Motorize Your Bicycle | Remake Project 

🌘🌘🌘 Check out our other video HERE: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cSPv09O2zts.html

The last one would sell so much better than any available ebike

It's easy to build one from scratch like you did if you have the know how and tools at your disposal but for the rest of the world, it's easier to buy a build and slap it on a bicycle frame

Good luck with the dogs on the second bike.

The last one with the drill batteries is a work of art and convenient.

Nice ideas, I have built 2 ebikes with treadmill motors (belt drive) and they work great for the price. Its addictive salvaging junk for a DIY build!

Interesting. But if you're gonna attach a sprocket straight to the spoke intersections, expect problems sooner or later. Spokes can break from seemingly no good reason already on a proper build. Attaching a bolted on sprocket to the intersection crossovers is only gonna cause undue stresses on the spokes and also spoke rubbing wear and tear, those aren't flush surfaces. Also, don't assume anything about the bolt pattern, different rims have different spoke counts, one such spoke count is 28, which doesn't divide by 6 or 9, it divides by 7. People, if you're gonna modify your bicycles, don't make any assumptions about videos such as this one, do all your own measurements CAREFULLY. Measure 3 times and cut once is what most experienced builders will tell ya, for good reason. Edit: Also make sure you don't have the exhaust coming right onto your tires. Not saying this happened in the original video, just saying it's another thing you should look out for if trying similar modifications yourself. I feel there should have been more safety and common sense engineering information posted along with this video.

I remember adding engines to everything growing up 😁, although we ordered a clutch instead of welding one on.

Byooty beats. Soothes. Soothes even the savage Offspring Album

Cool! He even painted it Husqvarna Orange. My favorite

I have a full suspension mountain bike with a Poulan/Husqvarna chainsaw engine mounted mid frame. It used to use the rear derailleur, definitely not recommended, but it works pretty well. Gonna do some more mods later, it already has a headlight, taillight and turn signals. I'm going to change the gear ratio, love your build here.

How to the spokes fare? It seems like it would damage or off-balance them down the road.

I love videos where people do things the hard way !!

Extremely impressive

I remember as a kid, there was a magazine with ads for gas powered engines you could install on your bike. This is so cool. But, I'm now too old to be cool. Lol

The first bike needs to be sold in a kit, no welding and minimum tools

The last one is a beast 😎

Awesome skills. This show should be on tv

Мощьность вымышленая!!! А скорость с горы!!! Прямо в овраг с обрыва!!!

The power of imagination. And you dont need a shop to do this either. I like all the bikes he made. Excellent job.😊

i like the first and the last. the last one, probably good idea with gas instead of battery.

Damm 😳.. He got good skills 👍💪😎

I think you’re missing what makes bicycles cooler than cars.

The last one was freakin cool 👌

In germany, you going straigt to jail when you drive this and have fun

You bro are totally FUN!!! 🎉 😮amazing

Safety tip: never wear gloves when using a drill press

Te felicito sos un genio amigo saludos de todo ❤👍👍👍👍👍

Perfect. So simple. All can I do in our kitchen...

Your this first baycale is very good

I smiled because I'm fascinated

On the last part of the video they should have made two types of foot rest it would be useful on the last bike over all I really enjoyed the video tho looking forward to watching more videos on different bikes being together I'm currently trying to put my bike together as well with engine on it

Tenis ball tires , WOW , I wonder how good they work ?

Super Tare

واو.مدهش.عظيم .افكار راءعة . ولكني لست من مشجعي الدراجة ذات كرات التنس .هههههه. اما الدراجة الاولى والثالثة فممتازة وفكرة جميلة .خصوصا اول دراجة ذات المحرك البنزين .غير متعبة عند السياقة وسريعة . ممتاز .تابع التقدم والافكار .

First motor bicycle is a gateway to motorcycles.

He built the bike to go longer farther faster. Great 👍 work

Your patience and integrity is superb. I salute you.....swamhiji

FIGHISSIMO che bello, BRAVO 👏👏👏👏👏👏👏

A motorized bike gets you around faster. Really great for quick bike deliveries. Or for longer than normal distances.

nice welding

Pra isso eu teria que ter tempo dinheiro uma bike e todas essas ferramentas !

Bravo. Il vient de réinventer la moto. 🤣🤣🤣

In the past, 50s and 60s, could you see pushbikes with small engines everywhere in europe.

