Ultimate Guide To RGB Controllers And Adapters

Подписаться 75 тыс.

Просмотров 124 тыс.

50% 1

Getting started with SignalRGB: signalrgb.com/blog/syncing-rg...
This video will cover the difference between addressable 5v and non-addressable 12v RGB. (3-pin ARGB/DRGB vs 4-pin RGB), the difference between an RGB controller and an RGB hub, the difference between proprietary and non-proprietary controllers and devices, the limitations of RGB controllers, the setup of RGB controllers, what every controller looks like in SignalRGB, and which RGB adapter cables to buy. We'll cover controllers from the following brands: Corsair, Razer, Aquacomputer, Thermaltake, NZXT, Cooler Master, and Lian Li.
Download SignalRGB to control and sync your devices: signalrgb.com/
Adapter Cables:
Angitu Adapter Cables: amzn.to/3EClGvQ
Airgoo Adapter Cables: amzn.to/3LmqbhX
SL Infinity Adapter Cable: ebay.to/3uTXAI3
NZXT to Corsair 3 Pin: bit.ly/3hx8gJK
NZXT to Corsair 4 Pin: bit.ly/3Puipn2
NZXT to 5v 3 Pin ARGB: ebay.to/3PMw9K9
Pirate Dog Tech: bit.ly/3W5etvf
Internal USB Expansion:
NZXT Internal USB Hub: amzn.to/3Pm6Yyd
Cheap Internal USB Hub: amzn.to/3LnDQp5
Individual Controllers:
Corsair Commander Core XT: amzn.to/3reUkJa
Razer Chroma Addressable RGB Controller: amzn.to/3LpnWup
Aquacomputer Farbwerk 360: bit.ly/3BFoA1Z
Cooler Master Gen 2 LED Controller A1: amzn.to/3RlNa0c
Zalman Z Sync: amzn.to/3LqalCO
Farbwerk 360 Instructions: srgbmods.net/farbwerk/
0:00 Introduction
0:34 5v vs 12v Headers
1:24 Controller vs Hub
2:13 Proprietary vs Non-proprietary
2:43 Razer Chroma ARGB Controller
3:15 Cooler Master Gen 2 ARGB Controller A1
3:38 Aqua Computer Farbwerk 360
4:20 Zalman Z Sync
5:03 Corsair Controllers
8:29 Lian Li Controllers
12:38 Thermaltake Controllers
13:32 NZXT Controllers
13:55 Adapter Cables
#RGB #gamingpc #pcgaming #pcmasterrace #pcs #gamer #gaming

Игры

Опубликовано:

6 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 339

@SignalRGB Год назад

Important: While you can connect 12 QL fans on the Lighting Node Pro, and the Commander Pro controllers, It's only possible if you use SignalRGB, iCUE will only let you do 6 QL fans on the Lighting Node Pro and the Commander Pro. You also will experience laggy effects if you connected 12 QL fans on the Lighting Node Pro and Commander Pro, so we still recommended the Commander Core XT which doesn't have this issue. However, you can run 12 of any other Corsair fans on the Lighting Node Pro and Commander Pro without any lag issues.

@mariusstoica2289 Год назад

How do you connect 2 Commander Core controllers for multiple vents?

@SignalRGB Год назад

@@mariusstoica2289 Can you explain what you mean by that?

@mariusstoica2289 Год назад

@@SignalRGB so I have 2 commander core and I want to use them both. Is that possible?

@furkangunes9508 Год назад

@@SignalRGB dude' Is it compatible with the back-of-monitor ambience for Philips hue?

@Theodore638 Год назад

Can you guys help me connect my Lian li al120 fans to the razer chroma argb controller

@raphaeloliveira3615 7 месяцев назад

I was like: why signal rgb doens't recognize my coolmoon controller? After this video: it's just a splitter LOL

@fadillah6014 Месяц назад

Which type you had? I planned to buy from that brand aswell

@raphaeloliveira3615 Месяц назад

@@fadillah6014 The coolmoon splitter is kinda nice, but Signal RGB only sees it as a splitter. It going to duplicate whatever effect you're trying to all stuff connected to the coolmoon controller. I have the simple one, the non music type.

