MT - 50 Label Applicator For Cans & Bottles 

Baking and brewing go hand in hand. Love that you haven’t rolled over and played dead. Instead you’ve all chosen to improve what you already have.

Just putting my labeller together. I would never have checked the earth if it was not for your video. Thank you for posting a literal life saver. Hoping to be brewing properly soon. All the very best.

Just bought one of those MT-50 labelers from Vevor (May 2024). For the money it is not too bad, but I found (what I call) the "label carousel" surgical tubing friction system to be pretty hokey. I replaced the roller shaft with a 1" diameter bar, bushed the side plates down to one inch, then used felt washers on the side against the mounting plate and a spring and shaft collar on the outside for tension. I also did not like how the liner paper rubbed on the motor under neath... so I made and added another roller between the knurled front roller and the take up roller. The factory should have mounted the motor at the back of this machine. Since everything is chain they could have mounted the motor anywhere other than where it is. Fortunately, I have the skills to do all of this. But for the price ($350 USD) you still can't beat it.

Im a photographer and I always tell my students to get that 50mm lens, it is so awesome!! Glad you are back and brewing!

That sourdough bread looked delicious,glad to see you got the label machine up and running despite the couriers. Cheers.

Thanks for these videos dude, saved my bacon! Keep doing what you're doing. Your voice is so calming on stressful brewdays, can you record audiobooks or something?

I just got mine. Thanks for the video. It helped me get set up.

Looks great the mt50

Bet you didn't think the seamer would be the long pole in the tent when you started the can filler project.

I'd have taken the fuse out of that plug before binning it... Tis a Yorkshire thing :-)

50mm f1.8 best lens in anyones kit imo and a must have . You can go lower but 1.8 is good enougj

Nice rustic loaf. It will be fun to see your reentry on July 1st, but you're poised to kill it, unless something like unavailability of some foodstuffs spoils the party. Hoping for the best! Cheers!

HB sourdough for the restaurant would be a good upsell. Labeler looks the good despite all the flaws that it came with. You'll be churning through those labels in short order. Good thing it was only wasted time with the CIP, better than a damaged BK

I'm also waiting for a can seamer to arrive at my brewery here in the US. Pre-Covid, it would have already shipped.

good to see consistant Chinese quality,check everything at least twice....

Excellent progress! Has the gov shared a startup date and rules?

Like waiting for Xmas waiting the seamer but strange times strange delivery’s, labeller is the business shame you have to adjust a few parts. Shelving looking good you’ll soon need a bigger pad , one thing I’ve never done is make bread.

Thats just a standard mains kettle lead (a cheaply made one, but still.. :-D). I've got tons of them in the house from years of building PC's.

IEC13, 14 is the socket :)

Have you had to replace any fuses?

Hi, good to see a solid if not unearthed Chinese special..I have a question for you. What is the maximum width a label roll could fit on the feeder roller?

My labels get cut. It worked properly for a couple of months. Any idea what it could be? Thank you

Does this do front and back labels?

Is it just that easy to add the ground wire just as you did? My labeller came the same way. I would like to use it but concerned about plugging it in.

Can you please explain how the machine stops after the label is applied? For me it just keeps going and I have to turn it off.

Another great video. Will you be shipping to Australia? I also want to have some sent to my brother in Cornwall as a late 50th birthday present.

Hello Sir, can you advice as to where you got the labels printed. Cool video

Do you think i could easily modify one of these to label plastic buckets? - They're slightly conical (issue 1) and have a rim (issue 2). Top to bottom they're 190mm plus 20mm rim. Looking at your machine, I think I could set it so the rim over hangs the side of the machine - that'd solve issue 2. But im wondering if i could replace the freewheel roller at the end (that the bottle/ bucket turns on) with 2 different diameter wheels at each end to counter the conical shape. Thoughts?

Hey! Is it possible to plug tampon on this machine ?

Hi Harry, great video!! Wish it existed when I got my machine. Wondering if you have any suggestions for getting parts repaired with them? It sounded like something snapped inside it last week and now the machine doesn’t feed the labels around. Something to do with the end roller that gathers the wastage paper.

I got MT50 but facing a problem on my wine bottles i get air bubbles tried everything any trick ?

What's happening haven't seen a video from you in a while

Hey, do you know if the MT-50 also works for transparent labels?

When are you opening the pub again NZ Brewer

Where do you get the labels buddy?

What ever happened to the idea of selling fresh wort kits?

Struggling to find it anywhere for 350 quid pal

We're having an issue with the inside roller pulling the discarded film (after label removed) at the right rate... Any suggestions? Thank you!

Hello i brought the machine but its keep moving without stop without put a bottle

We've been using this labeler for a couple years, and recently switched to plasticized labels. We're having some issues with wrinkling, even with tension adjustment. Did you run into this at all