@@marcustaylor3943 I also typed a response to your other comment. But yes, we offer mounting solutions that accommodate module-level power electronics. Visit our website at S-5.com, or you can reach out to support@S-5.com for help finding the right mounting solution for microinverters and optimizers. If you send me an email at kim@S-5.com, I can send you over a few photos showing examples of these BOS mounted. Thanks for watching!
@@marcustaylor3943 Typically they would be mounted to the module frame prior to installation of the module. In some cases micro-inverters can be attached directly to the roof with a clamp or bracket.
@@marcustaylor3943 I would like to send you pictures on mounting process but it won't allow them in here. Can you email me jhaddock@s-5.com and I will give you the info you need.
I've got a trapezoidal roof like shown at 0:26+, not the ridge shown later. Specifically, what hardware combination do I need? I see the bottom bracket here www.ecodirect.com/S-5-RibBracket-III-Bracket-Mount-for-metal-roof-p/s-5-ribbracket-3.htm, but what about the top part and prices? What is special about the "protea bracket?" Also, is the whitish goo caulking and for what purpose? THANKS!
You’ll want to use a grounding lug on each section of bonded sub-array or array. Our PVKIT will bond each column of modules, and by using a bonding jumper (or similar) to bond column to column, the entire sub-array will be bonded. Then, a grounding lug can be used to run a copper wire to ground. The grounding lug can attach to a module frame or a PVKIT disk. Grounding lugs, bonding jumpers, and other useful solar hardware can be found on the hardware section of our website (www.s-5.com/hardware), and can be purchased through our distributors.
S-5! makes a range of brackets for exposed fastened corrugated and trapezoidal roofs. Please see the link below to view them all and let us know if you have any questions by emailing support@s-5.com. www.s-5.com/products/metal-roof-brackets
EPDM rubber has long been used as a gasket material for metals roof and is also used as a roofing material all itself because of its excellent durability to hot / cold cycles and resistance to UV rays. When the EPDM gasket is protected from UV rays as it is under our brackets and under the screw washers it can easily be expected to last the life of the roof. S-5 only uses the highest quality materials in the construction of our products and we stand behind all of them with our Lifetime Workmanship Warranty. If you have any other questions please email us at support@s-5.com.