@snakeeyes7101 Год назад

One of the most comprehensive guides I've seen out there for RGB lighting across the board. SignalRGB just keeps standing out. Cheers!

@dennisheusschen7273 10 месяцев назад

it also stands out when looking at ram usage.

@user-ys5xy3um9o 10 месяцев назад

Just like a lot of the comments I'm just reiterating - you've done a comprehensive and scientifically laid out video here in a short timeframe. Thanks very much.

@UHateDatImLoved Год назад

They need to pay you that bag!!! Straight to the point, clear voice…you’re dope man

@AndyRicAudio 3 месяца назад

I’ve been searching all over the internet for this information without success and then I find this video! Thank you so much!

@Kallenikkun Год назад

Finally, this is what i need 😭

@styxce3968 11 месяцев назад

To the point, and extraordinarily informative. 10/10

@andiwolf3334 Год назад

Thank you SO much, after about 2h of searching and finding noone talking about the difference between splitting and daisy chaining, I finally got my answers and also so many solutions to my problem :) Thanks!

@deanobuzz372 10 месяцев назад

Good to see you still leading the show with rgb tech.. love all you do man.. still happily sending money your way.

@nkuete Год назад

this is UNBELIEVABLY helpful. I've wanted to get in to Signal RGB for a long long time and this is taking a lot of the confusion away.

@kasqua1042 Год назад

One of the most useful guides on this topic!

@1nvasive Год назад

Thanks this was so useful and it's something that other companies should do

@bladerjareerofficial2436 Год назад

U got skills plus everything was detailed perfectly!!

@apexsplash5088 Месяц назад

This has been the most informative video I've watched in the past 4 months of watching computer building guides to help with my first PC build

@AntisepticHandwash 6 месяцев назад

Excellent video. Systematic and concise while being comprehensive.

@592Johno Год назад

This is the video I absolutely needed. This answers all my questions finally!! I plan on getting Arctic p12s ARGB with Razers RGB controller. Noctua-ish performance + top tier RGB effects wo using crappy, confusing, proprietary controllers.

@kevinob6384 Год назад

thats what im tryna do

@biszarr1513 Год назад

solid combo; I have the fans in my pc so I just need the controller

@andrewmcmillions3138 Год назад

@@biszarr1513 I'm in the same boat, I have the arctic p12 fans in my pc I just need the controller. Are you guys happy with your razers controller with the Arctic fans?

@biszarr1513 Год назад

@@andrewmcmillions3138 I'm glad you asked this because I recently found out these things have true daisy chain so you dn't need the controller! just daisy chain them to an rgb port and you will have individual control

@andrewmcmillions3138 Год назад

@@biszarr1513 yes I love that they are daisy chain, sadly though my motherboard doesn't have a-rgb port and that's why I need the controller :/ might just get a new motherboard soon, mine is like 7 years old, it's a gigabyte

@AnotherAnonymousMan 7 месяцев назад

Genuinely outstanding work. Thanks!👏👏👏

@Zach-jz7vh Год назад

Awesome, very helpful video! keep up the great content!!!

@GameIT. Год назад

Thanks! very helpful for my future builds/upgrades.

@Theorica Год назад

I just recently discovered this software and love it! Using it on 3 different systems. My kids and my own. I've recommended it to a few friends as well. While the kids are using the free version, I decided to subscribe (I do really despise subscriptions! Though, this one is quite reasonable). I chose to help support the effort over my reservations on subs. ;) I can confirm that this works using the 'upHere 5V 3Pin ARGB PWM Fan Hub' (I think it is called the P7P) with a bit of configuration. It was flawless with my Cooler Master A1 V2 ARGB controller. Glad I found this software.

@delgaldo2 4 месяца назад

exactly the information I was looking for. Thx! 👍

@palisocm001 Месяц назад

thank you for the explanations and links.

