I was aware that you should not turn the engine on while this device is plugged in ??

@kangalpars4186 Год назад

mileage correction do you have a program

@thomasflagg7209 7 месяцев назад

How to erase code on motopower diagnostic instrument

@Armageddon-qo4wy 11 месяцев назад

Can this scan SRS airbag light

@bigmuller1 11 месяцев назад

It wont clear any airbag.brakes and.for safety reasons

@Armageddon-qo4wy 11 месяцев назад

@@bigmuller1 I was asking if it would scan the SRS airbag light as in diagnosis

@bigmuller1 11 месяцев назад

@@Armageddon-qo4wy oops sorry yes it will

@Armageddon-qo4wy 10 месяцев назад

@@bigmuller1would you be able to do a video? Or do you know what vehicle it will work on? Mine is not scanning my BMW and Mitsubishi

@bigmuller1 10 месяцев назад

@@Armageddon-qo4wy you need a decent code reader which connects to a pc.and some fancy software....

@otterchaos666 6 месяцев назад

Watched on 1.5X speed. Pretty basic overview of one function.

@coryk.9025 9 месяцев назад

The instruction manual for this is so trash, no instructions on how to connect for live data. It says DO NOT start engine, but how the heck you supposed to get live data. Am I missing something or is it safe to start the car.