I'm building my PC and I just realized that i have two of these ports on my motherboard! I originally thought it only had the 12v port but I'm so happy I found out about this! Now I can get those crazy rgb lights!
How do you connect your aRGB case fan that's included in your Vampiric 100R case? I have the 3 pin wire connected to the controller built into the front panel, which lights the fan up just fine but fan doesnt spin. There's also a 3 hole connector on the fan which looks like every other 12v sysfan connector I've seen. Your instructions says plug it into the sysfan slot. But everything online says don't plug 5v argb fans into 12v slots. Where does the 3 hole wire go? And what am I missing that the fan won't spin?
Where could i get a argb to jrainbow adapter? I have a msi z490 gaming edge wifi and a galahad aio 240. Can somebody tell me what adapters i need for rgb and where i can get them? Thank you
I also have 12V+ GRB in my motherboard but there are no male pins soldered in the motherboard to connect RGBs female pin. What should I do now? Please please anyone help me!
I have an asus motherboard and I have a 3 way adapter from the motherboard the rgb works but I don't think there bright enough the connector is 4 pin while the fNs are 3
What is the adapter cable called for argb strip, I have a thermaltake h200 and msi b450 gaming pro carbon ac mobo, so where shall i connect that cable????
I have a A320M PRO-E motherboard, and no connector on it; but website say it have such connector, and on the download section of my motherboard there's the software for control RGB functions. So, false informations? error?
@@zKarma can you buy them seperately from somewhere though? (The pc case im planning on getting has argb fans+case rgb) and it doesnt come with ant adapters according to the website
@@Batkudev yeah buy this on newegg "Phanteks PH-CB-DRGB3P_MB 3 Pin Digital RGB LED 600mm Extension Adapter Cable for Motherboard - Black" It has two different connections at the end, just use the one you need
bruh i have a MSI H410M PRO motherboard. There is a place mark JRGB1 but there are no pins.. what should i do? (This is literally my first pc in ages.. im kinda new to pc stuff)
I have 3 led strips that are from an NZXT Hue 1 and from what I see they are 5v, but I see that they have 4 pins, not 3 (I suppose that 4 would be what the Hue command itself for) Right or wrong?
Well, i have Phanteks LED Strips, that comes with a connector like ARGB but has 4 pins instead of 3, while the adapter that came with my Z390 MPG is only 3 pins. Isn't there any adapter for Phanteks LED Strips to with with the new MSI boards?
This might be late to answer but I found a motherboard RGB hub which also functions as a nice adapter for lots of incompatible Phanteks RGB products; DEEPCOOL RGB Convertor, 5V ADD-RGB to 12V RGB Transfer Hub, Motherboard with 12V 4-pin Header can Contorl 5V ADD-RGB Products
@@keno8130 thanks for your help. i have just checked it, but it looks like it's a complete controlling unit, while i need only a connector to plug Phanteks RBG to my MOBO.
@@Belboll I've bought a phanteks neon strip, I guess I just put in into any 5v argb jrainbow connectors and it will work? Will I be able to control it via msi mystic? Thanks in advance.
@@Belboll Cool. Thanks for answering. I bought an M5 phanteks neon strip and on the back of its packaging it says "msi rainbow, asus addressable". Was thinking it is only has a rainbow colours effect and it is not supported by msi mobo. Googled it and a lot of people say this strips aren't working at all. Whaat? Got vacations starting on Monday, so will try to get it all together, now all parts of new pc are just scattered on the floor )) Too bad if it's only rainbow-colored though..
Do you have one corsair led strip? If yes: how?!? Those are normally not per one available. This video is wrong I think. You need to purchase the Lightning Node Pro and connect that to Jcorsair1. Then you can connect up to 4 ledstrips per LED channel on the Lightning Node Pro (by connecting them to each other). Then you can control them via iCue or LINK.
Your control centre for mystic lighting simply doesnt work at all. its buggy and crashes all the time, and wont control my Corsair RGB lights on my Z590 Gaming Carbon mobo
@@acidopcodes I have a Z370-A Pro, but still facing this issue - ibb.co/kGJrL9x #MSI can you help me? I bought this board in 2020 during lockdown. still in warranty let me know what to do?
To everyone: Read the printed labels on the motherboard. 'New' Intel RTD3 Connector (JRTD3) uses same TYPE of 3-pin header as Corsair does with their JCORSAIR1 header. Dont get jebaited.
Nope, I have the same motherboard and the motherboard has 4 pin, 12v connectors. The fans you have are DRGB/ARGB fans which require a 3 pin 5v ARGB header.
I have a Z370-A Pro, but still facing this issue - ibb.co/kGJrL9x #MSI can you help me? I bought this board in 2020 during lockdown. still in warranty let me know what to do?
am heavy panicing right now my motherboard doesn t have theses headers (it s a h110m pro vd maybe it s an older model and it s called differently or maybe it doesn t have thems all together can someone clarify this for me ??)