@TheBrewjo 6 месяцев назад

Thanks mate, this is the video I needed. Last year I jumped into my first new PC in several years with the Corsair 7000X. Now I'm building a new PC for a family member on a budget and they want the rainbow spewing unicorn effects as well (on a budget). The Corsair ARGB is so good it's flaw is I didn't have to learn anything haha!

@peterc5544 2 месяца назад

i was looking for this video i need some adapters to work,thanks very helpfull

@burtpanzer Год назад

Very informative for such a highly complex topic. Only thing I think it may have missed was the problematic use of Y splitters and hubs.

@SignalRGB Год назад

I covered that hubs are basically just splitters that dont offer individual rgb control. At the very start of the video.

@cannonball_Z Год назад

thanks for this!

@RedxAx2 Год назад

Neeeeeed it, thanks, its a critical thing that many companies should do it

@emptyingthecup 6 месяцев назад

Great video. Perhaps I missed it but do you require both a hub and a controller? My mobo does not have argb headers, so I purchased the Razer Chroma hub, which has 3 pin male heads. However, the argb fans I purchased have 6 pin female heads, but it comes with a controller, which has a sata cable and a 3 pin female head, which can connect to the Razer Chroma hub. I was hoping to connect the fans directly to the Razer Chroma instead of going through a controller which then goes to the hub, but I'm not sure if there would be an incompatibility of voltages. Also, it seems a bit difficult relatively to find 3 pin argb fans.

@CountDabulaTV Год назад

Thanks so much for this helpful video, I learned a lot! But I have one question, what about Phanteks fans? They come with a non standard plug that looks like the 3 pin rgb Lian Li plugs, would it be possible to use one of the Lian Li ARGB controller with Phanteks fans? Or should I buy six adapter cables and the Razer RGB controller separately? They look like they would fit in the AirGoo adapters.

@tropicthunder332 7 месяцев назад

Razer Chroma ARGB Controller works like a charm😊

@grrrmuffman Год назад

I love what you guys are doing here, the only reason I'm not using SignalRGB is the damn Strimmer V2 full control. Looking at the Arduino board work around and don't even know if that'll help 😔

@MultiSciGeek 7 месяцев назад

Excellent tutorial! However, I have RGB fans but not the controller box. Can I still connect them in that RGB pin setup where all of them light up the same? Secondly do super cheap motherboards even support this option?

@youngsavage8217 9 месяцев назад

Omfg THANK YOU dude ❤ I’m looking for a simple explanation for 10000000h 😂😂

@qulien7123 Год назад

This was a nice deep dive into RBG controllers, but didn't answer a question I have. Some RGB fans come with additional SATA power plug. I never know if this is necessary, or if the regular fan + argb header on the motherboard will suffice. For example, I have an AIO with RGB fans. It comes with a little controller that lets you change the colors and color modes physically, but you have to connect it to SATA power. However, you can then disconnect that connector and the LEDs will remember the set colors and still work. Recently, I bought a new AIO, which has an ARGB connector, as well as the regular fan connector, and also SATA power. With this one, I was hoping I could completely forgoe the SATA cable, as the ARGB connection to the motherboard should enable me to control the fans this way. However, with this one, the LEDs won't light up _at all_ unless the SATA is also connected. I don't understand that. And I don't understand how to figure these things out before buying RGB stuff. I would appreciate any help, insight, resources.

@speedracer9132 Год назад

Which hub would you recommend if all I want is an ARGB fan splitter to have 6 fans on my Arctic 420 AIO used with the Asus B650EF matching fan speed and ARGB? I’ll also be using 4 phanteks case fans, I’m wondering which RGB software is low resource intensive and works well with my parts?

@ohiocitydave Год назад

God I wish I saw this before making my first rgb build. Would have saved me so much headache, frustration, a bundle of cash, and having random cables and adapters now strewn about my apartment.