That orange was very attractive

Humans are amazing and talented

Wily el collote,te kedo brava lo boy a intentar,gracias

That’s some Mad Max shyt right there. 😮 WOW!

We need a good $200 1948 Whizzer motor kit.

Cinemark-Miracle-Playground Cinemark-Miracle-Playground Starplexs-Gametime-Playground Starplexs-Gametime-Playground

Dude I absolutely love it love it love it! I've been riding motorized bikes for 15 years now, switched up to some high-tech ebikes now, but what I just saw on the first 10 seconds of your video was pure gold! You rock dude

Ide yang cemerlang, jenius, membuat kita nyaman bersepada👍👍

I love it, especially, the last one.

Thats actually content. Thank you algorithm

Where I live this thing would normally be illegal to use on the road, it would require approval from the DMV, license plate, road tax and insurance.

The first bike has a gear ratio of about 4.5 to one. So if the engine is at 4500rpm the wheel is spinning 1000 rpm. So the 26 in wheel has a circumference of about 82 inches which would travel about 6666 feet per minute, times 60 minutes and divide by 5280 ft come to about 75mph. The max speed of this 25.4cc engine is likely less than 30mph? which would put this engine at about 2000 rpm. What am I missing? without a jackshaft with extra reduction these types of vehicles have a gearing almost the diameter of the wheel. Think of a friction drive bike which will have a roller less than 2 inch diameter, spinning an the circumference of the entire tire.

just DON'T try to ride in the rain..with those painted tires..

Parabéns pelo seu trabalho gostei e muito top

Last one was too smooth...

Good idea motors....

Beautiful and professional book. I like this car

Konkret benzin motor respekt ! Elektrik no god !

Firts time to watch your video today 6/5/2033 I'm totally amaze.

Ingénieur 👍💪

The painting of the tires gave me a frown.

I commuted on one of these for about 6 months. Until my mechanic friend said “Any torque applied to your bike spokes and not your hub. Is a ticking time bomb.” You really have to replace wheels often with this method, and wear a helmet.

this is a real wretchedness of the mind, an electric bicycle, and it is not clear what it is

What are the materials?

7:14 thats kind of cool

😂😂 When he did the 2 x bike wheels inside the car wheel. I thought how painful pedalling was dam bro be adding weight

Três projetos Top !!!

Tennis ball cool till pack of Retrievers sees them you'll be walking home.

I like that sprocket

Wow, soon as I saw you bolting that project through the spokes I just shut it off.

You know if you put it on the front sprocket, it gives you full range of gears to go with it??

ever thought of running engine output into a geared rear wheel hub? shimano's 3 speed thingy should work for a nice gear reduction, a direct drive and an acceleration.

Should have put the motor in the center of the bicycle attach a gear to the left side of the crankshaft where the pedals are attached remove the pedals as well and then you still get your gearing ratio on the other side so you can still shift gears and get better speeds or torque depending on the need setting it up the way that these guys did by attaching it to the rear tire off-center make the bike lean more to one side because of the extra weight and then you have to deal with that while riding How the gearing is you will not get much speed tiny wheel turning big wheel Also the way that the gear is attached to the rear tire will eventually cause it to break

It's the Jesús sandals for me...

Good idea, nice job, joyful music-video. Thanks.

Muito bom, bom trabalho mesmo, essa eu gostaria de ter

Thanks

Хорошая идея с мотором. Но думаю спицы полетят на не ровной дороге .

Kereeen

Superbe idée ,mec t'es un bon toi👍👍👍

Very good work.

That's my kind of exercise 😊

Ohhh gees....another tweaker bike but better😅.luv it

Третий вариант лучший👍💯

What a Legend!

Hey that last one was super cool

I love that bicycle..goodwork

dunno man for some reason l likes that second one, the orange bike, lawn chair seat.. nice

Great colors too.

That was cool but the weight on the back wheel makes it harder to control at lower speeds, like when starting and stopping. Especially since the weight is on one side. I've been wanting to add a engine to my bicycle but I definitely don't want to lose the function of the gear shift. That would slow me down. Peddling while riding let's you accelerates faster.

That motor is really cool.

liked the last one.

Wearing a helmet and flip flops, on a motorized bicycle. Very smart!

That's bananas!!

Тот русский коментарий!!!Большую звезду на спицы ну да ну да!!!

Buenos vídeos cargados de grandes ideas