Multi Satellite set karnay ka tarika | intelsat20 k Sath multi set up | Dish info | Luqman Dishtv
#satellitedish #dishtv #express #nss6 #videocon #yahsat52e #satellite
Multi-satellite setups involve configuring satellite dishes to receive signals from multiple satellites simultaneously. Here’s a step-by-step guide on how to set up a multi-satellite system:
#Materials Needed:
1. **Satellite Dish(es)**: You'll need a separate satellite dish for each satellite you wish to receive signals from.
2. **LNBs (Low Noise Block converters)**: One LNB for each satellite dish. LNBs capture and amplify the satellite signals before sending them to the receiver.
3. **Multi-Switch**: This device allows you to combine multiple LNB outputs into a single cable that connects to your satellite receiver.
4. **Satellite Receiver**: A satellite receiver compatible with multi-satellite reception. Some receivers have built-in capability for multiple satellites, while others require a multi-switch.
5. **Coaxial Cables**: To connect the LNBs to the multi-switch and from the multi-switch to the satellite receiver(s).
6. **Compass and Inclinometer**: To accurately point the satellite dishes towards the satellites.
#Step-by-Step Setup:
1. **Determine Satellite Positions**: Use satellite tracking websites or apps to find the azimuth (direction), elevation, and skew (tilt) angles for each satellite you want to receive signals from based on your location.
2. **Mount Satellite Dishes**: Install each satellite dish securely on a pole or wall mount, ensuring clear line-of-sight to the satellites. Use a compass to point each dish in the correct azimuth direction and an inclinometer to set the elevation angle.
3. **Attach LNBs**: Fix an LNB to the focal point of each satellite dish. Connect the coaxial cable from each LNB to the input ports on the multi-switch.
4. **Connect Multi-Switch**: Connect the output port of the multi-switch to the satellite receiver using another coaxial cable. If your receiver has multiple tuner inputs, connect each output port of the multi-switch to a separate tuner input on the receiver.
5. **Configure Satellite Receiver**: Power on your satellite receiver and access the setup or installation menu. Configure the receiver to scan for satellites and set up channels for each satellite you've aligned the dishes to.
6. **Fine-tune Alignment**: Use the receiver's signal strength and quality meters to fine-tune the alignment of each dish for optimal signal reception. Adjust azimuth, elevation, and skew angles as needed.
7. **Test and Verify**: Once aligned, perform a channel scan on your receiver to ensure you are receiving channels from all desired satellites. Check signal strength and quality for each satellite to confirm proper setup.
8. **Secure and Weatherproof**: Secure all cables and components to prevent movement or damage. Consider weatherproofing connections and components exposed to outdoor elements.
Tips for Success:
- **Patience and Precision**: Aligning multiple satellite dishes can be time-consuming. Take your time to ensure each dish is accurately pointed towards its respective satellite.
- **Check Compatibility**: Ensure your satellite receiver supports multi-satellite setups or can work with a multi-switch if required.
- **Consider Professional Installation**: If unsure or uncomfortable with DIY setup, consider hiring a professional satellite installer.
By following these steps, you can set up a multi-satellite system to receive signals from multiple satellites, expanding your access to a wider range of satellite TV channels or data services.
Facebook page follow link
www.facebook.c...
15 сен 2024