@rmbeavers 7 месяцев назад

Thanks for this video! I have purchased 10x new Corsair QX120's. Any idea if the HUB included in the 3-pack of fans can control all 10 via the daisy chain or do I need something additional?

@marcelonox5002 11 месяцев назад

Thanks for the video. I'm still confused though. I've recently purchased a Cooler Master HAF 700 which includes an internal ARGB controller. The problem is that while it lets me control fans led, fans rpm are always stuck to 100%, which is frustrating. My question is if there's any solution to this. Like a ARGB fan hub that can actually control fan speeds over the motherboard or any other way. I'd really appreciatte any suggestions.

@Nathanduong0122 8 месяцев назад

Thanks for the video. I got - x3 groups of lianli Sl fans v2 -> 1controller -> MB usb - x2 strimer v2 -> 1controller -> MB usb - x1 LED phanteks strip M1 -> 5v RGB header Those LianLi fans and strimers got lag, not smoothly So what would you recommend for the best performance in RGBsignal? Thank you so much

@dansiltala283 Год назад

At 10:50 for lian li fans I can get no lag with the 3pin 5v, that's good to hear, my only question is for fan control should I use the 2pin fan connector or the usb header?

@samiijay93 5 месяцев назад

Question! How do I control more than 6 fans? I have 6 (AF120)fans connected to a Commander Core and 2(QL140) fans connected directly to the mobo CHA1 and CHA2 with the RGB cables going to a Corsair fan LED hub.

@K0NVICTx Год назад

What about Thermaltake TT Sync Controller? I use that with my 3 Riing Trio Fans. Do you plan on supporting either of those products? Right now I just selected a diff TT fan & SignalRGB works alright. But could be better.

@aricjordan1885 Год назад

Hello, I have some questions. I watched your build video with lian li infinity fans and you used 3 controllers why is that? Also where do they plug into?

@TheWirkkalaShow 2 месяца назад

I’m a dork. I forgot to allocate my Corsair fans. I got it now though 👍 this software is great

@246Dron Год назад

Hello. There are eleven fans in my case. To make them all work independently, can I use the Rizer chroma argb controller? I think you need two controllers. If I connect them, will they work independently of each other or repeat each other? Sorry for my language.

@Spoodily Год назад

I have several groups of 4 Lian Li Inf 120 fans I need to hook up. I was going to use the razer chroma hub but it has an 80 led per port limit and I need 160 led per port.

@ratimajciugrobu Год назад

Nice video

@icemangaming5135 Год назад

Hi great video, 1st off can you guys do a comprehensive video on the Aqua Farbwerk stuff as they seem to be one of the best options for syncing rgb outside your case, Also you say the Corsair commander core xt can control 264 leds out of the box but you don't cover individual ports, can it control say 120 leds on one port?

@Iconguy24 2 месяца назад

What about lianli 216 case ..the hub which comes along with case is that just splitter or a geniune hub to control each fan individually?

@spydorocraft Год назад

whats about the hub included in some be quiet products like the 500fx or the pure loop 2 fx?

@Justacommentorian Год назад

Absolutely love this software! Got a 3.5k build and am worried! Will it work with my RGB items? ASUS AMD Graphic’s Card, ROG Motherboard, Corsair CPU cooler and QL120 fans and Corsair RAM ddr5

@Isaacdavis151 4 месяца назад

Hi, new pc guy here! I ordered the Corsair 4000x (I believe you said it has the node core) and a deepcool ls520 se aio. Is there a way to connect the aio to the node core to sync all the rgb?

@lylahsworld3930 Год назад

Is there a special type of fan to use? Because some rgb fans come with remotes, and others only use the rainbiw effect, what type of fans should i be using? Argb? Regular rgb? 4 pin? 3 pin? Thanks in advance, and also, any budget 6 pack (or two sets of 3) of rgb fans that you could recommend?

@LUCIfer_72 Год назад

Best software ever ❤❤

@RyaNGamingYTube 9 месяцев назад

Excellent bro!!!

@usauas9703 Год назад

Just stumbled across your channel - super informative. I’m not a RGB guru… just a newbie. Crazy question for a unique setup: I want a computer case that I’m fitting with my small network switch, NAS, dvd burner, etc. (basically all the wired minutia from my desk). I want to outfit it with RGB lighting and fans to make it look cool and keep it cool. I am already committed to the Corsair ecosystem. Is there a way I can use the XT controller (perhaps) and plug it into my Mac via a USB adapter so that iCue will see it and manipulate it? Crazy question huh? I’m open to all newbie level suggestions….. thank you!!!

@austinharding9734 Месяц назад

dude that was thee most ultimate video ive seen for any ultimate topic with thee most ultimate description i have ultimately watched, it ultimately answered every question in the most ultimate manner, but more importantly concise an thorough what can i call you Mr. Ultimo, Dr. Ultimately, or the know-it-all~timate guy? ill be honest i still have a question plus a comment, 1st what IS Signal RGB? i thought i only needed to download icue to get the controller up and running? anybody? comment, the commander pro xt has the 4 pin rgb, but it has 2 different ports on the side, a different 4 pin, and another 3 pin, i think the one you missed says ID on it which instructions jus say any compatible corsair device, but this out too, i have 3 corsair fans which have a 3 pin connector that does NOT fit anywhere on the commander pro xt, its a tiny 3 pin with a notch on bottom left where commanders 3 pin has 2 notches on bottom, so with adapters i have everything non corsair hooked up all except the only corsair fans i have which cant connect, i think ther called hydro idk im pretty sure there corsair

@SignalRGB Месяц назад

SignalRGB is our alternative RGB application that works for all brands

@austinharding9734 Месяц назад

@@SignalRGB thank you yea that 3 pin i thought was for a corsair was actually to a thermaltake so... thang i dont get is these companies surely must know there are workarounds to there proprietary bull crap so why do they continue to use them? i think either they get enough newbies that dont know bout it and assume they must commit or ther jus lazy an dont want to spend the extta money in productiin costs to switch them to universal, took an act of congress to force cell companies to standardize phone chargers may need that agaim, i just assumed ISO or ASM... had that authority tho

@CharlesSmith-io9fp 8 месяцев назад

Does SignalRGB have a program that lets you control RGB colors via temperature probes? One color at cooler temps like say a light blue, and change to a red color at higher temp?

@EJ-en5xl Год назад

@SignalRGB - My commander core controller has a H150i elite capellix aio and I can't seem to figure out how you control the pump RGB lighting. I tried to add it as a device tied to the controller but nothing happens when i change the settings.

@rahathossain2802 5 месяцев назад

Can I connect the rgb adapter from the node pro to the rgb hub and use non-corsair connected to the hub? (I have the corsair carbide spec omega rgb case btw)

@ytice695 11 месяцев назад

Do you know if I can control the rgb on the fans on my cougar duoface case

@Rageousss Год назад

Will SignalRGB ever be able to control the Strimmer Plus with multiple effects instead of the single strip?

@Ar7eM1u5 5 месяцев назад

I have a question , sorry in advance if it has alrdy been brought up : Does Signal recognize and use properly, two separate Razer Chroma Controllers installed in a system?

@TheZtreet 9 месяцев назад

Hi is there one adapter to control with some software (open RGB, aura sync, ice etc)your rgb or argb LEDs without a rgb or argb header ?

@graelstream2353 6 месяцев назад

Would combining the Razer chroma addressable rgb and the Razer PWM fan controller be possible? Im considering ordering both for my EKWB EK Fan loop 120mm and 140mm fans as well as the EKWB EK nucleus...

@oskartorres8408 Год назад

I have cooler msste jalo 3 in 1, so Is better to use the hub inset tonconmect the fans in chain directly tl the mother board?😊

@deanpartridge9545 3 месяца назад

@signalrgb would the phanteks drgb hub work with 8 lian li sl120 v2 fans connected to motherboard

@anthonymorin3459 Год назад

is there a adapter to covert a fans like the CT120/140 that has the 3pin5v connector and 4pin PWM fan, to the Thermaltake connector that looks like a USB connector. I saw a video awhile that you can plug in the seperate cables into a TT controller that comes with TT fans, but I don't remember where I found it.

@lucaschristian6442 3 месяца назад

I can't find any of the ARGB controllers mentioned, just the cooler master argb+pwm hub, which I believe is not possible to configure each argb individually

@jjhayyap 7 месяцев назад

Hi sorry long question. I have an NZXT H5 Elite case. The RGB hub preinstalled is already full. It can only take 3 connections. The two from the front fans and one from my NZXT Kraken Z53. I bought a new NZXT F120 RGB Duo to use as exhaust at the rear part of my case. I connected the fan wire to the chasis header of my MB and the RGB wire to the argb header on my MB. The fan spins but the light is only switching from Red and Green. It is syncing with Asus Aura sync but the color is only Red and Green. Do you know what the issue is? Thanks

@huseyinakkoc1062 Год назад

i was looking everywhere for this info and couldnot find any usefull or correct info and after 10 hour this video was released too thank you, it was a need. by the way i wanna ask something. i have msi b550 edge have 2 port but signal argb see only 1 rainbow port. why is this happenig? i afraid of this to happen when ı buy razer controller too

@fuzzyjeffrey1705 11 месяцев назад

Hi, I am getting the nzxt h5 elite case (which comes with 2 fans.) it comes with nzxt's rgb controller but would I be able to plug in a corsair rgb AIO into it and still get the rgb effects?

@aaaaaaaceshigh10 Год назад

I recently got the firmware from my MSI MOBO corrupted with the led abnormal issue. I was thinking in bypass the problem buying a ARGB controller. The thing is that my ARGB fans, the Thermalright TL-C12C, are not supported by SignalRGB. If I connect this non supported fans to some non propietary ARGB controller, like the Razer Chroma, will I be able to control the fans inside SignalRGB?

@bme7491 Год назад

Ultimate guide is right.

@eseb1ghu3ro 6 месяцев назад

i may have missed it or misunderstood but i can connect the lian li strimer controller to a razer chroma controller is that right?

@socaldayve6684 Год назад

0:38 My old B450 Aorus mobo has two 4-pin headers labeled "D_LED" that can be toggled between 5v or 12v. I was always confused as to whether these are compatible with ARGB products. From your description, the answer appears to be yes. Am I understanding this correctly?

@balintApizza Год назад

probably not but I would try googling it

@Emil_m 5 месяцев назад

Are there any RGB Hubs that can be set via software but then store all the settings on board (meaning you can uninstall software and the settings remain throughout PC boot or different OS)? I'm getting B650 AORUS ELITE AX that has Fusion software, but that has to be run also and there seems to be no bios-level settings to control for RGB? (will check once I get the mb). But still, would be nice to have the best of both worlds - change settings via software, AND have them saved through hardware.

@Paco8478 6 месяцев назад

Hi man, are there any RGB 4pin and PWR hub you know about? every one I find is ARGB 3pin but the only that is for 4pin is the Corsair one which is property and my fans are RGB from cooler master

@giachy_2311 9 месяцев назад

hi, could you add at the devices the gelid liquid 240?

@eliter8770 Год назад

Hey, So I recently got my hands on some nice UNI Fans V2s, however the new controller from lian li seems to be different from the inside, since in SignalRGB it says that this device is still unsupported. When I turn on Mobo Lighting Sync in L-Connect 3 it lets me use the rgb headers on the motherboard, still I cant configure different channels on my mobo because theres simply the button for it not there. What I have right now is basically all Fans having all the same color and no diversity. Since the controller is unsupported currently, will a Plugin for the new V2 controller fix these issues?

@burstdragon3233 4 месяца назад

I have the Lian-Li controller V2 with AL120 V2 fans, how do I set them up for signal?

@joemanjbm Год назад

Can you use unsupported fans with a supported controller for dodge rgb or no

@hpzeledon8672 Год назад

The SC700 of DeepCool is compatible with SignalRGB???

@UrbanAstronomer 11 месяцев назад

Okay so i bought a RGB fan controller that has 6pin headers for the fans, and a 3-pin header for Motherboard connection. And a sata connection for power. Does the 3-pin header that goes to the addressable header on the motherboard also control fan speed? The fans are just spinning at max speed all the time now.

@gonfreecs2212 3 месяца назад

Please help,if my motherboard and pc case does not have an rgb header or button..can I still control all the fans lights ?

@philipjrrobledo7284 11 месяцев назад

hi. does the MSI ADDRESSABLE RGB CONTROL BOX work? like can it control each fan RGB?

@MichalB-n1ew1em 8 месяцев назад

How many channels can i connect to the lian li sl infinity controller before it starts lagging?

@kassabro7919 9 месяцев назад

do you know about 6pin fan connectors ?

@rinse3x Год назад

on the site it says signalrgb is compatible with icue h100i cooler, does that include the RGB version? Im using signalpro, everything is working great except the AIO.

@coltonkoepp655 11 месяцев назад

So question about the Unifan to generic 5v 3pin adapter cable is that needed on a per fan basis or if you use the magnetic daisy chaining 1 cable per 3 fans

@SignalRGB 11 месяцев назад

1 cable per 3 fans

@brunopradomusic 11 месяцев назад

thanks for the content. I have 10 lian li sl120 and I can't figure out what to do to control them independently on signal rgb. I tried connecting directly to the motherboard, to a corsair node pro and no success. When I tell signal rgb to add a sl fan, a unifan or even custom rgb...it adds 4 fans at the same time...but from different groups. I'm getting crazy here cause the lian li are my favourite fans but by far the worst when regards to software or workaround with signal rgb. I have another PC with 10 corsair LL120 and it works like a charm. Could you help me with this one?

@MOHAMED_IRAQ_98 3 месяца назад

I have nzxt f140mm duo They come with 4 pin rgb and 4pin pwm... I want a hub for them I can't find one .. could you tell me if their is hub comes with 5v,12v and pwm

@KtZoe04 11 месяцев назад

Can I customize my lcd screen on my nzxt kraken elite rgb using signalrgb?

@CharlesSmith-io9fp 3 месяца назад

Is there any reason that I shouldn't use a Corsair Internal 4-Port USB 2.0 Hub | 4X 9-Pin USB 2.0 Ports | instead of the NZXT Internal USB Hub 3 | AC-IUSBH-M3 | 4 Internal USB 2.0 Ports? I have all kinds of Corsair equipment from 2 previous PC builds. I want to thank you for the section on adapter cables that let you connect Corsair products with other brands of hubs and such. I never knew about incompatibility problems until I spent way too much on Corsair. Thanks again.

@bhavyamalik3239 9 месяцев назад

is it necessary to connect the CM A1 controller to both SATA and internal USB ? i dont have internal usb free

@unknowncalibur5242 Месяц назад

Is there an RGB controller I could use for the phantom spirit

@moisespena1314 Год назад

If I have a brand of argb fans not supported by signal rgb but have the razer controller, would it still work?

@kostbay 3 месяца назад

are there non sata powered controllers?? my rog b650a motherboard has 4 individual 7-pin ports... so i cant connect any of the corsair hubs or lian li ones. i purchased all my parts together my corsair fans arent compatible with my lian li controller and the sata port doesnt even fit as it is much bigger than a 7 pin connector i have. im obviously returning the lian li stuff. any recommendations on getting a controller that can sync 6 fans together that is not sata powered or uses a 7-pin cable??

@TenaciousGronn Год назад

The 5v, 3 pin header on my MOBO is labeled JRAINBOW1. Is this the same exact thing but just labeled differently? It's an MSI mobo so it might just be how they label things but I haven't upgraded anything in a while and never used an RGB controller before so I can't tell.